Name: RKFP 55-3M
Brand: Turck
Price: 46.2 USD
Availability: InStock

This item can ship within 24h!

RSC RKC 572-2M

Cable for DeviceNet and CANopen, Extension Cable, Cable length (L) 2 m, M12 female connector, straight, A-coded, M12 male connector, straight, A-coded, M12, Male, Straight, 5-pin, A-Code, M12, Female, Straight, 5-pin, A-Code, Shielded Twisted Pair, Fieldbus Technology Cable, fieldbus type: DeviceNet™, Gray PVC jacket, shielded, 2STPX22 AWG, Sunlight Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Cable length: 2 m

TurckSTOCK: 46

This item can ship within 24h!

2002-1301

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGOSTOCK: 100

This item can ship within 24h!

CP5.241

PULS CP5.241 is a power supply unit designed for DIN rail mounting with a net width of 32 mm and an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C. The unit features a current consumption of 7A peak max. inrush at both 230Vac and 120Vac inputs. Its efficiency rates are 0.943 at 230Vac input, 0.935 at 120Vac input, and 0.927 at 100Vac input. The dimensions of the CP5.241 are W32mm x H124mm x D102mm. It has a start-up delay of 380-420ms for 100-230Vac input, with rise times of 80ms and 100ms under nominal input with constant full current load at 0mF and 5mF load capacitance, respectively. The unit includes protection functions such as output overvoltage protection and overload/short-circuit protection, with the capability for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 7.3 W at 230Vac input and 8.2 W at 120Vac input with full output load. The output stage capacitance is 1800 µF. Electrical durability varies with conditions, reaching up to 775000 hours at 25°C and 2.5A output with 1AC 230Vac input. The ripple is 50mVpp across 20Hz to 20MHz at 50Ω. This AC/DC power supply unit, part of the CP-series, is designed with a 20% power reserve and includes a DC-OK relay contact output. It features screw-clamp connections and supports a supply voltage range of 85Vac-264Vac for AC and 110Vdc-180Vdc for DC, with a rated current of 5A at 24Vdc. The output voltage is adjustable between 24Vdc and 28Vdc, with a 200mV turn-ON overshoot and a hold time of 35ms at 120/230Vac input.

PulsSTOCK: 4

This item can ship within 24h!

RK 4.4T-0.3

Actuator and Sensor Cordset, Connection Cable, Cable length (L) 0.3 m, M12, Female, Straight, 4-pin, IP67, IP68, Instrumentation Tray Cable, Gray PVC jacket, 4X22 AWG, Sunlight Resistant, -40 Cold Bend Rating, Oil Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Flexlife® and C-Track Approved, Cable length: 0.3 m

TurckSTOCK: 19

This item can ship within 24h!

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider ElectricSTOCK: 6

This item can ship within 24h!

XS2RO

Banner Engineering XS2RO is a 2-channel safety relay module designed for ensuring operational safety in various applications. It operates with a supply voltage of 24Vdc and features screw connections for secure installation. This module is protected by an IP20 NEMA 1 rated enclosure, indicating it is protected against solid objects larger than 12.5mm but not against water. It is designed for DIN rail mounting, facilitating easy integration into existing systems. The XS2RO measures 110 mm in height, 129 mm in depth, and 23 mm in width, making it compact for fitting into tight spaces. It can operate within an ambient air temperature range of 0 to +55°C. The module provides 2 safety outputs, each consisting of 2 Normally Open (NO) contacts in series (2NO / 2xSPST-NO each made of 2 N.O. contacts in series; 6A) and 1 auxiliary output composed of 2 Normally Closed (NC) contacts in parallel (1NC / SPST-NC made of 2 N.C. contacts in parallel; 2.5A), resulting in a configuration of 4NO+2NC contacts for comprehensive safety and control.

BannerSTOCK: 4

This item can ship within 24h!

M9U31110

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

Schneider ElectricSTOCK: 5

This item can ship within 24h!

HJF36060

Schneider Electric - HJF36060

Schneider ElectricSTOCK: 20

This item can ship within 24h!

