Powermatic Associates Logo

62.32.9.024.0006 Finder Control Relays

62.32.9.024.0006 on Powermatic Associates
Finder

Part#:62.32.9.024.0006

Manufacturer:Finder

Category:Control Relays

Product Lifecycle:Active

Product description

Finder 62.32.9.024.0006 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc, with a reduced current rating of 0.6A at 110Vdc and 0.4A at 220Vdc under DC-1 conditions. It features Normally Open (NO) auxiliary contacts for DC-1 applications. The supply voltage is specified for 2C/O or DPDT (Double Pole Double Throw) configurations, with an ambient air temperature for operation and storage rated at 750VA (230Vac, AC-15) and 4000VA (250Vac, AC-1) respectively. The rated voltage for AC operation spans a wide range, from -40 to +70 degrees Celsius, with a control voltage (AC) of 4 kV. This relay is designed with 2 poles, a rear flange for residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The contact material is AgCdO (Silver Cadmium Oxide), supporting up to 30,000,000 operations. The protection functions are rated for 250Vac, and the relay operates with a communication protocol of C, with a supply voltage requirement of 24Vdc.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Finder Control Relays

55.32.8.120.0040 on Powermatic Associates

55.32.8.120.0040

Finder

Finder 55.32.8.120.0040 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1) and 10A at 30Vdc (DC-1), with lower current ratings of 0.25A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 2C/O / DPDT (Double Pole Double Throw), with an ambient air temperature for operation of 500VA at 230Vac and for storage at AC-15 of 2500VA at 250Vac. The rated voltage for AC operation is specified with a wide ambient temperature range of -40 to +85 degrees Celsius. It utilizes a communication protocol labeled as C and offers protection functions at 250Vac. The net depth of the part is 37.2 mm, with a control voltage (AC) of 4 kV and mounting mode dimensions of 27.7 mm by 20.7 mm. The rated active power is for 2 poles, and the power consumption is specified for a color code of 120Vac (50Hz/60Hz). The relay features plug-in mounting with a residual current sensitivity, and it is designed for up to 200,000 operations for Normally Closed (NC) circuits and a durability of 20,000,000 operations. The contact material is AgNi (Silver Nickel).

15 in stock
55.32.8.024.0040 on Powermatic Associates

55.32.8.024.0040

Finder

Finder 55.32.8.024.0040 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1), 10A at 30Vdc (DC-1), 0.25A at 110Vdc (DC-1), and 0.12A at 220Vdc (DC-1) with Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is capable of handling ambient air temperatures for operation and storage of -40 to +85 degrees Celsius. The relay has a rated voltage for AC operations, a communication protocol of type C, and includes protection functions at 250Vac. Its dimensions are specified with a net depth of 37.2 mm, a mounting mode width of 27.7 mm, and a power consumption length of 20.7 mm. The control voltage (AC) is rated at 4 kV, and it supports a rated active power of 2 poles. The relay is designed for plug-in mounting, has a color code of 24Vac (50Hz/60Hz), and is capable of 200,000 operations for Normally Closed (NC) circuits, with a durability of 20,000,000 operations. The contact material is AgNi (Silver Nickel).

10 in stock
060.48 on Powermatic Associates

060.48

Finder

Sheet of marker tags for thermal transfer prt. - Finder

19 in stock
55.33.9.024.0010 on Powermatic Associates

55.33.9.024.0010

Finder

Finder 55.33.9.024.0010 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1) and 10A at 30Vdc (DC-1), with lower current ratings of 0.25A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), capable of handling ambient air temperatures from -40 to +85 degrees Celsius for operation and is specified for 500VA at 230Vac and 2500VA at 250Vac in terms of rated active power. The rated voltage for AC operations is 250Vac, with a control voltage tolerance of 4 kV. This relay features a net depth of 37.2 mm, a mounting mode width of 27.7 mm, and a power consumption depth of 20.7 mm. It is designed for plug-in mounting, supports up to 200,000 operations for Normally Closed (NC) circuits, and has a durability of 50,000,000 operations. The contact material is AgNi (Silver Nickel).

10 in stock
40.52.7.024.0000 on Powermatic Associates

40.52.7.024.0000

Finder

Finder 40.52.7.024.0000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +85 degrees Celsius for both operation and storage. This relay has a rated voltage of 250Vac, a control voltage of 6 kV, and is designed for PCB or plug-in mounting. It features a net width of 29 mm, a net depth of 25 mm, and a power consumption of 0.5 W. The visual position indicator has a 5.3mm pins pitch, and the relay is capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The relay's poles are rated for 24Vdc, with a protection function of 250Vac, and it has a response time of 0.5 W.

7 in stock
55.34.8.120.0030 on Powermatic Associates

55.34.8.120.0030

Finder

Finder 55.34.8.120.0030 is a relay with a solder pin connection type, designed to handle rated currents of 7A at 250Vac (AC-1), 7A at 30Vdc (DC-1), 0.25A at 110Vdc (DC-1), and 0.12A at 220Vdc (DC-1). It features normally open (NO) auxiliary contacts for DC-1 applications. The supply voltage is specified as 4C/O or 4PDT (4 Pole Double Throw), with an ambient air temperature for operation at 350VA (230Vac, AC-15) and for storage at 1750VA (250Vac, AC-1). The rated voltage for AC operation is not specified, but the ambient air temperature range for operation is from -40 to +85 degrees Celsius. It uses a communication protocol labeled as C and offers protection functions at 250Vac. The net depth of the part is 37.2 mm, with a control voltage (AC) of 4 kV and a mounting mode width of 27.7 mm. The rated active power is for 4 poles, and the power consumption is indicated by a length of 20.7 mm. The color is defined by a 120Vac (50Hz/60Hz) specification, and it has a plug-in residual current sensitivity. The number of Normally Closed (NC) circuits is designed for 150,000 operations, with a length of AgNi (Silver Nickel) and a diameter supporting 20,000,000 operations.

