1574685 Festo Servo Motors

Product Details

• Insulation protection class
  F
• Motor nominal current
  9.96 A
• Voltage constant, phase-to-phase
  104.41 mVmin
• Storage temperature
  -20 °C ... 60 °C
• Ambient temperature
  -10 °C ... 40 °C
• Stall torque
  25.5 Nm
• Permissible radial shaft load
  1060 N
• Rotor position sensor interface
  EnDat® 22
• Brake DC operating voltage
  24 V
• DC nominal voltage
  565 V
• Peak current
  51.5 A
• Degree of protection
  IP54
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Nominal torque
  17.41 Nm
• MTTFd, subcomponent
  152 years, rotor position sensor
• Note on materials
  RoHS-compliant
• Type code
  EMMS-AS
• Max. rotational speed
  3830 1/min
• Nominal rotary speed
  2800 1/min
• Motor nominal power
  5110 W
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Total output inertia moment
20.108 kgcm²
Peak torque
67.5 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Featherkey shaft design
DIN 6885 A 8 x 7 x 40
Temperature monitoring
PTC resistor
Motor constants
1.75 Nm/A
Rotor position sensor resolution
19 bit
Rating class according to EN 60034-1
S1
Brake holding torque
18 Nm
Permissible axial shaft load
200 N
Product weight
17000 g
Conforms to standard
IEC 60034
Number of pole pairs
6
Rotor position sensor
Absolute encoder, multi-turn
Rotor position sensor measuring principle
Inductive
Brake power consumption
15.6 W
Winding inductance phase-phase
4.65 mH
Phase-phase winding resistance
0.586 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Brake mass moment of inertia
1.2 kgcm²
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Electrical connection technology
Plug

1574685 Related Documents