Powermatic Associates Logo

ATV32HU11M2 Schneider Electric Variable Frequency Drives (VFD)

ATV32HU11M2 on Powermatic Associates
Schneider Electric

Part#:ATV32HU11M2

Manufacturer:Schneider Electric

Category:Variable Frequency Drives (VFD)

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric ATV32HU11M2 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 32 series, designed for controlling motor speed by varying the supply frequency. It incorporates advanced safety functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), and SDI (Safe Direction Information). The drive offers sensorless flux vector control and supports a sensorless ratio for synchronous motors, delivering 170-200% of the nominal motor torque. It features a built-in EMC filter and heatsink, operates on a single-phase supply voltage ranging from 170-264Vac, and is designed with an IP20 degree of protection. The unit's dimensions are H317mm x W60mm x D245mm. It has a rated current of 6.9A at 4kHz, with a maximum current capacity of 6.9A for 60 seconds. Communication is facilitated via Modbus and CANopen protocols. The output frequency range is 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 4 digital inputs (24Vdc; sink/source) plus additional configurable inputs, 1 digital output (24Vdc; sink/source), 1 digital output with C/O SPDT relay contact, and another with NO relay contact. There are also 2 analog inputs (-10...+10Vdc) and 1 analog input (0-20mA / 4-20mA). The current consumption is 13.6A at 200Vac and 11.5A at 240Vac, with a rated active power of 1.1kW and rated power of 1.5HP / 1-1/2HP. Power dissipation/losses are calculated at 64 W.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Variable Frequency Drives (VFD) that you can order at Powermatic Associates site. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the ATV32HU11M2 Schneider Electric price in the box on the right side or send a quick quote.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

ATV32HU11M2 Description

Schneider Electric ATV32HU11M2 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 32 series, designed for controlling motor speed by varying the supply frequency. It incorporates advanced safety functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), and SDI (Safe Direction Information). The drive offers sensorless flux vector control and supports a sensorless ratio for synchronous motors, delivering 170-200% of the nominal motor torque. It features a built-in EMC filter and heatsink, operates on a single-phase supply voltage ranging from 170-264Vac, and is designed with an IP20 degree of protection. The unit's dimensions are H317mm x W60mm x D245mm. It has a rated current of 6.9A at 4kHz, with a maximum current capacity of 6.9A for 60 seconds. Communication is facilitated via Modbus and CANopen protocols. The output frequency range is 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 4 digital inputs (24Vdc; sink/source) plus additional configurable inputs, 1 digital output (24Vdc; sink/source), 1 digital output with C/O SPDT relay contact, and another with NO relay contact. There are also 2 analog inputs (-10...+10Vdc) and 1 analog input (0-20mA / 4-20mA). The current consumption is 13.6A at 200Vac and 11.5A at 240Vac, with a rated active power of 1.1kW and rated power of 1.5HP / 1-1/2HP. Power dissipation/losses are calculated at 64 W.

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Relevant products

ATV320U07N4C on Powermatic Associates

ATV320U07N4C

Verified stock: 1

Schneider Electric ATV320U07N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 320 series. It features a range of functions including STO (Safe Torque Off up to SIL3 / PLe), SS1 (Safe Stop 1), SLS (Safely Limited Speed), SMS (Safe maximum speed), GDL (Guard door locking), and U/F ratio adjustments (2 points / 5 points / energy saving / quadratic). It offers sensorless flux vector control in standard or energy-saving modes and integrates with MachineStruxure in SoMachine. The drive allows operation in velocity mode and torque control with current limitation, and supports customizable application functions with ATV Logic, allowing up to 50 function blocks. It is designed with a built-in EMC filter, a compact control block, and is ATEX compliant. The supply voltage ranges from 323-550Vac, with dimensions of H143mm x W105mm x D158mm, and an IP20 degree of protection. It has a rated current of 2.3A at 4kHz and a maximum current of 3.5A for 60 seconds. Suitable for cabinet mounting, it uses Modbus and CANopen communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 4 digital inputs plus additional specialized inputs, 2 digital outputs, and 3 analog inputs. The current consumption is 3.6A at 380Vac and 2.8A at 500Vac, with a rated active power of 750W / 0.75kW, rated power of 1HP, and power dissipation/losses of 38 W.

