756-1506/060-020 WAGO Cable Assemblies

WAGO 756-1506/060-020 is a B-coded automation part featuring an M12 socket to M12 plug connection type with a 5 pole number. The cable connection direction to mating direction is set at 90°. It has a cable length of 2m and is designed for use with WAGO PLCs. The operating voltage and current are 60V and 4A, respectively, with a rated surge voltage of 1.5kV per IEC 61076-2-101 and a contact resistance of 10mΩ. The insulation resistance is greater than or equal to 5 x 10^9Ω, and the conductor resistance is less than or equal to 130Ω/km. It features a bending radius of 5 x cable diameter (min.) and is capable of 5 million bending cycles. The part is suitable for drag chain applications and has a sheathed cable diameter of 6.8mm. The type code is KS-6Y3GC11Y 4x2xAWG26/19 shielded with a tinned copper braid shield offering approximately 90% optical coverage. The conductor configuration is bare copper wire (AWG 26/19) with FEP insulation. The housing material is TPU/TPU, in black (RAL 9005), and the contact material is CuZn with CuNi/Au plating. The connections feature a hexagon knurled nut CuZn with a nickel-plated surface and a sealing ring made of FPM (Viton). It supports up to 100 mating cycles and requires a tightening torque of 1Nm. The part weighs 10g and is colored yellow. It operates within an ambient temperature range of 0 to +50°C dynamically and -30 to +50°C statically, with an IP67 protection type and a pollution degree of 3/2 per IEC 60664-1. The product complies with RoHS, including an exemption under 6(c), and has multiple SCIP notification numbers for various EU countries.