Electronic Components - HMS Networks

Ewon by HMS Networks Flexy20200_00MA is a gateway belonging to the Flexy 200 series, designed for industrial remote data collection and routing. It features routing capabilities between LAN and WAN, Ethernet interface, and Ethernet to serial gateway, supporting a wide range of protocols including MODBUS TCP/RTU, XIP to UNITELWAY, EtherNet/IP to DF1, and more. The device is capable of data acquisition through protocols such as OPC UA, MODBUS/RTU, and others, storing up to 2500 internal tags. It supports data publishing via OPC UA, Modbus, MQTT, among others, and offers alarm notifications through email, SMS, or SNMP traps with four threshold levels. The Flexy20200_00MA includes an internal database for real-time and historical data logging, with an SD card reader for commissioning and extended user memory. Its router functions include IP filtering, NAT, and VPN tunnelling with SSL/TLS encryption for secure communication. Programmable in Basic and Java 2 Standard Edition, it also features synchronization through an embedded real-time clock, file management via FTP, and an embedded web interface for configuration. The design includes an LED indicator, dimensions of H80mm x W134mm x D89mm, and connections via RJ45 and 9-pin D-sub male connectors, with two SD card connectors. It supports a variety of communication protocols, operates on a supply voltage of 9.6-28.8Vdc, and is designed for DIN rail mounting. The operating temperature range is -25 to +60 °C, with storage temperatures from -30 to +70 °C, and it can handle 10-95% relative humidity (non-condensing).

Anybus by HMS Networks HMS-EN2PB-R is a gateway designed as part of the Linking Device Series, serving as a protocol translator gateway with a vertical installation position. It features galvanic isolation on both BUS/Ethernet sides and supports a PROFIBUS address range of node address 0-125. The EtherNet/IP address is flexible, allowing for any valid IP address, with TCP/IP settings configurable via BOOTP-DHCP server or Anybus IP config. This device includes 1 x SD card slot for EtherNet/IP to PROFIBUS translation, 8 x LED indicators for status and diagnostics, and is housed in a plastic enclosure made of ABS/PC. Its dimensions are H110mm x W35mm x D101mm. Connection options include 2 x RJ45 connectors for 10/100Mbit/s Ethernet IP (supporting both full and half duplex), 1 x 9-pin D-sub female connector for PROFIBUS, 1 x 3-poles plug-in screw connector for power, and 1 x USB connector for configuration. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nominal) and can be mounted on a DIN rail or wall. The operating ambient air temperature range is -25 to +60°C, with a storage temperature range of -40 to +85°C. It offers an IP20 and NEMA 1 degree of protection, consumes 300mA (max) or 220mA (typical) at 24Vdc, and supports communication speeds of 10/100Mbit/s for Ethernet and 9.6kbit/s to 12Mbit/s for PROFIBUS. The device is designed to operate in environments with 5-95% relative humidity (non-condensing).

Ixxat by HMS Networks 1.01.0210.20210 is a CAN/CAN FD repeater designed to facilitate communication within automation systems. It features two duo LEDs for transmitting and indicating defective segments, alongside a power LED. The device utilizes a Microchip MCP2562FD CAN/CAN FD transceiver and includes a 120Ω CAN bus termination resistor, with variants available that integrate this resistor directly. The CAN bus interface complies with ISO 11898-2 standards and includes a CAN choke, offering connections via two screw terminals, with options for integrated CAN termination. It supports both ISO CAN FD and non-ISO CAN FD protocols, with arbitration rates up to 1000kBit/s and data rates up to 8000kbit/s, though actual rates may vary based on operating conditions. The repeater has a typical delay of 175ns, equivalent to a 35m bus length, and features 3kVdc/s or 1500Vac/min galvanic isolation between CAN 1/CAN 2 and the power supply. It operates on a 9-36Vdc supply, with nominal 12Vdc/24Vdc, and includes 2 x 4-poles plug-in screw connectors for CAN and 1 x 4-poles plug-in screw connector for power. The device is equipped with 8 x LED indicators for comprehensive status monitoring, is designed for DIN rail mounting in a plastic housing, and measures H105mm x W22.5mm x D114mm. It operates efficiently within an ambient air temperature range for storage of -20 to +70°C and a control voltage up to 1Mbit/s for CAN bit rate and 500kbit/s to 4Mbit/s for CAN FD bit rate, within a humidity range of 10-95% RH, non-condensing.

eWON by HMS Networks NB4002

Anybus by HMS Networks AB7656-F is a gateway designed for protocol translation within the X-gateway series. It functions as an Interbus CU slave and a PROFINET-IO device, facilitating communication between different industrial networks. This gateway is equipped with 10 LED indicators for monitoring fieldbus, sub-network, and device status, and features a baud rate jumper for speed adjustments. It supports a supply voltage range of 19.2-28.8Vdc, with a nominal voltage of 24Vdc. The AB7656-F has dimensions of H127mm x W44mm x D114mm and is constructed from aluminium and plastic, ensuring durability while maintaining a lightweight design. Connection options include a 1 x RJ45 LAN connector for 100Mbit/s Ethernet and PROFINET I.O. operations, 1 x 9-pin D-sub male connector and 1 x 9-pin D-sub female connector for Interbus connectivity, 1 x 2-poles 5.08mm plug-in screw connector for power, and 1 x USB connector for I/O configuration via Anybus Configuration Manager software. It offers an IP20 and NEMA 1 degree of protection, is suitable for DIN rail mounting, and operates within an ambient air temperature range of -25 to +65 °C. The device consumes a maximum of 400mA current at 24Vdc and typically 200mA. It is designed to operate in environments with 5-95% relative humidity (non-condensing) and can store in temperatures ranging from -40 to +85 °C. The communication speed is 100Mbit/s for PROFINET and ranges from 500kbit/s to 2Mbit/s for INTERBUS.