Powermatic Associates Logo

QOB2355238 Schneider Electric Industrial Automation Components

QOB2355238 on Powermatic Associates
Schneider Electric

Part#:QOB2355238

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Square D by Schneider Electric QOB2355238 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 35A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 8-2AWG for one copper cable. It is a 2 Pole circuit breaker with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are designed for ring tongue connections.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

MG17466 on Powermatic Associates

MG17466

Schneider Electric

Schneider Electric MG17466 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 3-pole device is rated for a current of 15A and operates at a rated voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac and 5kA AIR at 480Y/277Vac. All three poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D326BL on Powermatic Associates

LC1D326BL

Schneider Electric

Schneider Electric LC1D326BL is a magnetic contactor from the Deca sub-range, featuring a low-consumption coil that consumes less than 2.4W. It is designed with ring-lugs connections and has three poles (3P; 3NO) with a rated current of 50A for AC-1 and 32A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated active power ranging from 7.5kW at 220-230Vac to 18.5kW at 660-690Vac in AC-3. It also features 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower varies from 2HP at 115Vac in single-phase to 25HP at 575-600Vac in three-phase, according to UL/CSA standards. Its mechanical durability is rated at 15 million operations at no load, and its electrical durability is rated at 1.6 million operations with load. The rated voltage (AC) phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

4 in stock
ZB4BW33 on Powermatic Associates

ZB4BW33

Schneider Electric

Schneider Electric ZB4BW33 is a chromium-plated, metal bezel illuminated flush head designed for integral LED use within the XB4 sub-range. This round-shaped head features a plain lens, green light color, and operates on a spring-return (impulse/momentary) mechanism. It boasts a degree of protection rated at IP66 and has a diameter of 22 mm.

1 in stock
HDF36070 on Powermatic Associates

HDF36070

Schneider Electric

Square D by Schneider Electric HDF36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, designed as a PowerPact H-Frame 150 TMD 3P 70A 600Vac/250Vdc with a 14kA busbar rated at 80%. It features a Term. nut kit for fixed busbar connection on both line and load sides, with three poles (3P). This MCCB offers thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 70A, a rated insulation voltage (Ui) of 750 V, and operates at rated voltages of 600Vac 600Y/347Vac and 250Vdc. The unit is designed for individual mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It provides an IP40 degree of protection and operates via a toggle (manual) mode. Protection settings include over-current fixed at 70A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 70 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

1 in stock
MD-CC404-000 on Powermatic Associates

MD-CC404-000

Schneider Electric

Comm Convrtr,USB_485/422,9pin, Sub-D,R

1 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

94 in stock

Manufacturer warranty

QOB2355238 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

Square D by Schneider Electric QOB2355238 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 35A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 8-2AWG for one copper cable. It is a 2 Pole circuit breaker with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are designed for ring tongue connections.

Similar products from: Industrial Automation Components

This item can ship within 24h!

EX-13EA on Powermatic Associates

EX-13EA

Verified stock: 44

Panasonic EX-13EA is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor is characterized by an IP67 degree of protection, ensuring its operation in various environmental conditions. It emits red light with a wavelength of 680 nm and can detect opaque objects as small as 2mm / 0.079". The EX-13EA features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". For protection, it includes outputs short-circuit protection. This ultra-slim photo-electric sensor emitter+receiver pair is designed for side sensing with built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

This item can ship within 24h!

EX-13A on Powermatic Associates

EX-13A

Verified stock: 8

Panasonic EX-13A is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The EX-13A features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". This sensor is equipped with output short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with front sensing and built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

This item can ship within 24h!

DP-102-M on Powermatic Associates

DP-102-M

Verified stock: 43

Panasonic DP-102-M is a dual display digital high pressure sensor designed for air and non-corrosive gases, featuring a main function as a sensor with pressure detection capabilities. It offers 1 x analog output (1-5Vdc / 4-20mA) and 2 x digital outputs (NPN open-collector / 24Vdc / 100mA) with comparative outputs 1 & 2, including an orange LED as a visual position indicator. The degree of protection provided is IP40, ensuring a basic level of protection against solid objects. It includes protection functions such as outputs short-circuit protection. The sensor supports various comparative output operations (NO / NC selectable by key) and modes (EASY mode / Hysteresis mode / Window comparator mode), with a comparative output response time ranging from 2.5ms to 1000ms selectable. Connection is facilitated through an M5 threaded port plus a 2m cable with connector. Measurement accuracy is highlighted by comparative output repeatability of (+/-0.2% F.S.). The display features a 4-digit LED display alongside a 4-digit red / orange / green LED display for clear and precise readings.

Panasonic

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock