1476421 Festo Electric Actuators

Product Details

• Size
  16
• Step angle with full step
  1.8 deg
• Screw diameter
  8 mm
• Type code
  EPCO
• Motor type
  Stepper motor
• Protection against torsion/guide
  With plain-bearing guide
• Max. acceleration
  10 m/s²
• Insulation protection class
  B
• Stroke reserve
  0 mm
• Max. angle of rotation of the piston rod +/-
  2 deg
• Design
  Electric actuator with ball screw drive
• Rotor position sensor measuring principle
  Optical
• Nominal operating voltage DC
  24 V
• Storage temperature
  -20 °C ... 60 °C
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Guide value for payload, horizontal
  24 kg
• Stroke
  200 mm
• Piston rod thread
  M6
• Max. torque Mx
  0 Nm
• Mass moment of inertia JH per meter of stroke
  0.0253 kgcm²
Mass moment of inertia JO
0.0228 kgcm²
Basic weight with 0 mm stroke
615 g
Piston rod material
High-alloy stainless steel
Step angle tolerance
±5%
Piston rod end
External thread
Rotor position sensor
Incremental encoder
Max. speed
0.125 m/s
Degree of protection
IP40
Impact energy in the end positions
1.0E-4 J
Guide value for payload, vertical
12 kg
Additional weight per 10 mm stroke
17 g
Housing material
Wrought aluminum alloy Smooth anodized
Bending radius, fixed cable installation
≥ 60 mm
Reversing backlash
100 µm
Spindle pitch
3 mm/U
Mounting position
Any
Spindle type
Ball screw drive
Rotor position sensor interface
RS422 TTL A/B channels + zero index
Duty cycle
100%
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
1 - Low corrosion stress
CE marking (see declaration of conformity)
As per EU EMC directive
Max. feed force Fx
125 N
Moving mass at 0 mm stroke
70 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Material of cylinder barrel
Wrought aluminum alloy Smooth anodized
Motor nominal current
1.4 A
Relative air humidity
0 - 85 % Non-condensing
Ambient temperature
0 °C ... 50 °C
Max. torque My
0.6 Nm
Max. torque Mz
0.6 Nm
Type of mounting
With internal thread With accessories
Additional moving mass per 10 mm stroke
2 g
Spindle nut material
Steel
Mass moment of inertia JL per kg of payload
0.0023 kgcm²
Electrical connection technology
Plug
Cover material
Wrought aluminum alloy Smooth anodized
Spindle material
Roller bearing steel

1476421 Related Documents