All categories
AC/DC Power Supplies
AC/DC power supplies are power supplies that convert alternating current from the grid into direct current that is needed to power most electronics. AC/DC power supplies are integral components in systems that make the world go round.
PULS XT40.242 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x432-528Vac (with nominal values of 440Vac, 480Vac, 500Vac, 525Vac; frequency 47-63Hz), a turn-on voltage of 3 x 390Vac, and a shutdown voltage of 3 x 355Vac. The unit is housed in aluminium, measures W96mm x H124mm x D159mm, and features screw-clamp connections for installation. It is rated for a current of 40A at 24Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.242 has a peak inrush current consumption of 4A (at 3x480Vac input), a rated power of 960W at 24Vdc (1200W for typ. 15s), and includes protection functions such as output overvoltage protection (29.9Vdc max.) and overload/short-circuit current protection. It is not suitable for parallel operation to increase output power but supports 1+1 redundancy for higher system availability. The unit's efficiency is rated at 0.955 (at 3x480Vac input), with a 350ms start-up delay, and output voltage fixed at 24Vdc. The hold time is 2ms (at 3x480Vdc input), and power dissipation/losses are 45.2W (at full output load). Its electrical durability is rated at 51000 hours (at 40°C; 40A output; 3AC 480Vdc input) and 142000 hours (at 25°C; 40A output; 3AC 480Vdc input), with an output stage capacitance of 20000µF and a ripple of 1500mVpp.
Quick Quote
PULS FPT500.241-002-101 is a power supply unit from the FPT500 Basic 3AC series designed for field AC/DC power supply or conversion. It features a DC-OK relay contact output within an aluminium housing and utilizes a HanQ4/2 female connector for input, a 5-pin M12 connector for DC-OK, and a HanQ4/0 connector for output. This unit offers protection against output overvoltage, overload, short-circuit, and over-temperature, with specific mechanisms for handling heavy overloads and automatic restarts under certain conditions. It does not support series or parallel operation and is designed to resist back-feeding loads up to 35V / 4J. The rated current is 20.8A at 24Vdc, with a supply voltage range of 323Vac-552Vac across various nominal voltages and frequencies. It is designed for hanging or screw mounting, operates within an ambient air temperature range of -25 to +70°C, and offers IP65 and IP67 protection. The unit operates on a 3-phase network, with specific current consumption and efficiency ratings based on input voltage. It provides a rated power of 600W to 350W depending on the operating temperature, with short-term power availability up to 1000W. The output voltage is adjustable between 24Vdc and 28Vdc, with a specified electrical durability and power dissipation/losses under different conditions.
Quick Quote
PULS ML100.200 is a power supply unit designed for AC/DC conversion with DIN rail mounting capabilities. It operates within an ambient air temperature range of -10 to +70°C and offers a rated current of 4.2A at 24Vdc, with a derating of 2.5W from +60°C to +70°C. The unit features spring-clamp connections for secure installation and supports a wide supply voltage range of 323Vac to 576Vac, accommodating various nominal voltages such as 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac across a frequency range of 47-63Hz, suitable for 2-phase input networks. With dimensions of W72.5mm x H75mm x D103mm and constructed from a PC/ABS blend housing, the ML100.200 has a net width of 72.5 mm. It delivers a rated power of 100W and an adjustable output voltage range of 24Vdc to 28Vdc. The unit is equipped with an NTC for input inrush current limitation, achieving efficiencies of 0.895 and 0.89 at 400Vac and 480Vac inputs, respectively. It has a maximum inrush current consumption of 36A at 2x400Vac input and 45A peak at 2x480Vac input, with power dissipation/losses of 11.7W and a ripple of 50mVpp across a frequency range of 20Hz to 20MHz at 50Ω.
