Powermatic Associates Logo

192216 Festo Servo Pneumatic Controllers

192216 on Powermatic Associates
Festo

Part#:192216

Manufacturer:Festo

Alt. Part#:SPC11-POT-TLF

Product Lifecycle:Active

Get a quick Quote!

end-position controller SPC11-POT-TLF for type DGP/DGPL/DNCM drives. Up to two freely selectable intermediate positions are possible without fixed limit stop. Data backup: Flash memory, Control signals: (* Input, remote/teach-in/left/right, * Input, posit

About the manufacturer: Festo is one of the manufacturers that offers Servo Pneumatic Controllers that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 192216 Festo price in the box on the right side or send a quick quote.

Product Details

  • Control signals
    Remote/teach input/left/right Output, position 1/2/3/4
  • Outputs type
    as per IEC 61131-2 No galvanic isolation
  • Nominal operating voltage DC
    24 V
  • Degree of protection
    IP65 as per IEC 60529
  • Product weight
    400 g
  • Elec. connection of operating voltage, inputs and outputs
    15-pin Plug
  • Number of digital inputs
    8
  • Input current consumption
    4 mA
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Ambient temperature
    0 °C ... 50 °C
  • Cable length
    0.3 m
  • Type code
    SPC11
  • Control elements
    3 pushbuttons Touch sensitive keyboard
  • Design of inputs
    as per IEC 61131-2 No galvanic isolation
  • Max. current consumption without proportional valve
    70 mA
  • Continuous shock resistance to DIN/IEC 68 Part 2-82
    Tested as per severity level 2
  • Linear potentiometer electrical connection
    Form A
  • Data backup
    Flash memory
  • Number of digital outputs
    5
  • Max. current consumption with proportional valve
    1.1 A
  • Current rating per output
    100 mA
  • Vibration resistance to DIN/IEC 68 Part 2-6
    Tested as per severity level 1
  • Display
    3-digit Seven-segment display
  • Fuse protection for outputs
    Electronic Via sum of all outputs
  • Debounce time at inputs
    20 ms
  • Permissible voltage fluctuations
    +/- 25 %
  • Relative air humidity
    0 - 95 % Non-condensing
  • Certification
    RCM compliance mark
  • Electrical connection, proportional valve
    7-pin

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents 192216 Specs

192216 192216 DataSheet.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

ESV751N04TXC on Powermatic Associates

ESV751N04TXC

Verified stock: 2

Lenze ESV751N04TXC is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 4X IP65, with dimensions of H203mm x W160mm x D114mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP, and 1 x digital input each at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only, it has a frame size R1 with natural convection cooling (fan-less). The supply voltage is 400Vac / 480Vac, with a network frequency of 48-62 Hz (input) and 0-500 Hz (output). It does not include a communication interface, has a rated current of 2.4A (400Vac) and 2.1A (480Vac), and operates on a 3-phase network (3P / 3AC). The rated active power is 0.75kW (400-480Vac), and the rated power is 1HP (400-480Vac).

Lenze

I55AE137B1AV11003S on Powermatic Associates

I55AE137B1AV11003S

Verified stock: 60

Lenze I55AE137B1AV11003S is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter within the Drives sub-range, designed for variable speed and frequency control, compact inverter DC-injection braking, brake management for brake control, S-ramps for smooth acceleration and deceleration, flying restart circuit, and PID controller functionality. It features a built-in RFI filter, safe torque off (STO) safety standard, I.O. conformal coating, and dimensions of H155mm x W60mm x D130mm. The communication protocol supported is Modbus RTU, with protection functions including overvoltage category, leakage current, earth fault resistance, and overtemperature of motor. It has a rated current of 2.4A for heavy-duty applications at 230-240Vac, with a supply voltage of 230Vac / 240Vac. The mounting mode is suitable for control cabinet or surface/wall mounting. The ambient air temperature for operation varies with the switching frequency, allowing a maximum of 45°C at 2kHz or 4kHz and 40°C at 8kHz or 16kHz. It has an IP20 degree of protection, operates on a single-phase / 1P network with a frequency of 45-65 Hz (input) and 0-599 Hz (output), and includes 1 x analog output, multiple digital inputs with optional uses, 1 x digital output, and 2 x analog inputs with optional uses. The rated active power is 0.37kW, and the rated power is 1/2HP for heavy-duty applications at 230-240Vac.

Lenze

ESV752N04TXB on Powermatic Associates

ESV752N04TXB

Verified stock: 9

Lenze ESV752N04TXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H250mm x W130mm x D160mm. It includes 1 digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP and 4 additional digital inputs at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size H1, it supports a supply voltage of 400Vac / 480Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 16.1A (400Vac) and 14A (480Vac), and is suitable for a 3-phase (3P / 3AC) network. The rated active power is 7.5kW (400-480Vac), and the rated power is 10HP (400-480Vac).

Lenze

ESV371N01SXB on Powermatic Associates

ESV371N01SXB

Verified stock: 6

Lenze ESV371N01SXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40 °C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H190mm x W99mm x D111mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G1, it supports a supply voltage of 120Vac / 240Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 2.4A for both 120Vac and 240Vac, operates on a single-phase / 1P network, and offers a rated active power of 0.37kW and rated power of 1/2HP for the same voltage range.

Lenze

What can I help you find today?

Recommended parts

G10S0000 on Powermatic Associates

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

1

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1