PILZ-402241 Pilz Control Circuits

Out if stock but available for backorder.

Pilz PILZ-402241 is a safety controller designed for DIN rail mounting, featuring a safe evaluation unit with an LED status indicator. It operates within an ambient air temperature range of -20 to +60°C and has a net height of 90.5 mm. This controller is specifically designed for mode selection and requires an external fuse protection rated at 4A for a 24Vdc circuit with characteristics B/C. It offers plug-in/detachable spring-loaded terminal connections for ease of installation. The degree of protection provided is IP20, and it operates on a supply voltage range of 20.4-26.4Vdc, with 24Vdc nominal. The material composition includes a PC front and bottom. It supports a maximum cable length of 1000m with a 9mm stripping length for spring-loaded terminal connections. The net width and depth are 90 mm and 25 mm, respectively, accommodating a cross-section of 0.2...2.5mm2 / 24AWG...12AWG. It is designed to withstand an ambient air temperature range for storage of -20 to +70°C. The controller features 17 digital outputs for safety, which are positive-switching 1-pole semiconductor outputs operating at 24Vdc, 50mA, 12W, with specific signal level characteristics. It includes short-circuit proof protection functions and has a variety of response times for different operations, ranging from 50ms to 10s. The rated impulse voltage is 0.8 kV, with a rated insulation voltage of 60 V. It also includes 4 safety inputs and 3 standard inputs, each designed for a 24Vdc operation with specific signal level requirements. The time delay after supply voltage application is 1s, with a processing time of 20 ms in case of supply interruption before de-energization.