Quick Quote
PULS QS5.DNET is a power supply unit designed for AC/DC conversion with DIN rail mounting. It operates within an ambient air temperature range of -25 to +70°C and is a NEC Class 2 DeviceNet approved unit featuring a DC-OK relay contact output. The unit provides a rated current of 3.8A at 24Vdc and utilizes spring-clamp connections for connectivity. It supports a wide supply voltage range from 85Vac to 264Vac across various nominal values and from 88Vdc to 360Vdc, with specific turn-on and shutdown voltages detailed for both AC and DC inputs. The QS5.DNET, part of the Q-series, measures 40mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, offering a rated power of 91.2W and a fixed output voltage of 24Vdc. Protection features include output overvoltage protection and mechanisms for handling overload, short-circuit conditions, and back-feeding loads. The unit boasts high efficiency rates varying with input voltage, specific current consumption peaks, and detailed time delays for start-up and rise times, alongside hold times for buffer periods. Power dissipation losses are provided for different input conditions, and the electrical durability is specified under various operational conditions. The output stage capacitance is 3500µF, and the ripple is maintained at 50mVpp across a wide frequency range.
Quick Quote
PULS XT40.241 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x360-440Vac (380Vac / 400Vac / 415Vac nominal; 47-63Hz), with a turn-ON voltage of 3 x 325Vac and a shutdown voltage of 3 x 295Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is encased in an aluminium housing with screw-clamp connections for installation. It has a rated current of 40A at 24Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.241 has a net width of 96 mm and a peak current consumption of 4A max. inrush at 3x400Vac input. Its rated power is 24W/+60°C...+70°C (derating) 960W at 24Vdc and 1200W for a typical 15s. Protection functions include output overvoltage protection (29.9Vdc max.), active input inrush current limiter, and overload/short-circuit current protection. It supports 1+1 redundancy for higher system availability and is resistant to back-feeding loads up to 28.9V. The efficiency is rated at 0.955 with a 3x400Vac input, and it features a 400ms start-up delay, 40ms rise time with nominal input at constant full current load without load capacitance, and 70ms with 40mF load capacitance. The output voltage is fixed at 24Vdc with a 480mV turn-ON overshoot, and it has a 2ms buffer time at 3x400Vdc input. Power dissipation/losses are 45.2 W at full output load with 3x400Vdc input. Electrical durability is rated at 51000 hours at 40°C and 142000 hours at 25°C, with a 40A output and 3AC 400Vdc input. The output stage capacitance is 20000 µF, and the ripple is 1500mVpp (20Hz...2KHz; 50Ω).
Quick Quote
PULS CP20.241-R1 is a DIN rail mounting power supply unit housed in an aluminium casing, designed to operate within an ambient air temperature range of -40 to +70°C. It features a net width of 48 mm and offers a degree of protection rated at IP20. This unit consumes current at rates of 2.25A with a 230Vac input, 4.28A with a 120Vac input, 5.17A with a 100Vac input, and 4.64A with a 110Vdc input for a 24Vdc / 10A output, with peak inrush currents of 5.5A at 230Vac input and 12A at 120Vac input. It boasts an efficiency of 0.952 at 230Vac input and 0.938 at 120Vac input. The dimensions of this power supply are W48mm x H124mm x D127mm. It has a 450ms start-up delay for 100-230Vac input, with rise times of 145ms and 160ms under specified conditions. The CP20.241-R1 includes protection functions such as output overvoltage protection and overload/short-circuit protection, with capabilities for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation losses are 24.2 W and 31.7 W for 230Vac and 120Vac inputs respectively, with an output stage capacitance of 8000 µF. Electrical durability ranges from 25,000 to 465,000 hours under various conditions. The ripple is specified at 100mVpp. This AC/DC power supply unit, part of the CP-series, is designed with built-in decoupling MOSFET for redundancy, ATEX approval, and features a 20% power reserve, DC-OK relay contact output, and spring-clamp connections. It supports a supply voltage range of 88Vdc-180Vdc and 85Vac-264Vac, with specific tolerances for overvoltage and shutdown voltages. The rated current is 24A at 48Vdc in temperatures up to +45°C, with derating at higher temperatures. It is suitable for single-phase (1AC) or DC networks, providing a rated power of 576W at temperatures up to +45°C, and features a fixed 24Vdc output voltage with a 1000mV turn-ON overshoot and a hold time of 32ms.
Quick Quote
PULS CP10.241-R2-C1 is a power supply unit designed for DIN rail mounting with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C. The unit has a net width of 39 mm and features current consumption rates of 1.14A with a 230Vac input, 2.17A with a 120Vac input, 2.63A with a 100Vac input, and 2.35A with a 110Vdc input, all at full output. It offers a peak max. inrush of 11A at 230Vac input and 7A at 120Vac input. With an IP20 degree of protection and an efficiency of 0.947 at 230Vac input, this power supply unit is also chemically resistant with a conformal coated PCB. Its dimensions are W39mm x H124mm x D117mm. The time delay for start-up is 240-300ms for 100-230Vac input, with a rise time of 30ms at nominal input for a full constant current load without load capacitance and 75ms with 2mF load capacitance. It includes protection functions such as output overvoltage protection and overload/short-circuit protection, with capabilities for series or parallel operation for increased output voltages or redundancy. The unit is resistant to back-feeding loads up to 35V. Power dissipation/losses are 13.4 W at 230Vac input and 18.1 W at 120Vac input, with an output stage capacitance of 4400 µF. Electrical durability ranges from 47,000 to 531,000 hours depending on conditions. The ripple is 50mVpp. This AC/DC power supply unit is part of the CP-series and is designed with built-in decoupling MOSFET for 1+1 or N+1 redundancy, hot-swappable connectors, conformal coating, and a 20% power reserve. It features a DC-OK relay contact output and supports a supply voltage range of 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with a rated current of 12A at 48Vdc up to +45°C. The rated power is 288W up to +45°C, and the output voltage is adjustable between 24Vdc and 25.4Vdc. The hold time is 37ms at 120/230Vac input.
Quick Quote
PULS QS40.361 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit is ATEX approved and includes a DC-OK relay contact output. It provides a rated current of 26.7A at 36Vdc and 22.9A at 42Vdc, with screw-clamp connections for installation. The supply voltage ranges from 85Vac to 264Vac across various nominal voltages, with specific turn-ON and shutdown voltages. Part of the Q-series, it measures 125mm in width, 124mm in height, and 127mm in depth, housed in aluminium. Designed for single-phase networks, it offers a rated power of 960W, extendable to 1440W for short-term applications, and an adjustable output voltage between 36Vdc and 42Vdc. Protection features include output overvoltage protection and active input inrush current limiting, with capabilities for overload, short-circuit protection, and series/parallel operation. Efficiency rates vary with input voltage, and it has specific current consumption, time delay, hold time, power dissipation, and electrical durability metrics. The ripple is 130mVpp, and the output stage capacitance is 4700µF.
Quick Quote
PULS XT40.361 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates with a supply voltage of 3x360-440Vac (380Vac / 400Vac / 415Vac nominal; 47-63Hz), a turn-ON voltage of 3 x 325Vac, and a shutdown voltage of 3 x 295Vac. The unit is housed in an aluminium casing, measures W96mm x H124mm x D159mm, and features screw-clamp connections for installation. It is designed for DIN rail mounting in a 3-phase (3AC) network environment. The XT40.361 operates efficiently within an ambient air temperature range of -25 to +70°C, has a net width of 96 mm, and a peak inrush current consumption of 4A (at 3x400Vac input). It offers a rated current of 26.6A (at 36Vdc), with a rated power of 960W (at 36 Vdc) and 1200W for a typical 15s, adjusting to 24W/+60°C...+70°C (derating). Protection features include output overvoltage protection (42.5Vdc max.), active input inrush current limiter, and overload/short-circuit current protection—typically 115A at load impedance. The unit is not designed for series or parallel operation to increase output power but supports 1+1 redundancy for higher system availability. It can handle back-feeding loads up to 41.1V without malfunctioning. The XT40.361 boasts an efficiency of 0.955 (with 3x400Vac input), a 400ms start-up delay, and a rise time of 40ms (nominal input; constant full current load; 0mF load capacitance) to 70ms (nominal input; constant full current load; 27mF load capacitance). The fixed output voltage is 36Vdc with a 700mV turn-ON overshoot, and it offers a hold time of 2.6ms (buffer time at 3x400Vdc input). Power dissipation/losses are calculated at 45.2 W (3x400Vdc input; full output load), and the electrical durability is rated at 55000 hours (at 40°C; 26.6A output; 3AC 400Vdc input) to 156000 hours (at 25°C; 26.6A output; 3AC 400Vdc input). The output stage capacitance is 11100 µF, with a ripple of 2000mVpp (20Hz...2KHz; 50Ω).
Quick Quote
PULS XT40.722 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x432-528Vac (440Vac / 480Vac / 500Vac / 525Vac nominal; 47-63Hz), with a turn-on voltage of 3 x 390Vac and a shutdown voltage of 3 x 355Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is encased in an aluminium housing with screw-clamp connections for installation. It has a rated current of 13.3A at 72Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.722 has a net width of 96 mm and a peak current consumption of 4A max. inrush at 3x480Vac input. Its rated power is 24W/+60°C...+70°C (derating) 960W at 72Vdc and 1200W for a typical 15s, with protection functions including output overvoltage protection (91.1Vdc max.), active input inrush current limiter, and overload/short-circuit current protection. It is not designed for series or parallel operation to increase output power but supports 1+1 redundancy for higher system availability. The unit is resistant to back-feeding loads up to 87.9V. It has an efficiency of 0.955 at 3x480Vac input, with a 350ms start-up delay, 40ms rise time at nominal input and full current load without load capacitance, and 70ms with 13.3mF load capacitance. The output voltage is fixed at 72Vdc with a 1.4V turn-ON overshoot, a hold time of 3.6ms at 3x480Vdc input, power dissipation/losses of 45.2W at full output load, an output stage capacitance of 4050µF, and a ripple of 3000mVpp at 20Hz...2KHz with a 50Ω load.
Quick Quote
| Item | Manufacturer | Price | Stock | Delivery | |
|---|---|---|---|---|---|
| XT40.242 PULS XT40.242 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x432-528Vac (with nominal values of 440Vac, 480Vac, 500Vac, 525Vac; frequency 47-63Hz), a turn-on voltage of 3 x 390Vac, and a shutdown voltage of 3 x 355Vac. The unit is housed in aluminium, measures W96mm x H124mm x D159mm, and features screw-clamp connections for installation. It is rated for a current of 40A at 24Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.242 has a peak inrush current consumption of 4A (at 3x480Vac input), a rated power of 960W at 24Vdc (1200W for typ. 15s), and includes protection functions such as output overvoltage protection (29.9Vdc max.) and overload/short-circuit current protection. It is not suitable for parallel operation to increase output power but supports 1+1 redundancy for higher system availability. The unit's efficiency is rated at 0.955 (at 3x480Vac input), with a 350ms start-up delay, and output voltage fixed at 24Vdc. The hold time is 2ms (at 3x480Vdc input), and power dissipation/losses are 45.2W (at full output load). Its electrical durability is rated at 51000 hours (at 40°C; 40A output; 3AC 480Vdc input) and 142000 hours (at 25°C; 40A output; 3AC 480Vdc input), with an output stage capacitance of 20000µF and a ripple of 1500mVpp. | Puls | Quick Quote | ||
| FPT500.241-002-101 PULS FPT500.241-002-101 is a power supply unit from the FPT500 Basic 3AC series designed for field AC/DC power supply or conversion. It features a DC-OK relay contact output within an aluminium housing and utilizes a HanQ4/2 female connector for input, a 5-pin M12 connector for DC-OK, and a HanQ4/0 connector for output. This unit offers protection against output overvoltage, overload, short-circuit, and over-temperature, with specific mechanisms for handling heavy overloads and automatic restarts under certain conditions. It does not support series or parallel operation and is designed to resist back-feeding loads up to 35V / 4J. The rated current is 20.8A at 24Vdc, with a supply voltage range of 323Vac-552Vac across various nominal voltages and frequencies. It is designed for hanging or screw mounting, operates within an ambient air temperature range of -25 to +70°C, and offers IP65 and IP67 protection. The unit operates on a 3-phase network, with specific current consumption and efficiency ratings based on input voltage. It provides a rated power of 600W to 350W depending on the operating temperature, with short-term power availability up to 1000W. The output voltage is adjustable between 24Vdc and 28Vdc, with a specified electrical durability and power dissipation/losses under different conditions. | Puls | Quick Quote | ||
