1574624 Festo Servo Motors

Product Details

• Type code
  EMMS-AS
• Rotor position sensor measuring principle
  Inductive
• Brake DC operating voltage
  24 V
• Motor nominal power
  2600 W
• Peak current
  15 A
• Total output inertia moment
  9.271 kgcm²
• Brake holding torque
  18 Nm
• Permissible radial shaft load
  780 N
• Electrical connection technology
  Plug
• Nominal rotary speed
  2600 1/min
• Motor constants
  2.166 Nm/A
• Phase-phase winding resistance
  3.39 Ohm
• Voltage constant, phase-to-phase
  130.69 mVmin
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Degree of protection
  IP65
• Stall torque
  11.2 Nm
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Conforms to standard
  IEC 60034
• Rotor position sensor interface
  EnDat® 22
• Motor nominal current
  4.4 A
Winding inductance phase-phase
20.5 mH
Type of winding switch
Star inside
Nominal torque
9.55 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Featherkey shaft design
DIN 6885 A 8 x 7 x 40
Number of pole pairs
6
Max. rotational speed
3060 1/min
Insulation protection class
F
Rotor position sensor resolution
18 bit
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Ambient temperature
-10 °C ... 40 °C
Peak torque
25.6 Nm
MTTFd, subcomponent
152 years, rotor position sensor
Note on materials
RoHS-compliant
Rotor position sensor
Absolute encoder, single-turn
Temperature monitoring
PTC resistor
Brake power consumption
15.6 W
DC nominal voltage
565 V
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake mass moment of inertia
1.2 kgcm²
Permissible axial shaft load
200 N
Product weight
10400 g

1574624 Related Documents