PILZ-773601 Pilz Electrical Safety Devices

Out if stock but available for backorder.

Pilz PILZ-773601 is a Safety I/O unit designed for decentralized safety block applications. It supports a variety of loads including inductive, capacitive, and resistive, and can operate under short-term condensation conditions. This unit is suitable for surface mounting and operates within an ambient air temperature range of -30 to +60°C. It has a net height of 133 mm and is classified as a standard/safety unit with a rated current of 4A for supply voltage, a permitted output current range of 0-0.6A, and a residual current of 0.02mA at a "0" signal. The connection is facilitated through 4 x 5-pin M12 connectors for I/O ports and 4 x 5-pin M12 male and female connectors for the interface, secured with a screw interlock. It boasts an IP67 degree of protection and requires a supply voltage of 16.8-30Vdc, with a nominal 24Vdc. The unit is constructed from PBT/PET materials and has a rated voltage of 7.5Vdc minimum threshold voltage for signal change from "1" to "0" and 11.5Vdc maximum threshold voltage for signal change from "0" to "1". It supports a maximum cable length of 20m between test pulse output and input, with dimensions of 60 mm in width and 30 mm in depth. Power consumption is rated at 1.2 W for external power supply output. It can be stored in temperatures ranging from -40 to +70°C. The unit features 8 digital outputs and 8 digital inputs, with outputs being 1-pole positive-switching semiconductor outputs and inputs being 24Vdc with a type 1 classification to EN 61131-2. Processing times vary from 0.5 ms to 1.2 ms depending on the signal change direction, and it has a voltage drop of 0.2 V at the output.