1476526 Festo Electric Actuators

Product Details

• Size
  16
• Step angle tolerance
  ±5%
• Screw diameter
  8 mm
• Stroke
  150 mm
• Step angle with full step
  1.8 deg
• Type code
  EPCO
• Spindle type
  Ball screw drive
• Design
  Electric actuator with ball screw drive
• Insulation protection class
  B
• Motor nominal current
  1.4 A
• Max. angle of rotation of the piston rod +/-
  2 deg
• Piston rod end
  External thread
• Rotor position sensor interface
  RS422 TTL A/B channels + zero index
• Repetition accuracy
  ±0.02 mm
• Max. speed
  0.3 m/s
• Nominal operating voltage DC
  24 V
• Corrosion resistance class (CRC)
  1 - Low corrosion stress
• Ambient temperature
  0 °C ... 50 °C
• Guide value for payload, vertical
  4 kg
• Guide value for payload, horizontal
  8 kg
Type of mounting
With internal thread With accessories
Material of cylinder barrel
Wrought aluminum alloy Smooth anodized
Piston rod thread
M6
Reversing backlash
100 µm
Spindle pitch
8 mm/U
Rotor position sensor
Incremental encoder
Rotor position sensor measuring principle
Optical
CE marking (see declaration of conformity)
As per EU EMC directive
Max. feed force Fx
50 N
Impact energy in the end positions
1.0E-4 J
Mass moment of inertia JO
0.0229 kgcm²
Additional moving mass per 10 mm stroke
2 g
Spindle nut material
Steel
Bending radius, fixed cable installation
≥ 60 mm
Stroke reserve
0 mm
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Duty cycle
100%
Degree of protection
IP40
Max. torque Mz
0.6 Nm
Motor type
Stepper motor
Max. acceleration
10 m/s²
Relative air humidity
0 - 85 % Non-condensing
Certification
RCM compliance mark c UL us - Recognized (OL)
Max. torque My
0.6 Nm
Additional weight per 10 mm stroke
17 g
Basic weight with 0 mm stroke
615 g
Cover material
Wrought aluminum alloy Smooth anodized
Storage temperature
-20 °C ... 60 °C
Max. torque Mx
0 Nm
Mass moment of inertia JH per meter of stroke
0.0265 kgcm²
Moving mass at 0 mm stroke
70 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Housing material
Wrought aluminum alloy Smooth anodized
Mass moment of inertia JL per kg of payload
0.0162 kgcm²
Electrical connection technology
Plug
Spindle material
Roller bearing steel

1476526 Related Documents