BSH0703P31F1A Schneider Electric Servo Motors

Out if stock but available for backorder.

Schneider Electric BSH0703P31F1A is an AC servo motor within the Servo motors sub-range, featuring an absolute single-turn 128ppr SinCos encoder, a keyed shaft with holding brake, and triple motor stacks designed for optimized torque and speed of rotation with low inertia. It operates on a supply voltage range of 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. The connection type is a straight connector, and it boasts an IP65 degree of protection. The rated current varies with speed and voltage, being 3.9A at 1500rpm and 115Vac, 3.7A at 3000rpm and 230Vac, 3A at 6000rpm and 400Vac, and 2.65A at 7200rpm and 480Vac. It mounts via a 70x70mm flange and uses the HIPERFACE communication protocol. The dimensions are 111.5 mm in height, 245 mm in depth, and 70 mm in width. It operates efficiently within an ambient air temperature range of -20 to +40 °C. The rotational speeds are 1500rpm, 3000rpm, 6000rpm, and 7200rpm at respective voltages, with rated active power ranging from 0.46kW at 1500rpm and 115Vac to 1.55kW at 7200rpm and 480Vac. The maximum torque is 11.3Nm, with a stall torque of 3.1Nm and operational torques of 2.95Nm at 1500rpm and 115Vac, 2.8Nm at 3000rpm and 230Vac, 2.3Nm at 6000rpm and 400Vac, and 2.05Nm at 7200rpm and 480Vac. The moment of inertia is 0.616kg.cm^2.