| ML100.200 PULS ML100.200 is a power supply unit designed for AC/DC conversion with DIN rail mounting capabilities. It operates within an ambient air temperature range of -10 to +70°C and offers a rated current of 4.2A at 24Vdc, with a derating of 2.5W from +60°C to +70°C. The unit features spring-clamp connections for secure installation and supports a wide supply voltage range of 323Vac to 576Vac, accommodating various nominal voltages such as 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac across a frequency range of 47-63Hz, suitable for 2-phase input networks. With dimensions of W72.5mm x H75mm x D103mm and constructed from a PC/ABS blend housing, the ML100.200 has a net width of 72.5 mm. It delivers a rated power of 100W and an adjustable output voltage range of 24Vdc to 28Vdc. The unit is equipped with an NTC for input inrush current limitation, achieving efficiencies of 0.895 and 0.89 at 400Vac and 480Vac inputs, respectively. It has a maximum inrush current consumption of 36A at 2x400Vac input and 45A peak at 2x480Vac input, with power dissipation/losses of 11.7W and a ripple of 50mVpp across a frequency range of 20Hz to 20MHz at 50Ω. | Puls | Quick Quote | ||
| QS5.DNET PULS QS5.DNET is a power supply unit designed for AC/DC conversion with DIN rail mounting. It operates within an ambient air temperature range of -25 to +70°C and is a NEC Class 2 DeviceNet approved unit featuring a DC-OK relay contact output. The unit provides a rated current of 3.8A at 24Vdc and utilizes spring-clamp connections for connectivity. It supports a wide supply voltage range from 85Vac to 264Vac across various nominal values and from 88Vdc to 360Vdc, with specific turn-on and shutdown voltages detailed for both AC and DC inputs. The QS5.DNET, part of the Q-series, measures 40mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, offering a rated power of 91.2W and a fixed output voltage of 24Vdc. Protection features include output overvoltage protection and mechanisms for handling overload, short-circuit conditions, and back-feeding loads. The unit boasts high efficiency rates varying with input voltage, specific current consumption peaks, and detailed time delays for start-up and rise times, alongside hold times for buffer periods. Power dissipation losses are provided for different input conditions, and the electrical durability is specified under various operational conditions. The output stage capacitance is 3500µF, and the ripple is maintained at 50mVpp across a wide frequency range. | Puls | Quick Quote | ||
| XT40.241 PULS XT40.241 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x360-440Vac (380Vac / 400Vac / 415Vac nominal; 47-63Hz), with a turn-ON voltage of 3 x 325Vac and a shutdown voltage of 3 x 295Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is encased in an aluminium housing with screw-clamp connections for installation. It has a rated current of 40A at 24Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.241 has a net width of 96 mm and a peak current consumption of 4A max. inrush at 3x400Vac input. Its rated power is 24W/+60°C...+70°C (derating) 960W at 24Vdc and 1200W for a typical 15s. Protection functions include output overvoltage protection (29.9Vdc max.), active input inrush current limiter, and overload/short-circuit current protection. It supports 1+1 redundancy for higher system availability and is resistant to back-feeding loads up to 28.9V. The efficiency is rated at 0.955 with a 3x400Vac input, and it features a 400ms start-up delay, 40ms rise time with nominal input at constant full current load without load capacitance, and 70ms with 40mF load capacitance. The output voltage is fixed at 24Vdc with a 480mV turn-ON overshoot, and it has a 2ms buffer time at 3x400Vdc input. Power dissipation/losses are 45.2 W at full output load with 3x400Vdc input. Electrical durability is rated at 51000 hours at 40°C and 142000 hours at 25°C, with a 40A output and 3AC 400Vdc input. The output stage capacitance is 20000 µF, and the ripple is 1500mVpp (20Hz...2KHz; 50Ω). | Puls | Quick Quote | ||