Schneider Electric

ATV340D22N4E on Powermatic Associates

ATV340D22N4E

Verified stock: 5

Schneider Electric ATV340D22N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with sensor, and master/slave daisy chain through PTO/PTI. It supports MachineStruxure integration in SoMachine, operates in velocity mode and torque control, and offers dynamic motor control performance with up to 400Hz speed bandwidth for cyclic application tasks (1ms). The drive includes an energy-saving mode, a built-in EMC filter (class C3), and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. The rated current is 62A for normal-duty and 46A for heavy-duty at 4kHz, with a maximum current of 84A for normal-duty and 83A for heavy-duty for 2s, and 68.2A for normal-duty and 69A for heavy-duty for 60s. It is designed for cabinet mounting and uses Ethernet/IP and Modbus TCP for communication. The network is 3-phase (3P) with an output frequency of 1-599 Hz. It includes 1 analog output, 5 digital inputs plus additional inputs for Safe Torque Off and pulse input, 2 digital outputs programmable as inputs or outputs, and 1 analog input capable of accepting various signal types. The current consumption is specified for different conditions, and the rated active power is 30kW for normal-duty and 22kW for heavy-duty, equivalent to 40HP and 30HP respectively.

Schneider Electric

ATV340D15N4 on Powermatic Associates

ATV340D15N4

Verified stock: 3

Schneider Electric ATV340D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless and current vector control with or without sensor, and Master/Slave daisy chain through PTO/PTI. It is integrated with MachineStruxure in SoMachine, operates in velocity mode and torque control, and offers 220% Tn in open or closed loop control. The drive provides dynamic motor control performance with up to 400Hz speed bandwidth and supports cyclic application tasks with 1ms. It includes an energy-saving mode, built-in EMC filter (class C3), and built-in heatsink. The supply voltage ranges from 323-528Vac, with dimensions of H385mm x W180mm x D249mm, and an IP20 degree of protection. Rated current is 39A for normal-duty and 32A for heavy-duty at 4kHz, with maximum currents of 53A (normal-duty) and 58A (heavy-duty) for 2s, and 42.9A (normal-duty) and 48A (heavy-duty) for 60s. It supports cabinet mounting, uses Modbus for communication, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 analog output, 5+1 digital inputs, 2 digital outputs programmable as inputs or outputs, 1 digital output with C/O SPDT relay contact, and 1 digital output with NO relay contact. It also features 2 analog inputs and has a current consumption of 42.3A to 44.9A depending on the mode and voltage, with a rated active power of 18.5kW for normal-duty and 15kW for heavy-duty, equivalent to 25HP and 20HP respectively.

Schneider Electric

MH31002P12F2200 on Powermatic Associates

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

MH30703P07F2200 on Powermatic Associates

MH30703P07F2200

Verified stock: 0

Schneider Electric MH30703P07F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. This motor features an absolute multi-turn 16ppr SinCos encoder, a smooth shaft with a holding brake, and triple (3) motor stacks designed for optimized torque and speed of rotation, catering to medium-inertia applications. It comes with a rotatable right-angled connector for flexible installation and supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Part of the Servo motors sub-range, it boasts an IP65 degree of protection, utilizes the HIPERFACE communication protocol, and achieves a rotational speed of 5000rpm. The motor has a stall torque of 3.4Nm, a rated active power of 1.3kW (1300W) or 1.8HP, a moment of inertia of 4kg.cm^2, a nominal torque of 2.3Nm, and can reach a maximum torque of 10.2Nm.

Schneider Electric

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17