QS18UNAQ8 Banner Ultrasonic Sensors

Name: QS18UNAQ8
Brand: Banner
Price: 160 USD
Availability: BackOrder

Part#:QS18UNAQ8

Manufacturer:Banner

Alt. Part#:73151

Product Lifecycle:Active

Get a quick Quote!

WORLD-BEAM QS18U: Ultrasonic TEACH mode; Range: 50-500 mm; Input: 12-30 V dc; Output: NPN; 4-pin M12 Integral QD

About the manufacturer: Banner is one of the manufacturers that offers Ultrasonic Sensors that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the QS18UNAQ8 Banner price in the box on the right side or send a quick quote.

Product Details

Weight
72.57472 g
Country Of Origin
CN
1-wire Serial Interface
No
Wireless
No
RS-485
No
IO Link
No
Feature: Timing (Hold/Delay)
No
Profibus
No
SSI
No
PROFINET
No
RS-232
No
RS-422
No
Common Ethernet Protocol
No
Application: Ultrasonic
Yes
Feature: Chemical Resistant
No
Feature: Clear Object Detection
Yes
Feature: Remote Teach
Yes
Power/Current Consumption (exclusive of load)
25 mA max
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Max Off-state Leakage Current (µA)
NPN: < 10; PNP: < 5

Ultrasonic Frequency (kHz)

300

Discrete Output Hysteresis (mm)

1.4

Minimum Window Size (mm)

Barrel Diameter (mm)

Rep Rate (ms)

7.5

Minimum Response Time (ms)

Warm-up Time (minutes)

Max Op. Relative Humidity Non-Condensing (%)

100

Min Operating Temperature (°C)

-20

Max Operating Temperature (°C)

NEMA Rating

NEMA 6P

IP Rating

IP67

Discrete (Switched) Outputs

1 NPN

Output Protection

Protected against short circuit conditions

Max Discrete (Switched) Output (mA)

100

Output Saturation Voltage PNP Outputs

< 2.0 V at 100 mA

Mechanical Shock

IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave

Vibration

MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).

Output Saturation Voltage NPN Outputs

< 1.6 V at 100 mA

Number of Pins

Temperature Effect (mm/°C)

+/- 0.05% of sensing distance/°C from -20 °C to +50 °C, +/- 0.1% of sensing distance/°C from +50 °C to +60 °C

Adjustments

Teach Button

Power Supply

12-30 V dc

Delay at Power-up (ms)

300

Max Sensing Distance (mm)

500

Minimum Sensing Distance (mm)

Analog Resolution/Discrete Repeatability

0.7

Input/Output

Discrete

Quick Disconnect Type

M12 (Euro)

Connection

Integral QD

Indicator

LED(s)

Sensing Beam

Ultrasonic

Power

Device Type

Sensor

Sensing Mode (General)

Proximity

Primary Housing Material

ABS

Housing Style

Rectangular w/M18 Mount

Sensing Mode (Detailed)

Time of Flight

PC Configurable

Max Measurement Range

>100 mm - <=500 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

QS18UNAQ8 Description

Banner Engineering QS18UNAQ8 is an ultrasonic distance sensor featuring an M18 threaded mount for secure installation. It operates within an ambient air temperature range of -20 to +60°C and utilizes a time-of-flight system with TEACH mode for precise distance measurement. This sensor is equipped with a 4-pin Euro-style M12 connector for easy connection and falls under the QS18U series. It boasts an IP67 NEMA 6P degree of protection, ensuring durability in various environments. The QS18UNAQ8 requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and is designed in a rectangular shape. It operates at a 300kHz transmission frequency and is constructed with an ABS housing for robustness. The sensing distance ranges from 50 to 500mm, and it features 1 x digital output (NPN transistor) for signal processing. Additionally, it includes protection functions against short-circuits.

$160.00

Request a quote, and we will send availability within minutes.

Select Qty:

$160.00

$160.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

QS18VP6FF100Q8

Verified stock: 8

WORLD-BEAM QS18 Series: Fixed-Field; Range: 100 mm cutoff; Output: Complementary Solid-State PNP; M12 Integral QD

Banner

QS186E

Verified stock: 57

WORLD-BEAM QS18 Series: Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; 2 m (6.5 ft) Cable

Banner

QS18VN6R

Verified stock: 57

WORLD-BEAM QS18 Series: Receiver; Range: 20 m; Input: 10-30 V dc; Output: Complementary Solid-State NPN; 2 m (6.5 ft) Cable

Banner

QS186EQ8

Verified stock: 1

WORLD-BEAM QS18 Series: Emitter; Range: 20 m; Input: 10-30 V dc; Output: Not Applicable; M12 Integral QD

Banner

QS18EP6DQ5

Verified stock: 1

WORLD-BEAM QS18 Expert Series: Diffuse; Range: 800 mm; Input: 10-30 V dc; Output: Complementary Solid-State PNP; 150 mm (6 in) 4-pin M12 Pigtail QD

Banner

What can I help you find today?

Recommended parts

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls