Powermatic Associates Logo

ILE1R661PB1A1 Schneider Electric Industrial Automation Components

ILE1R661PB1A1 on Powermatic Associates
Schneider Electric

Part#:ILE1R661PB1A1

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric ILE1R661PB1A1 is a DC gearmotor within the servo motors sub-range, featuring an integrated DC brushless motor. It is designed with an incremental encoder (12ppr), a keyed shaft, and a straight-tooth gearbox. This gearmotor has a single motor stack, providing medium rotation speed and medium torque. It connects via a printed circuit board (P.C.B.) connector and uses the RS-485 communication protocol. The ILE1R661PB1A1 includes a Safe Torque OFF (STO) protection function and operates on a supply voltage of 24Vdc to 36Vdc. It is mounted using a 66x66mm flange and measures 104 mm in height, 66 mm in width, and 174 mm in depth. The gearmotor delivers a torque of 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. It has a moment of inertia of 48kg.cm^2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. The stall torque is 0.26Nm at 24Vdc and 0.36Nm at 36Vdc, with a gear ratio of 1/18.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

MG17466 on Powermatic Associates

MG17466

Schneider Electric

Schneider Electric MG17466 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 3-pole device is rated for a current of 15A and operates at a rated voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac and 5kA AIR at 480Y/277Vac. All three poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D326BL on Powermatic Associates

LC1D326BL

Schneider Electric

Schneider Electric LC1D326BL is a magnetic contactor from the Deca sub-range, featuring a low-consumption coil that consumes less than 2.4W. It is designed with ring-lugs connections and has three poles (3P; 3NO) with a rated current of 50A for AC-1 and 32A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated active power ranging from 7.5kW at 220-230Vac to 18.5kW at 660-690Vac in AC-3. It also features 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower varies from 2HP at 115Vac in single-phase to 25HP at 575-600Vac in three-phase, according to UL/CSA standards. Its mechanical durability is rated at 15 million operations at no load, and its electrical durability is rated at 1.6 million operations with load. The rated voltage (AC) phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

4 in stock
HDF36070 on Powermatic Associates

HDF36070

Schneider Electric

Square D by Schneider Electric HDF36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, designed as a PowerPact H-Frame 150 TMD 3P 70A 600Vac/250Vdc with a 14kA busbar rated at 80%. It features a Term. nut kit for fixed busbar connection on both line and load sides, with three poles (3P). This MCCB offers thermal protection for overload and magnetic protection for short-circuit scenarios. It has a rated current of 70A, a rated insulation voltage (Ui) of 750 V, and operates at rated voltages of 600Vac 600Y/347Vac and 250Vdc. The unit is designed for individual mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It provides an IP40 degree of protection and operates via a toggle (manual) mode. Protection settings include over-current fixed at 70A, short-circuit hold current fixed at 800A, and short-circuit trip current fixed at 1450A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 70 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

1 in stock
NSYTBP16128T on Powermatic Associates

NSYTBP16128T

Schneider Electric

Schneider Electric - NSYTBP16128T

25 in stock
M9F53350 on Powermatic Associates

M9F53350

Schneider Electric

Schneider Electric M9F53350 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 3 Pole configuration and a rated current of 50A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. This MCB offers a short circuit breaking rating of 10kA AIR at 120Vac, 240Vac, and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and ensures all three poles are protected. The tripping curve for this device is classified as D.

1 in stock
XB7EV05MP on Powermatic Associates

XB7EV05MP

Schneider Electric

Schneider Electric XB7EV05MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, indicating a high level of protection against dust, water, and other environmental factors. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It is designed with screw-clamp type terminals for secure connections. The light emitted by the LED is yellow. The physical dimensions of the XB7EV05MP include a diameter of 22 mm, a net height of 29 mm, a net depth of 54 mm, and a net width of 29 mm.

6 in stock

Manufacturer warranty

ILE1R661PB1A1 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

ILE1R661PC1A5 on Powermatic Associates

ILE1R661PC1A5

Verified stock: 0

Schneider Electric ILE1R661PC1A5 is a DC Gearmotor within the Servo motors sub-range, featuring an integrated DC brushless motor with an incremental encoder (12ppr) and a hollow-shaft tapered worm gearbox. It is designed for a single (1) motor stack, offering medium rotation speed and medium torque. The connection type is an industrial connector, and it supports the RS-485 communication protocol. It includes a Safe Torque OFF (STO) protection function. The supply voltage ranges from 24Vdc to 36Vdc. This gearmotor is mounted via a 66x66mm flange, with dimensions of 104 mm in height, 66 mm in width, and 229 mm in depth. It delivers a torque of 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. The moment of inertia is 90kg.cm2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. Stall torque is 0.26Nm at 24Vdc and 0.36Nm at 36Vdc, with a gear ratio of 1/24.

