153520 Festo Pressure Control Valves

Name: 153520
Brand: Festo

Part#:153520

Manufacturer:Festo

Category:Pressure Control Valves

Alt. Part#:LRL-3/8-QS-12

Product Lifecycle:Active

Get a quick Quote!

differential pressure regulator LRL-3/8-QS-12 Without manometer, with male thread and QS plug connector. Controller function: (* Differential pressure, constant, * with return flow), Pneumatic connection, port 1: G3/8, Pneumatic connection, port 2: QS-1

About the manufacturer: Festo is one of the manufacturers that offers Pressure Control Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 153520 Festo price in the box on the right side or send a quick quote.

Product Details

Pneumatic connection 2
QS-12
Pressure regulation range
2 bar ... 6 bar
Pneumatic connection 1
G3/8
Nominal flow rate, open
438 l/min
Ambient temperature
0 °C ... 60 °C
Actuator lock
Counter-locking
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Material of threaded seal
PTFE
Type code
LRL
Type of mounting
Screw-in
Design
Directly controlled piston regulator with continuous compressed air supply
Controller function
Differential pressure constant With return flow function
Inlet pressure 1
0 bar ... 9 bar
Symbol
00991535
Housing material
PBT-reinforced
Mounting position
Any
Product weight
78 g
Note on materials
RoHS-compliant
Operating medium
Compressed air as per ISO 8573-1:2010 [7:-:-]
Material of screwed trunnion
Brass Nickel-plated

Nominal flow rate, closed

379 l/min

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

QOB210

Square D by Schneider Electric QOB210 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 10A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 14-8AWG for 1 cable Al/Cu. It is a 2 Pole device with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are of the press plate type.

Schneider Electric

PKGTAB

Schneider Electric PKGTAB, Load center accessory, QO/Homeline, insulator kit, for ground bars

Schneider Electric

EL1809

Beckhoff HD Ethercat Terminal, 16 Chnnl

Beckhoff

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

RSM-2RKM 40

RSM-2RKM 40 Turck - RSM-2RKM 40 Actuator and Sensor Tee, T-Splitter without Cable

Turck

333