Electrical Safety Devices - Pilz

Pilz PILZ-772002 is a configurable safety base unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This expandable safety controller features a net height of 100 mm, a width of 45 mm, and a depth of 120 mm. It supports a supply voltage range of 20.4-28.8Vdc, with a nominal 24Vdc, and has a power consumption of 35W from an external power supply for the system supply at no load, and 8W for the semiconductor output supply, reaching up to 192W. The unit is equipped with plug-in/detachable screw or spring-loaded terminal connections, accommodating a wire cross-section of 0.25 to 2.5mm2 for screw connections and 0.2 to 2.5mm2 for spring connections. It offers 12 safety inputs and 8 configurable inputs, both supporting 24Vdc, alongside 4 digital outputs for safety semiconductor outputs, 8 for configurable auxiliary outputs, and 4 for test pulse outputs, all designed with short-circuit proof and potential isolation. The device's response time varies from 0.5s to 3s depending on the function, with a rated impulse voltage of 2.5 kV and a rated insulation voltage of 30 V. The PILZ-772002's design includes a PC housing, ensuring compatibility with a maximum cable length of 1000m per input and a total of 2000m for the test pulse output, and it is protected to IP20 standards.

Pilz PILZ-772000 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. The unit has a net height of 100 mm and is expandable in design. It supports a rated current of 0.5mA for residual current at "0" signal, 0.1A for signal level at "1" with Ub-2Vdc for configurable auxiliary output, and 2A for signal level at "1" with Ub-0.5Vdc. Connection types include plug-in/detachable screw or spring-loaded terminals and an RJ45 female connector for 2 base unit safe connections, accommodating a cross-section range of 0.25 to 2.5mm2 for screw connections and 0.2 to 2.5mm2 for spring connections. The device's power consumption varies from 35W at no load to 192W, depending on the output of the external power supply and system supply. It features a net width of 45 mm, a net depth of 120 mm, and offers protection functions such as short-circuit proofing and potential isolation. The PILZ-772000 operates with a supply voltage of 20.4-28.8Vdc, housed in a PC material with an IP20 degree of protection. It supports a maximum cable length of 1000m per input and 2000m overall for test pulse output, with digital outputs including 4 safety semiconductor outputs, 8 configurable auxiliary outputs, and 4 test pulse outputs. The controller has 12 safety inputs and 8 configurable inputs, featuring response times ranging from 3s for simultaneity channel 1 and 2 to 0.5s for the 2-hand circuit, and various time delays for operational precision.

Pilz PILZ-773126 is a configurable safety base unit designed for DIN rail mounting, compatible with a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features potential isolation with protective separation, having a rated surge voltage of 2500V between the safety controller output and system voltage, and 6000V between relay output and system voltage. It supports a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes and a residual current of 0.5mA at a "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The unit's dimensions are 94mm in height, 135mm in width, and 121mm in depth, offering an IP20 degree of protection. It requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) and is constructed from PPO and ABS materials. The PILZ-773126 supports Ethernet communication, handles a maximum cable length of 1000m per input and 40km overall for test pulse output, and allows for a cross-section range of 0.25 to 2.5mm2 for flexible wiring. Power consumption is rated at 192W with an external power supply under load and 8W with no load. It features 20 safety inputs, 4 safety semiconductor outputs, 2 safety relay outputs, and additional outputs for standard auxiliary and test pulse functions, all designed to ensure short-circuit proof operation and potential isolation. The device's response time varies for different functions, with a maximum cycle time of 15ms and specific delays for switch-off, switch-on, and input processing.

Pilz PILZ-773110 is a configurable safety base unit designed for DIN rail mounting, featuring a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection. The unit has a net height of 94mm and is expandable for mechanical press functions. It supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), 3A at 24Vdc (DC-13) and 230Vac (AC-15), and a signal level of 2A at "1" with a residual current of 0.5mA at "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The base unit has dimensions of W27mm x L1000mm (max cable length per input) x H135mm x D121mm, with an IP20 degree of protection and a supply voltage range of 20.4-28.8Vdc. It is constructed from PPO bottom housing and ABS front housing, supports Ethernet communication protocol, and allows for a maximum overall cable length of 40km for test pulse output. The power consumption is 192W with an external power supply under load, 9W with no load, and 2.5W per expansion module. It features 20 safety inputs and 9 digital outputs, including 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proof, potential isolation, and galvanic isolation protection functions. The response time varies from 0.5s to 3s depending on the function, with a rated impulse voltage of 6kV and a rated insulation voltage of 250V. Current consumption is rated at 6A with specific time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a maximum cycle time of 15ms for device processing.

Pilz PILZ-784139 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous and delayed E-STOP monitoring, pressure sensitive mat monitoring, and features an ON-delay de-energization timer. It supports monitored manual reset and start-up testing, incorporating both AND and OR logic inputs for flexible integration into safety systems. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. It has a net height of 101 mm, a rated current of 1.5A, and utilizes plug-in/detachable spring terminal connections. The PILZ-784139, part of the PNOZ e4vp sub-range, measures 22.5mm in width and 121mm in depth, with a degree of protection rated at IP40. It operates on a supply voltage of 19.2-30Vdc (24Vdc nominal) and is constructed with a PPO housing and an ABS front housing. The relay offers automatic and manual restart options, with the ability to connect contact expansion modules or external contactors/relays for increased contact availability. It features 1 x instantaneous auxiliary output, 1 x instantaneous safety output, 1 x delayed safety output with selectable time delay, and 2 x test pulse outputs. The PILZ-784139 includes protection functions for operating modes with or without detection of shorts across contacts and is equipped with 1 x digital input, 2 x logic inputs, 1 x feedback input, 1 x start input, and 1 x self-monitoring input.

