770-994 WAGO Industrial Automation Components

WAGO 770-994 is an automation part with a short circuit breaking rating as per IEC/EN 60664-1, featuring a nominal voltage of 400V (III/3), a rated impulse voltage of 6kV (III/3), and a rated current of 25A. It adheres to overvoltage category III and pollution degree 3. For the US market, it is noted that some versions may be used for current interruption in select applications below 16A and up to 600V, according to UL 1977, which rates it for 600V and 23A. The part has approximately 1mΩ of contact resistance and 0.25mΩ contact transition plug/socket. It offers four total potentials with a preceding PE contact and a 4-pole connection. Physically, it has a pin spacing of 10mm, a width of 40mm, a height of 36.7mm, and a depth of 51mm. Designed for general mains applications, it features coding A, marking N PE 2/L 1/L', and potential marking N PE 2/L 1/L'. The mating force of a plug-in connection is approximately 20...70N, with a retention force when locked >80N, and an unmating force of approximately 20...70N. It supports 200 mating cycles without resistive load and is an h-distribution connector with outputs at one end. The protection type is IP20, and when mated, IP2xC. The plug-in connection is a socket/plug type with mismating protection and a locking lever for secure locking. The part is white, made from Polyamide (PA66) with a flammability class of V0, and uses copper or copper alloy contacts with tin plating. It has a fire load of 0.534MJ and weighs 31.6g. It can operate between -5...+40°C and has a continuous operating temperature range of -35...+85°C. It is RoHS compliant without exemption, packaged in boxes of 25 pieces, and has a GTIN of 4045454982041. The country of origin is DE, with a customs tariff number of 85366990990.