Schneider Electric

ILE1R661PB1A7 on Powermatic Associates

ILE1R661PB1A7

Verified stock: 0

Schneider Electric ILE1R661PB1A7 is a DC Gearmotor within the Servo motors sub-range, featuring an integrated DC brushless motor. It is designed with an incremental encoder (12ppr) and a hollow-shaft tapered worm gearbox. This gearmotor has a single (1) motor stack, providing medium rotation speed and medium torque. It connects via a printed circuit board (P.C.B.) connector and uses the RS-485 communication protocol. For safety, it includes a Safe Torque OFF (STO) protection function. The supply voltage ranges from 24Vdc to 36Vdc. It mounts with a 66x66mm flange and has dimensions of 104 mm in height, 66 mm in width, and 229 mm in depth. The torque is rated at 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. The moment of inertia is 1270kg.cm2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. Stall torque is 0.26Nm at 24Vdc and 0.36Nm at 36Vdc, with a gear ratio of 1/92.

Schneider Electric

ILE1F661PC1A6 on Powermatic Associates

ILE1F661PC1A6

Verified stock: 0

Schneider Electric ILE1F661PC1A6 is a DC Gearmotor within the Servo motors sub-range, featuring an integrated DC brushless motor. It is designed with an incremental encoder (12ppr) and a hollow-shaft tapered worm gearbox. This gearmotor has a single (1) motor stack, providing medium rotation speed and medium torque. It utilizes an industrial connector for its connection type and supports the CANopen communication protocol. For safety, it includes the Safe Torque OFF (STO) protection function. The supply voltage ranges from 24Vdc to 36Vdc. It is mounted via a 66x66mm flange, with dimensions of 104 mm in height, 66 mm in width, and 229 mm in depth. The torque specifications are 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. The moment of inertia is 430kg.cm2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. Stall torque values are 0.26Nm at 24Vdc and 0.36Nm at 36Vdc, with a gear ratio of 1/54.

Schneider Electric

ILE1B661PC1A5 on Powermatic Associates

ILE1B661PC1A5

Verified stock: 0

Schneider Electric ILE1B661PC1A5 is a DC Gearmotor within the Servo motors sub-range, featuring an integrated DC brushless motor with an incremental encoder (12ppr) and a hollow-shaft tapered worm gearbox. It is designed for single (1) motor stack configurations, offering medium rotation speed and medium torque. The connection is facilitated through an industrial connector, and it supports the PROFIBUS DP communication protocol. It includes a Safe Torque OFF (STO) protection function. The gearmotor operates on a supply voltage of 24Vdc to 36Vdc and is mounted via a 66x66mm flange. It has dimensions of 104 mm in height, 66 mm in width, and 229 mm in depth. The torque specifications are 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. The moment of inertia is rated at 90kg.cm2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. Stall torque values are 0.26Nm for 24Vdc and 0.36Nm for 36Vdc, with a gear ratio of 1/24.

Schneider Electric

ILE1B661PC1A3 on Powermatic Associates

ILE1B661PC1A3

Verified stock: 0

Schneider Electric ILE1B661PC1A3 is a DC Gearmotor within the Servo motors sub-range, featuring an integrated DC brushless motor. It is designed with an incremental encoder (12ppr), a keyed shaft, and a straight-tooth gearbox. This model has a single motor stack, offering medium rotation speed and medium torque. It utilizes an industrial connector for its connection type and supports the PROFIBUS DP communication protocol. The gearmotor is equipped with Safe Torque OFF (STO) protection functions and operates on a supply voltage of 24Vdc to 36Vdc. It is mounted via a 66x66mm flange and has dimensions of 104 mm in height, 66 mm in width, and 174 mm in depth. The torque specifications are 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. The moment of inertia is 441kg.cm2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. Stall torque values are 0.26Nm at 24Vdc and 0.36Nm at 36Vdc, with a gear ratio of 1/54.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric ILE1R661PB1A1 is a DC gearmotor within the servo motors sub-range, featuring an integrated DC brushless motor. It is designed with an incremental encoder (12ppr), a keyed shaft, and a straight-tooth gearbox. This gearmotor has a single motor stack, providing medium rotation speed and medium torque. It connects via a printed circuit board (P.C.B.) connector and uses the RS-485 communication protocol. The ILE1R661PB1A1 includes a Safe Torque OFF (STO) protection function and operates on a supply voltage of 24Vdc to 36Vdc. It is mounted using a 66x66mm flange and measures 104 mm in height, 66 mm in width, and 174 mm in depth. The gearmotor delivers a torque of 0.175Nm at 4000rpm with 24Vdc and 0.24Nm at 4800rpm with 36Vdc. It has a moment of inertia of 48kg.cm^2, with rotational speeds of 4000rpm at 24Vdc and 4800rpm at 36Vdc. The stall torque is 0.26Nm at 24Vdc and 0.36Nm at 36Vdc, with a gear ratio of 1/18.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock