Powermatic Associates Logo

T18VN6URQ Banner Ultrasonic Sensors

T18VN6URQ on Powermatic Associates
Banner

Part#:T18VN6URQ

Manufacturer:Banner

Alt. Part#:38513

Product Lifecycle:Active

Get a quick Quote!

T18U Series: Receiver; Range: 300-600 mm; Input: 12-30 V dc; Output: Complementary NPN; M12 Integral QD

About the manufacturer: Banner is one of the manufacturers that offers Ultrasonic Sensors that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the T18VN6URQ Banner price in the box on the right side or send a quick quote.

Product Details

  • Weight
    63.50288 g
  • Country Of Origin
    MX
  • Profibus
    No
  • 1-wire Serial Interface
    No
  • Wireless
    No
  • SSI
    No
  • RS-485
    No
  • RS-422
    No
  • RS-232
    No
  • PROFINET
    No
  • Common Ethernet Protocol
    No
  • IO Link
    No
  • Application: Ultrasonic
    Yes
  • Feature: Chemical Resistant
    No
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Clear Object Detection
    Yes
  • Supply Protection Circuitry
    Protected against reverse polarity and transient overvoltages
  • Rep Rate (ms)
    Normal Resolution Mode: 8; High Resolution Mode: 5
  • Power/Current Consumption (exclusive of load)
    35 mA
  • Barrel Diameter (mm)
    18
  • Max Operating Temperature (°C)
    70
  • Minimum Response Time (ms)
    1
  • Max Off-state Leakage Current (µA)
    < 1 at 30 V dc
  • Ultrasonic Frequency (kHz)
    230
  • Min Operating Temperature (°C)
    -40
  • NEMA Rating
    NEMA 6P
  • IP Rating
    IP67
  • Output Protection
    Protected against overload and short circuit conditions. No false pulse upon receiver power-up
  • Discrete (Switched) Outputs
    NPN Complementary
  • Output Saturation Voltage PNP Outputs
    < 1.5 V at 10 mA; < 2.0 V at 150 mA
  • Max Discrete (Switched) Output (mA)
    150 mA max. (each output) at 25°C, derated to 100 mA at 70°C (derate ≈ 1 mA per °C)
  • Mechanical Shock
    IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
  • Mechanical Shock (Additional Comments)
    MIL-STD-202G, Meth. 213B, conditions H&I (Shock: 75G with unit operation: 100G for non-operation).
  • Minimum Sensing Distance (mm)
    300
  • Vibration
    MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
  • Output Saturation Voltage NPN Outputs
    < 1.5 V at 10 mA; < 2.0 V at 150 mA
  • Delay at Power-up (ms)
    100
  • Connection
    Integral QD
  • Number of Pins
    4
  • Max Sensing Distance (mm)
    600
  • Power Supply
    12-30 V dc
  • Input/Output
    Discrete
  • Quick Disconnect Type
    M12 (Euro)
  • Indicator
    LED(s)
  • Power
    DC
  • Sensing Mode (General)
    Opposed
  • Housing Style
    Rectangular w/M18 Mount
  • Max Measurement Range
    >500 mm - <=1000 mm
  • Device Type
    Sensor
  • Primary Housing Material
    PBT
  • Sensing Mode (Detailed)
    Receiver
  • PC Configurable
    No
  • Sensing Beam
    Ultrasonic
  • Supply voltage (DC)
    12Vdc-30Vdc (24Vdc nom.)
  • Thread size
    M18
  • Mounting mode
    Threaded mount
  • Ambient air temperature for operation
    -40...+70 °C
  • Sub-range name
    T18U series
  • Main function
    Sensor (Ultrasonic)
  • Primary brand
    Banner Engineering
  • Sensing distance
    300...600mm
  • Operating mode
    Complementary outputs
  • Product series / family name
    U-GAGE series
  • Shape
    Rectangular
  • Material
    thermoplastic housing
  • Functions
    Ultrasonic sensor receiver green LED (power ON) yellow LED (signal)
  • Design
    through-beam system / opposed mode
  • Digital outputs
    1 x digital output (NPN transistor)
  • Protection functions
    Overload Short-circuit
  • Connection type
    Pre-equipped with 4-pin Euro-style M12 connector
  • Degree of protection
    IP67 NEMA 6P
  • Emission frequency
    230kHz
  • Order code / Manufacturer SKU
    38513

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

T18VN6URQ Description

Banner Engineering T18VN6URQ is an ultrasonic sensor designed for through-beam system applications, part of the T18U series. This sensor, functioning as a receiver, features a thermoplastic housing and is equipped with a 4-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc, and can be mounted using an M18 threaded mount. The T18VN6URQ operates within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP67 NEMA 6P, making it suitable for challenging environments. Its rectangular shape incorporates 1 x digital output (NPN transistor; complementary NO/NC) and is capable of sensing distances between 300 and 600mm. The sensor operates at a 230kHz transmission frequency and includes protection functions against overload and short-circuit. Its operating mode features complementary outputs.

Related documents T18VN6URQ Specs

T18VN6URQ 40124.pdf

Manufacturer warranty

$267.00

Request a quote, and we will send availability within minutes.

Select Qty:

$267.00

$267.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

T18SP6R on Powermatic Associates

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

T18SP6RQP on Powermatic Associates

T18SP6RQP

Verified stock: 2

Banner Engineering T18SP6RQP is a photo-electric sensor from the T18 series, designed with a through-beam system or opposed mode. This sensor functions as a receiver alone, housed in a thermoplastic material with a polycarbonate lens. It features a pre-wired connection with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. The sensor operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc / 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6RQP offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor) for signaling. The sensing distance of this sensor is 20m, utilizing infrared (IR) light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes. The thread size for mounting is M18.

Banner

T18SN6R W/30 on Powermatic Associates

T18SN6R W/30

Verified stock: 1

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

Banner

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17