1574609 Festo Servo Motors

Product Details

• Number of pole pairs
  6
• Nominal rotary speed
  2600 1/min
• Brake power consumption
  15.6 W
• Winding inductance phase-phase
  20.5 mH
• Rating class according to EN 60034-1
  S1
• Total output inertia moment
  9 kgcm²
• Nominal torque
  9.55 Nm
• MTTF, subcomponent
  114 years, rotor position sensor 4469 years, holding brake
• Note on materials
  RoHS-compliant
• Type code
  EMMS-AS
• Rotor position sensor measuring principle
  Inductive
• Motor nominal power
  2600 W
• Peak current
  15 A
• Relative air humidity
  0 - 90 %
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Permissible axial shaft load
  200 N
• Product weight
  10640 g
• Insulation protection class
  F
• DC nominal voltage
  565 V
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
Brake holding torque
18 Nm
Stall torque
11.2 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Electrical connection technology
Plug
Rotor position sensor
Resolver
Max. rotational speed
3060 1/min
Motor constants
2.166 Nm/A
Type of winding switch
Star inside
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Degree of protection
IP54
Ambient temperature
-40 °C ... 40 °C
Permissible radial shaft load
780 N
Conforms to standard
IEC 60034
Rotor position sensor interface
SIN/COS analog signals
Temperature monitoring
PTC resistor
Brake DC operating voltage
24 V
Motor nominal current
4.4 A
Phase-phase winding resistance
3.39 Ohm
Voltage constant, phase-to-phase
130.69 mVmin
Storage temperature
-20 °C ... 60 °C
Brake mass moment of inertia
1 kgcm²
Peak torque
25.6 Nm
MTTFd, subcomponent
228 years, rotor position sensor

1574609 Related Documents