RSC RKC 572-2M

Cable for DeviceNet and CANopen, Extension Cable, Cable length (L) 2 m, M12 female connector, straight, A-coded, M12 male connector, straight, A-coded, M12, Male, Straight, 5-pin, A-Code, M12, Female, Straight, 5-pin, A-Code, Shielded Twisted Pair, Fieldbus Technology Cable, fieldbus type: DeviceNet™, Gray PVC jacket, shielded, 2STPX22 AWG, Sunlight Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Cable length: 2 m

TurckSTOCK: 46

This item can ship within 24h!

2002-1301

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGOSTOCK: 100

This item can ship within 24h!

CP5.241

PULS CP5.241 is a power supply unit designed for DIN rail mounting with a net width of 32 mm and an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C. The unit features a current consumption of 7A peak max. inrush at both 230Vac and 120Vac inputs. Its efficiency rates are 0.943 at 230Vac input, 0.935 at 120Vac input, and 0.927 at 100Vac input. The dimensions of the CP5.241 are W32mm x H124mm x D102mm. It has a start-up delay of 380-420ms for 100-230Vac input, with rise times of 80ms and 100ms under nominal input with constant full current load at 0mF and 5mF load capacitance, respectively. The unit includes protection functions such as output overvoltage protection and overload/short-circuit protection, with the capability for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 7.3 W at 230Vac input and 8.2 W at 120Vac input with full output load. The output stage capacitance is 1800 µF. Electrical durability varies with conditions, reaching up to 775000 hours at 25°C and 2.5A output with 1AC 230Vac input. The ripple is 50mVpp across 20Hz to 20MHz at 50Ω. This AC/DC power supply unit, part of the CP-series, is designed with a 20% power reserve and includes a DC-OK relay contact output. It features screw-clamp connections and supports a supply voltage range of 85Vac-264Vac for AC and 110Vdc-180Vdc for DC, with a rated current of 5A at 24Vdc. The output voltage is adjustable between 24Vdc and 28Vdc, with a 200mV turn-ON overshoot and a hold time of 35ms at 120/230Vac input.

PulsSTOCK: 4

This item can ship within 24h!

RK 4.4T-0.3

Actuator and Sensor Cordset, Connection Cable, Cable length (L) 0.3 m, M12, Female, Straight, 4-pin, IP67, IP68, Instrumentation Tray Cable, Gray PVC jacket, 4X22 AWG, Sunlight Resistant, -40 Cold Bend Rating, Oil Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Flexlife® and C-Track Approved, Cable length: 0.3 m

TurckSTOCK: 19

This item can ship within 24h!

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider ElectricSTOCK: 6

This item can ship within 24h!

XS2RO

Banner Engineering XS2RO is a 2-channel safety relay module designed for ensuring operational safety in various applications. It operates with a supply voltage of 24Vdc and features screw connections for secure installation. This module is protected by an IP20 NEMA 1 rated enclosure, indicating it is protected against solid objects larger than 12.5mm but not against water. It is designed for DIN rail mounting, facilitating easy integration into existing systems. The XS2RO measures 110 mm in height, 129 mm in depth, and 23 mm in width, making it compact for fitting into tight spaces. It can operate within an ambient air temperature range of 0 to +55°C. The module provides 2 safety outputs, each consisting of 2 Normally Open (NO) contacts in series (2NO / 2xSPST-NO each made of 2 N.O. contacts in series; 6A) and 1 auxiliary output composed of 2 Normally Closed (NC) contacts in parallel (1NC / SPST-NC made of 2 N.C. contacts in parallel; 2.5A), resulting in a configuration of 4NO+2NC contacts for comprehensive safety and control.

BannerSTOCK: 4

This item can ship within 24h!

M9U31110

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

Schneider ElectricSTOCK: 5

This item can ship within 24h!

HJF36060

Schneider Electric - HJF36060

Schneider ElectricSTOCK: 20

This item can ship within 24h!

