Powermatic Associates Logo

192217 Festo Servo Pneumatic Controllers

192217 on Powermatic Associates
Festo

Part#:192217

Manufacturer:Festo

Alt. Part#:SPC11-POT-LWG

Product Lifecycle:Active

Get a quick Quote!

end-position controller SPC11-POT-LWG for type DNC/DSMI drives. Up to two freely selectable intermediate positions are possible without fixed limit stop. Data backup: Flash memory, Control signals: (* Input, remote/teach-in/left/right, * Input, position 1

About the manufacturer: Festo is one of the manufacturers that offers Servo Pneumatic Controllers that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 192217 Festo price in the box on the right side or send a quick quote.

Product Details

  • Control signals
    Remote/teach input/left/right Output, position 1/2/3/4
  • Number of digital outputs
    5
  • Permissible voltage fluctuations
    +/- 25 %
  • Relative air humidity
    0 - 95 % Non-condensing
  • Type code
    SPC11
  • Number of digital inputs
    8
  • Max. current consumption with proportional valve
    1.1 A
  • Continuous shock resistance to DIN/IEC 68 Part 2-82
    Tested as per severity level 2
  • Certification
    RCM compliance mark
  • Linear potentiometer electrical connection
    4-pin
  • Display
    3-digit Seven-segment display
  • Fuse protection for outputs
    Electronic Via sum of all outputs
  • Design of inputs
    as per IEC 61131-2 No galvanic isolation
  • Nominal operating voltage DC
    24 V
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Product weight
    400 g
  • Cable length
    0.3 m
  • Outputs type
    as per IEC 61131-2 No galvanic isolation
  • Debounce time at inputs
    20 ms
  • Input current consumption
    4 mA
  • Ambient temperature
    0 °C ... 50 °C
  • Degree of protection
    IP65 as per IEC 60529
  • Electrical connection, proportional valve
    7-pin
  • Data backup
    Flash memory
  • Control elements
    3 pushbuttons Touch sensitive keyboard
  • Max. current consumption without proportional valve
    70 mA
  • Current rating per output
    100 mA
  • Vibration resistance to DIN/IEC 68 Part 2-6
    Tested as per severity level 1
  • Elec. connection of operating voltage, inputs and outputs
    15-pin Plug

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents 192217 Specs

192217 192217 DataSheet.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

ESV752N04TXB on Powermatic Associates

ESV752N04TXB

Verified stock: 9

Lenze ESV752N04TXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H250mm x W130mm x D160mm. It includes 1 digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP and 4 additional digital inputs at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size H1, it supports a supply voltage of 400Vac / 480Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 16.1A (400Vac) and 14A (480Vac), and is suitable for a 3-phase (3P / 3AC) network. The rated active power is 7.5kW (400-480Vac), and the rated power is 10HP (400-480Vac).

Lenze

ESV371N01SXB on Powermatic Associates

ESV371N01SXB

Verified stock: 6

Lenze ESV371N01SXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40 °C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H190mm x W99mm x D111mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G1, it supports a supply voltage of 120Vac / 240Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 2.4A for both 120Vac and 240Vac, operates on a single-phase / 1P network, and offers a rated active power of 0.37kW and rated power of 1/2HP for the same voltage range.

Lenze

What can I help you find today?

Recommended parts