| CP20.241-R1 PULS CP20.241-R1 is a DIN rail mounting power supply unit housed in an aluminium casing, designed to operate within an ambient air temperature range of -40 to +70°C. It features a net width of 48 mm and offers a degree of protection rated at IP20. This unit consumes current at rates of 2.25A with a 230Vac input, 4.28A with a 120Vac input, 5.17A with a 100Vac input, and 4.64A with a 110Vdc input for a 24Vdc / 10A output, with peak inrush currents of 5.5A at 230Vac input and 12A at 120Vac input. It boasts an efficiency of 0.952 at 230Vac input and 0.938 at 120Vac input. The dimensions of this power supply are W48mm x H124mm x D127mm. It has a 450ms start-up delay for 100-230Vac input, with rise times of 145ms and 160ms under specified conditions. The CP20.241-R1 includes protection functions such as output overvoltage protection and overload/short-circuit protection, with capabilities for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation losses are 24.2 W and 31.7 W for 230Vac and 120Vac inputs respectively, with an output stage capacitance of 8000 µF. Electrical durability ranges from 25,000 to 465,000 hours under various conditions. The ripple is specified at 100mVpp. This AC/DC power supply unit, part of the CP-series, is designed with built-in decoupling MOSFET for redundancy, ATEX approval, and features a 20% power reserve, DC-OK relay contact output, and spring-clamp connections. It supports a supply voltage range of 88Vdc-180Vdc and 85Vac-264Vac, with specific tolerances for overvoltage and shutdown voltages. The rated current is 24A at 48Vdc in temperatures up to +45°C, with derating at higher temperatures. It is suitable for single-phase (1AC) or DC networks, providing a rated power of 576W at temperatures up to +45°C, and features a fixed 24Vdc output voltage with a 1000mV turn-ON overshoot and a hold time of 32ms. | Puls | Quick Quote | ||
| CP10.241-R2-C1 PULS CP10.241-R2-C1 is a power supply unit designed for DIN rail mounting with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C. The unit has a net width of 39 mm and features current consumption rates of 1.14A with a 230Vac input, 2.17A with a 120Vac input, 2.63A with a 100Vac input, and 2.35A with a 110Vdc input, all at full output. It offers a peak max. inrush of 11A at 230Vac input and 7A at 120Vac input. With an IP20 degree of protection and an efficiency of 0.947 at 230Vac input, this power supply unit is also chemically resistant with a conformal coated PCB. Its dimensions are W39mm x H124mm x D117mm. The time delay for start-up is 240-300ms for 100-230Vac input, with a rise time of 30ms at nominal input for a full constant current load without load capacitance and 75ms with 2mF load capacitance. It includes protection functions such as output overvoltage protection and overload/short-circuit protection, with capabilities for series or parallel operation for increased output voltages or redundancy. The unit is resistant to back-feeding loads up to 35V. Power dissipation/losses are 13.4 W at 230Vac input and 18.1 W at 120Vac input, with an output stage capacitance of 4400 µF. Electrical durability ranges from 47,000 to 531,000 hours depending on conditions. The ripple is 50mVpp. This AC/DC power supply unit is part of the CP-series and is designed with built-in decoupling MOSFET for 1+1 or N+1 redundancy, hot-swappable connectors, conformal coating, and a 20% power reserve. It features a DC-OK relay contact output and supports a supply voltage range of 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with a rated current of 12A at 48Vdc up to +45°C. The rated power is 288W up to +45°C, and the output voltage is adjustable between 24Vdc and 25.4Vdc. The hold time is 37ms at 120/230Vac input. | Puls | Quick Quote | ||
