Electronic Components - HMS Networks

Ewon by HMS Networks NB1007-C is a communication gateway designed for both DIN rail or wall mounting, facilitating Ethernet to Netbiter Argos IIoT platform connectivity. It features an LED indicator for operational status and supports SNMP for network management. The gateway offers multiple connection options, including 2 x RJ45 connectors for 10/100Mbit/s Ethernet (1 x WAN and 1 x LAN), 2 x 3-pin connectors for serial connections supporting up to 115.2kbit/s (1 x RS-232 and 1 x RS-485), and 1 x USB micro B connector. Part of the Netbiter EC300 series, it measures H27mm x W135mm x D92mm and has an IP20 degree of protection. The NB1007-C operates on a supply voltage of 9-32Vdc (with 12Vdc / 24Vdc nominal) and is encased in a metal housing. It supports various communication protocols including Ethernet, Modbus, Modbus RTU, Modbus TCP, RS-232, and RS-485. Power consumption is rated at 2.5 W at 24Vdc. It can operate in ambient air temperatures ranging from -40 to +65 °C and can be stored in temperatures from -45 to +85 °C. The device includes 1 x digital output (relay NO contact; 24Vac/1A max. / 24Vdc/1A max.), 4 x analog inputs (2 x 0-10Vdc / 0-20mA / Pt100 16-bit and 2 x 0-10Vdc / 0-20mA), and 2 x digital inputs (dry contact type), with Ethernet speeds of 10/100Mbit/s.

Anybus by HMS Networks AB7001-C is a gateway designed for serial communication, belonging to the Serial Communicators sub-range. This gateway supports configurable RS-232/422/485 protocols for produce/consume and query/response ASCII communications, accommodating up to 31 stations with RS485/422 and offering a baud rate range of 1.2-57.6kbit/s. It is compatible with various Modbus commands and DF1 services, including reading and writing coils, registers, diagnostics, and data integrity checks. The device features reverse voltage protection, short circuit protection, and galvanic isolation on the sub-network, with an MTTF of over 550,000 hours. Designed for industrial environments, it has immunity to electrostatic discharge, electromagnetic RF fields, fast transients, surge protection, and RF conducted interference, with specific emission levels. The AB7001-C has a plastic housing (ABS/PC), measures H120mm x W27mm x D75mm, and includes a 5-pin plug-in connector for DeviceNet, a 9-pin D-sub female connector for serial communication, a 2-poles plug-in connector for power, and an RJ11 PC connector. It supports a supply voltage of 21.6-26.4Vdc (24Vdc nominal), operates within an ambient air temperature range of 0 to +55 °C, and consumes a maximum of 300mA at 24Vdc. The device is designed for DIN rail mounting, offers an IP20 and NEMA 1 degree of protection, and is suitable for use in environments with up to 95% relative humidity, non-condensing.

Ixxat by HMS Networks 1.01.0068.46010 is a repeater designed for converting signals from ISO 11898-2 to fiber optic cable and vice versa. It features a stackable converter/repeater functionality with a Texas Instruments SN65HVD251 CAN transceiver. This part supports a maximum of 120 bus nodes and includes a 120Ω CAN bus termination resistor, which is switchable via a DIP switch. The CAN bus interface complies with ISO 11898-2 standards and utilizes a Sub-D9 connector with integrated, switchable CAN termination resistors. For fiber optic connections, it offers 2 x F-SMA or ST terminals suitable for duplex lines with multi-mode glass of 50/125μm or 62.5/125μm. The repeater introduces a delay of 300ns, equivalent to a 60m bus length, not accounting for the fiber optic signal delay time of 5ns/m. It provides galvanic isolation of 1kV and features a design with 1 x T-bus connector, 1 x ST connector for fiber optics, and 1 x 4-poles plug-in screw connector for power. The device operates with a control voltage of 1.5W (typical), can withstand ambient air temperatures for storage from -20 to +70°C, and operates within a humidity range of 10-95% RH non-condensing. It is housed in a plastic (ABS) enclosure suitable for DIN rail mounting, measuring 100mm in height, 22.5mm in width, and 120mm in depth, and offers protection up to IP30. The repeater is designed to support communication speeds up to 1Mbit/s (CAN).