RSC RKC 572-2M

Cable for DeviceNet and CANopen, Extension Cable, Cable length (L) 2 m, M12 female connector, straight, A-coded, M12 male connector, straight, A-coded, M12, Male, Straight, 5-pin, A-Code, M12, Female, Straight, 5-pin, A-Code, Shielded Twisted Pair, Fieldbus Technology Cable, fieldbus type: DeviceNet™, Gray PVC jacket, shielded, 2STPX22 AWG, Sunlight Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Cable length: 2 m

TurckSTOCK: 46

This item can ship within 24h!

2002-1301

Wago 2002-1301 is a feed-through terminal block featuring push-in CAGE CLAMP spring connections. It supports a variety of rated currents including 24A (IEC), 32A (IEC), 20A (UL), 20A (CSA), 22A (Ex e II), and 20A (Ex e II with jumper). This 1-deck terminal block is designed with side and center marking slots, making it suitable for Ex e II applications. It has a net height of 8 kV for impulse voltage, a width accommodating 1 feed-through pole (1P), and is compatible with DIN-35 rail mounting. The terminal block is colored gray and measures H59.2mm x W5.2mm x D32.9mm. It accepts wire sizes from 0.25mm2 to 4mm2 for fine stranded or solid conductors and #22AWG to #12AWG for fine stranded or solid conductors, with a 2.5mm2 nominal cross-section. The material is Polyamide (PA) 66, and it includes 3-wire connections (1 push-in + 2 push-in) (1+2). The terminal block is rated for voltages up to 800 V (IEC), 600 V (UL/CSA), and 550 V (Ex e II), and is part of the TOPJOB S series.

WAGOSTOCK: 100

This item can ship within 24h!

CP5.241

PULS CP5.241 is a power supply unit designed for DIN rail mounting with a net width of 32 mm and an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C. The unit features a current consumption of 7A peak max. inrush at both 230Vac and 120Vac inputs. Its efficiency rates are 0.943 at 230Vac input, 0.935 at 120Vac input, and 0.927 at 100Vac input. The dimensions of the CP5.241 are W32mm x H124mm x D102mm. It has a start-up delay of 380-420ms for 100-230Vac input, with rise times of 80ms and 100ms under nominal input with constant full current load at 0mF and 5mF load capacitance, respectively. The unit includes protection functions such as output overvoltage protection and overload/short-circuit protection, with the capability for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 7.3 W at 230Vac input and 8.2 W at 120Vac input with full output load. The output stage capacitance is 1800 µF. Electrical durability varies with conditions, reaching up to 775000 hours at 25°C and 2.5A output with 1AC 230Vac input. The ripple is 50mVpp across 20Hz to 20MHz at 50Ω. This AC/DC power supply unit, part of the CP-series, is designed with a 20% power reserve and includes a DC-OK relay contact output. It features screw-clamp connections and supports a supply voltage range of 85Vac-264Vac for AC and 110Vdc-180Vdc for DC, with a rated current of 5A at 24Vdc. The output voltage is adjustable between 24Vdc and 28Vdc, with a 200mV turn-ON overshoot and a hold time of 35ms at 120/230Vac input.

PulsSTOCK: 4

This item can ship within 24h!

RK 4.4T-0.3

Actuator and Sensor Cordset, Connection Cable, Cable length (L) 0.3 m, M12, Female, Straight, 4-pin, IP67, IP68, Instrumentation Tray Cable, Gray PVC jacket, 4X22 AWG, Sunlight Resistant, -40 Cold Bend Rating, Oil Resistant, Flame Ratings: UL 1685 FT4, UL1061, CSA FT4, Flexlife® and C-Track Approved, Cable length: 0.3 m

TurckSTOCK: 19

RKFP 55-3M

Product details

This part can ship within 24 hours

$46.20

$46.20

Relevant products

RSC RKC 572-2M

2002-1301

CP5.241

RK 4.4T-0.3

QO1HPL

XS2RO

M9U31110

HJF36060

RSC RKC 572-2M

2002-1301

CP5.241

RK 4.4T-0.3

QO1HPL

XS2RO

M9U31110

HJF36060

RSC RKC 572-2M

2002-1301

CP5.241

RK 4.4T-0.3

What can I help you find today?