Pilz PILZ-774198 is a mounting accessory designed as a line inspection device with functions including monitoring for potential wiring errors and protection. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -30 to +70°C. This accessory has a net height of 36 mm, a width of 26 mm, and a depth of 12.1 mm, ensuring a compact design. It features screw terminal connections for secure wiring and boasts an IP40 degree of protection. The PILZ-774198 is designed to work with a supply voltage of 24Vdc and can accommodate cable lengths up to 3000m, making it versatile for various installation requirements.

Pilz PILZ-774180 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, pressure sensitive mat monitoring, ON-delay de-energization timer, delayed E-STOP monitoring, and monitored manual reset. It features start-up testing with AND and OR inputs, self-test functionality, and is suitable for DIN rail mounting. The operating ambient air temperature range is -10 to +55°C, with a net height of 94 mm, rated current of 1.5A, and plug-in/detachable screw terminal connections. This part falls under the PNOZ e4vp sub-range, with dimensions of W22.5mm x D121mm, and an IP40 degree of protection. It operates on a supply voltage of 19.2-30Vdc (24Vdc nominal) and is constructed with a PPO housing and ABS front housing. The net width is 22.5 mm. Its operating modes include automatic reset and manual restart, with the capability to increase the number of available contacts by connecting contact expansion modules or external contactors/relays. It offers digital outputs including 1 x instantaneous auxiliary output, 1 x instantaneous safety output, 1 x delayed safety output with a selectable time-delay, and 2 x test pulse outputs. Protection functions include 2 operating modes with or without detection of shorts across contacts, and it has digital inputs for enhanced functionality.

Pilz PILZ-774130 is a safety relay designed for single or dual-channel operation with features including safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 (with or without test pulse) and type 4. It offers an ON-delay de-energization timer, delayed E-STOP monitoring, monitored manual reset, and start-up testing with AND input and OR input. The self-test function ensures operational integrity. This part is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55 °C. It has a net height of 94 mm, a rated current of 2A, and utilizes plug-in/detachable screw terminal connections. The PNOZ e1vp sub-range part measures 22.5mm in width and 121mm in depth, with a degree of protection rated at IP40. It requires a supply voltage of 19.2-30Vdc (24Vdc nominal) and is constructed with a PPO housing and an ABS front housing. The relay features 1 x instantaneous auxiliary output, 1 x instantaneous safety output, and 1 x delayed safety output with a selectable time delay up to 300 seconds, alongside 2 x test pulse outputs. It includes protection functions for two operating modes, digital inputs for enhanced connectivity, and the ability to increase the number of available contacts through external modules.

Pilz PILZ-787609 is a safety relay designed for single or dual-channel operation with functions including safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 and type 4 devices. It offers a monitored manual reset and is suitable for DIN rail mounting. The operating ambient air temperature range is -10 to +55 °C, with a net height of 101 mm. This part has safety output contact ratings of 8A at 24Vdc (DC-1), 8A at 240Vac (AC-1), 7A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). It features plug-in/detachable spring terminal connections and belongs to the PNOZ X10.11P sub-range. The dimensions include a width of 90 mm and a depth of 121 mm, with a degree of protection rated at IP40. The supply voltage is 20.4-26.4Vdc (24Vdc nominal), and the housing is made of PPO with an ABS front. Power consumption is rated at 5.5 W. The operating modes include options for single-channel operation without redundancy, dual-channel operation with and without detection of shorts across contacts, automatic start, manual start, and monitored start. It has 6 x instantaneous safety outputs and 4 x instantaneous auxiliary outputs, with 2 operating modes for protection functions. Digital inputs include 2 x digital inputs, 1 x feedback input, and 1 x start input.

Pilz PILZ-787601 is a safety relay designed for single or dual-channel operation with features including safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 (with or without test pulse) and type 4 devices. It supports monitored manual reset and is suitable for DIN rail mounting. The operating ambient air temperature range is -10 to +55 °C. This model has a net height of 101 mm, a rated current for safety output contacts of 8A at 24Vdc (DC-1), 8A at 240Vac (AC-1), 7A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. The supply voltage ranges from 20.4-264Vac (24Vac / 120Vac / 240Vac nom.) and 20.4-264Vdc (24Vdc / 110Vdc / 120Vdc / 220Vdc / 250Vdc nom.) for AC and DC respectively. It belongs to the PNOZ X9P sub-range, with dimensions of W90mm x D121mm, and offers a degree of protection of IP40. The housing is made of PPO with an ABS front, and the net width is 90 mm. Power consumption is rated at 5.5 W. Operating modes include single-channel operation without redundancy, dual-channel operation with and without detection of shorts across contacts, automatic start, manual start, and monitored start. It can increase the number of available contacts by connecting to contact expansion modules or external contactors/relays. It features 7 x instantaneous safety outputs, 2 x instantaneous auxiliary outputs, 2 x auxiliary semiconductor outputs, 2 operating modes for protection functions, 2 x digital inputs, 1 x feedback input, and 1 x start input.