eWON by HMS Networks SA1621

Ixxat by HMS Networks 1.01.0353.22012 is a gateway featuring an active USB-to-CAN FD interface. It operates with a PC bus interface of USB 2.0 Hi-Speed, capable of 480MBit/s, and is powered by a 32bit microcontroller. This device supports CAN bitrates from 10kbit/s to 1Mbit/s and CAN FD bitrates with an arbitration rate up to 1000kBit/s and a data rate up to 8000kbit/s, including user-defined bit rates. The actual maximum data rate may vary based on operating conditions such as cable length and settings. It also offers a LIN bitrate of up to 20kbit/s. The CAN controller utilized is the IFI CAN_FD IP, and the device ensures galvanic isolation of 800Vdc/500Vac for 1 minute. Power is supplied via USB at 5V/300mA. It includes 2 x RJ45 connectors for CAN/CAN FD, with one being software switchable to a LIN interface, and 2 x USB 2.0 Hi-speed connectors for connectivity. The gateway is equipped with 4 x LED indicators for operational status, housed in a plastic (ABS) enclosure, and operates within an ambient air temperature range for storage of -20 to +70°C. Its dimensions are H80mm x W50mm x D22mm, and it is designed to handle 10-95% relative humidity, non-condensing.

HMS Networks SA1605 is a service part designed for general consultancy services, billed on an hourly charge basis. This part facilitates access to expert advice and support tailored to the specific needs of automation systems, ensuring operational guidance and troubleshooting assistance.

Anybus by HMS Networks AB7661-F is a gateway designed for protocol translation within the X-gateway series. It functions as a CC-Link slave and a PROFINET-IO device, facilitating communication between these two industrial networks. The gateway allows for I/O configuration via a USB port using the Anybus Configuration Manager software and supports installation in both vertical and flat positions. It features galvanic isolation on both the BUS and Ethernet sides to protect against electrical interference. The device is equipped with 2 station address switches, a baud rate switch, and 10 LED indicators for comprehensive status monitoring. It operates on a supply voltage of 19.2-28.8Vdc, with a nominal voltage of 24Vdc, and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, ensuring durability while maintaining a lightweight design. Connection options include a RJ45 LAN connector for 100Mbit/s Ethernet and PROFINET I.O. in full duplex, a 5-pin CC-Link connector, a 2-poles 5.08mm plug-in screw connector for power, and a USB connector for configuration. The AB7661-F offers an IP20 and NEMA 1 degree of protection, is mounted on a DIN rail, and operates within an ambient air temperature range of -25 to +65°C. It consumes a maximum of 400mA current at 24Vdc and typically 200mA. The device is designed to withstand an ambient air temperature range for storage of -40 to +85°C, operates at speeds of 100Mbit/s for PROFINET and 156kbit/s to 10Mbit/s for CC-Link, and can function in environments with 5-95% relative humidity, non-condensing.

eWON by HMS Networks 018860

Ewon by HMS Networks IOX-8AIIS is an I/O unit belonging to the Netbiter series, designed as an I/O extender with a 2400-115200 serial baud rate. It features an LED indicator for operational status and has dimensions of H109mm x W22.6mm x D97.5mm. This unit offers connectivity through 1 x 4-pin connector for logic power and RS-485 communication on the underside, and 1 x 18-way screw connection on the front. It utilizes the Modbus RS-485 communication protocol and requires a supply voltage of 12Vdc-24Vdc. Suitable for DIN rail mounting, the IOX-8AIIS operates within an ambient air temperature range of -10...+50 °C and consumes 58mA of current at 12Vdc or 31mA at 24Vdc. It is equipped with 8 analog inputs supporting 0-20mA / 4-20mA with 12-bits resolution, 100ppm/°C drift, 1kVrms isolation between field and logic, and 350Vpeak isolation between each input. The unit is designed to be stored in conditions ranging from -40...+85 °C and can operate in 5-95% relative humidity (RH; non-condensing).

Ixxat by HMS Networks 1.01.0210.20010 is a CAN/CAN FD repeater designed to facilitate communication within automation systems. It features a Microchip MCP2562FD CAN/CAN FD transceiver and supports both ISO CAN FD and non-ISO CAN FD protocols. The repeater is capable of arbitration rates up to 1000kBit/s and data rates up to 8000kbit/s, with the ability to configure user-defined bit rates. The device exhibits a typical delay of 175ns, equivalent to a 35m bus length, and offers galvanic isolation of 3kVdc/s or 1500Vac/min between CAN 1/CAN 2 and the power supply. It operates on a supply voltage of 9-36Vdc, with nominal values of 12Vdc and 24Vdc, and includes a 120Ω CAN bus termination resistor. The CAN bus interface complies with ISO 11898-2 standards and includes a CAN choke, with connection facilitated through two screw terminals, available with or without integrated CAN termination. The unit is equipped with 8 LED indicators for power, transmit, and defective segment monitoring, and supports a wide operating temperature range of -20 to +70°C. It is designed for DIN rail mounting within a plastic housing, measuring 105mm in height, 22.5mm in width, and 114mm in depth, and is protected against ingress to IP20 standards.