| QS40.361 PULS QS40.361 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit is ATEX approved and includes a DC-OK relay contact output. It provides a rated current of 26.7A at 36Vdc and 22.9A at 42Vdc, with screw-clamp connections for installation. The supply voltage ranges from 85Vac to 264Vac across various nominal voltages, with specific turn-ON and shutdown voltages. Part of the Q-series, it measures 125mm in width, 124mm in height, and 127mm in depth, housed in aluminium. Designed for single-phase networks, it offers a rated power of 960W, extendable to 1440W for short-term applications, and an adjustable output voltage between 36Vdc and 42Vdc. Protection features include output overvoltage protection and active input inrush current limiting, with capabilities for overload, short-circuit protection, and series/parallel operation. Efficiency rates vary with input voltage, and it has specific current consumption, time delay, hold time, power dissipation, and electrical durability metrics. The ripple is 130mVpp, and the output stage capacitance is 4700µF. | Puls | Quick Quote | ||
| XT40.361 PULS XT40.361 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates with a supply voltage of 3x360-440Vac (380Vac / 400Vac / 415Vac nominal; 47-63Hz), a turn-ON voltage of 3 x 325Vac, and a shutdown voltage of 3 x 295Vac. The unit is housed in an aluminium casing, measures W96mm x H124mm x D159mm, and features screw-clamp connections for installation. It is designed for DIN rail mounting in a 3-phase (3AC) network environment. The XT40.361 operates efficiently within an ambient air temperature range of -25 to +70°C, has a net width of 96 mm, and a peak inrush current consumption of 4A (at 3x400Vac input). It offers a rated current of 26.6A (at 36Vdc), with a rated power of 960W (at 36 Vdc) and 1200W for a typical 15s, adjusting to 24W/+60°C...+70°C (derating). Protection features include output overvoltage protection (42.5Vdc max.), active input inrush current limiter, and overload/short-circuit current protection—typically 115A at load impedance. The unit is not designed for series or parallel operation to increase output power but supports 1+1 redundancy for higher system availability. It can handle back-feeding loads up to 41.1V without malfunctioning. The XT40.361 boasts an efficiency of 0.955 (with 3x400Vac input), a 400ms start-up delay, and a rise time of 40ms (nominal input; constant full current load; 0mF load capacitance) to 70ms (nominal input; constant full current load; 27mF load capacitance). The fixed output voltage is 36Vdc with a 700mV turn-ON overshoot, and it offers a hold time of 2.6ms (buffer time at 3x400Vdc input). Power dissipation/losses are calculated at 45.2 W (3x400Vdc input; full output load), and the electrical durability is rated at 55000 hours (at 40°C; 26.6A output; 3AC 400Vdc input) to 156000 hours (at 25°C; 26.6A output; 3AC 400Vdc input). The output stage capacitance is 11100 µF, with a ripple of 2000mVpp (20Hz...2KHz; 50Ω). | Puls | Quick Quote | ||
| XT40.722 PULS XT40.722 is a power supply unit part of the X-series, designed to function as an AC/DC PSU/converter with a semi-regulated 25% power reserve and a DC-OK relay contact output. It operates on a supply voltage of 3x432-528Vac (440Vac / 480Vac / 500Vac / 525Vac nominal; 47-63Hz), with a turn-on voltage of 3 x 390Vac and a shutdown voltage of 3 x 355Vac. The unit's dimensions are W96mm x H124mm x D159mm, and it is encased in an aluminium housing with screw-clamp connections for installation. It has a rated current of 13.3A at 72Vdc and is designed for DIN rail mounting in a 3-phase (3AC) network. The ambient air temperature for operation ranges from -25 to +70°C. The XT40.722 has a net width of 96 mm and a peak current consumption of 4A max. inrush at 3x480Vac input. Its rated power is 24W/+60°C...+70°C (derating) 960W at 72Vdc and 1200W for a typical 15s, with protection functions including output overvoltage protection (91.1Vdc max.), active input inrush current limiter, and overload/short-circuit current protection. It is not designed for series or parallel operation to increase output power but supports 1+1 redundancy for higher system availability. The unit is resistant to back-feeding loads up to 87.9V. It has an efficiency of 0.955 at 3x480Vac input, with a 350ms start-up delay, 40ms rise time at nominal input and full current load without load capacitance, and 70ms with 13.3mF load capacitance. The output voltage is fixed at 72Vdc with a 1.4V turn-ON overshoot, a hold time of 3.6ms at 3x480Vdc input, power dissipation/losses of 45.2W at full output load, an output stage capacitance of 4050µF, and a ripple of 3000mVpp at 20Hz...2KHz with a 50Ω load. | Puls | Quick Quote | ||