9 in stock

Manufacturer warranty

62.32.9.024.0006 Finder

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Finder

Powermatic Associates is an authorized Finder distributor, proudly bringing you a diverse range of innovative products from this leading manufacturer renowned for its excellence in industrial automation and control solutions. With over 65 years of experience, Finder specializes in the design and production of high-quality electromechanical and electronic components tailored to meet diverse industr...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

62.33.9.125.0000 on Powermatic Associates

62.33.9.125.0000

Verified stock: 0

Finder 62.33.9.125.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for both operation and storage. The relay supports a communication protocol of type C, has a rated voltage of 125Vdc for its poles, and offers protection functions at 250Vac. Its control voltage (AC) is rated at 4 kV, with a rated active power of 3 poles. The design includes plug-in residual current sensitivity, and it is capable of 100,000 operations for Normally Closed (NC) circuits, with a lifespan of 30,000,000 operations. The contact material is AgCdO (Silver Cadmium Oxide), and the dimensions include a length specified by the design requirements.

Finder

62.33.9.024.0006 on Powermatic Associates

62.33.9.024.0006

Verified stock: 0

Finder 62.33.9.024.0006 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for both operation and storage. The relay supports a rated voltage of 24Vdc and a control voltage (AC) of 4 kV, with a rated active power of 3 poles. It features rear flange for residual current sensitivity, is capable of 100,000 operations for Normally Closed (NC) circuits, and has a mechanical endurance of 30,000,000 operations. The contact material is AgCdO (Silver Cadmium Oxide).

Finder

62.32.9.048.0000 on Powermatic Associates

62.32.9.048.0000

Verified stock: 0

Finder 62.32.9.048.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc, with a reduced current rating of 0.6A at 110Vdc and 0.4A at 220Vdc for DC-1 design. It features Normally Open (NO) auxiliary contacts for DC-1 applications. The supply voltage is specified for 2C/O or DPDT (Double Pole Double Throw) configurations, with an ambient air temperature for operation at 750VA (230Vac, AC-15) and for storage at 4000VA (250Vac, AC-1). The rated voltage for AC operation is supported up to 250Vac, with a control voltage (AC) tolerance of 4 kV. It is designed for a rated active power of 2 poles, with plug-in residual current sensitivity. The relay supports up to 100,000 operations for Normally Closed (NC) circuits and has a mechanical endurance of 30,000,000 operations. The contact material is AgCdO (Silver Cadmium Oxide), indicating its suitability for various applications within its specified ambient air temperature range for operation and storage of -40 to +70 degrees Celsius. The relay operates with a communication protocol of type C, is designed for a supply voltage of 48Vdc, and offers protection functions at 250Vac.

Finder

62.32.9.024.4060 on Powermatic Associates

62.32.9.024.4060

Verified stock: 0

Finder 62.32.9.024.4060 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation, and has a rated voltage for AC applications. The relay supports a communication protocol of type C, is designed for use with a control voltage (AC) of 4 kV, and has a rated active power of 2 poles. It features plug-in residual current sensitivity, a cross-section designed for diode use, and is capable of 100,000 operations for Normally Closed (NC) circuits, with a durability of 30,000,000 operations. The contact material is AgSnO2 (Silver / Tin Oxide).

Finder

62.32.8.240.0050 on Powermatic Associates

62.32.8.240.0050

Verified stock: 0

Finder 62.32.8.240.0050 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc, with a decrease in rated current to 0.6A at 110Vdc and 0.4A at 220Vdc for DC-1 design. It features Normally Open (NO) auxiliary contacts for DC-1, a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and operates within an ambient air temperature range of -40 to +70 degrees Celsius. The relay supports a control voltage (AC) of 4 kV and is rated for an active power of 2 poles at 240Vac (50Hz/60Hz). It is equipped with protection functions at 250Vac and has a residual current sensitivity with a plug-in design. The number of Normally Closed (NC) circuits is specified for 100,000 operations, with a mechanical endurance of 10,000,000 operations. The contacts are made from AgCdO (Silver Cadmium Oxide).

Finder

FAQ

Out if stock but available for backorder.

Finder 62.32.9.024.0006 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc, with a reduced current rating of 0.6A at 110Vdc and 0.4A at 220Vdc under DC-1 conditions. It features Normally Open (NO) auxiliary contacts for DC-1 applications. The supply voltage is specified for 2C/O or DPDT (Double Pole Double Throw) configurations, with an ambient air temperature for operation and storage rated at 750VA (230Vac, AC-15) and 4000VA (250Vac, AC-1) respectively. The rated voltage for AC operation spans a wide range, from -40 to +70 degrees Celsius, with a control voltage (AC) of 4 kV. This relay is designed with 2 poles, a rear flange for residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The contact material is AgCdO (Silver Cadmium Oxide), supporting up to 30,000,000 operations. The protection functions are rated for 250Vac, and the relay operates with a communication protocol of C, with a supply voltage requirement of 24Vdc.

Similar products from: Control Relays

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock