8036886 Festo Flow Sensors
Part#:8036886
Alt. Part#:SFAW-100T-CS520-E-PNLK-PNVBA-M12
Manufacturer:Festo
Category:Flow Sensors
Product Lifecycle:Active
Product description
flow sensor SFAW-100T-CS520-E-PNLK-PNVBA-M12 For measuring and monitoring flow rate, volume and temperature of liquid media, flow measuring range 100l/min. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* t
Product Details
- Flow measuring range start value 5 l/min
- Operating medium Liquid media Neutral liquids
- Ambient temperature 0 °C ... 50 °C
- Repetition accuracy of flow rate value < ±0.5 % FS for flow rate <= 50 % FS < ±1 % o.m.v. for flow rate >= 50 %FS
- Switching element function N/C contact/N/O contact switchable
- Max. load resistance of current output 500 Ohm
- IO-Link®, profile Smart sensor profile
- IO-Link®, minimum cycle time 5 ms
- Electrical connection 5-pin Plug, straight
- Degree of protection IP65
- Type code SFAW
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Measured variable Flow rate Temperature
- Information on operating pressure Max. 12 bar at 40°C Max. 6 bar at 100 °C
- Nominal temperature 23 °C
- Switching output 2 x PNP or 2 x NPN switchable
- Temperature characteristic curve start value 0 °C
- Short-circuit protection yes
- IO-Link®, SIO mode support Yes
- IO-Link®, service data contents IN 32 bit volume measurement
- IO-Link®, process data content IN 1 bit BDC (temperature monitoring) 2 bit BDC (flow monitoring)
- Max. cable length 20 m for IO-Link® operation 30 m
- Displayable unit(s) US gal °F
- Certification RCM compliance mark c UL us - Listed (OL)
- Note on materials RoHS-compliant
- Flow measuring range end value 100 l/min
- Temperature measuring range end value 90 °C
- Temperature co-efficient margin in ± %FS/K Typ. ±0.05% FS/K
- Flow characteristic curve, end value 100 l/min
- Temperature characteristic curve end value 100 °C
- IO-Link®, communication mode COM2 (38,4 kBd)
- IO-Link®, data memory required 500 byte
- Materials in contact with the media EPDM (peroxide) PA6T/6I-reinforced
- Fluid connector DIN 32676 DN20 terminal connection
- KC characters KC EMC
- Flow direction Unidirectional P1 -> P2
- Temperature measuring range start value 0 °C
- Temperature of medium 0 °C ... 90 °C
- Accuracy of flow rate ±2 % FS for flow rate <= 50 % FS ±3 % o.m.v. for flow rate >= 50 %FS
- Max. output current 100 mA
- Flow characteristic curve, start value 0 l/min
- Overload protection Available
- IO-Link®, protocol version Device V 1.1
- IO-Link®, port class A
- IO-Link®, process data width OUT 0 Byte
- Reverse polarity protection for all electrical connections
- Mounting position Any
- Housing material PA-reinforced
- Symbol 00995566
- Method of measurement Flow rate: vortex Temperature: PT1000
- Operating pressure 0 bar ... 12 bar
- Information on operating and pilot media Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances that come into contact with the media must be ensured.
- Accuracy of temperature in ± °C 2 °C
- Switching function Window comparator Freely programmable
- Analog output 0 - 10 V 1 - 5 V
- Min. load resistance of voltage output 15 kOhm
- Protocol IO-Link®
- IO-Link®, function classes Binary data channel (BDC) Teach channel
- IO-Link®, process data width IN 5 Byte
- DC operating voltage range 18 V ... 30 V
- Product weight 280 g
- Corrosion resistance class (CRC) 3 - High corrosion stress
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
8036886 Related Documents
Manufacturer warranty
8036886 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 8036886 with other products
Flow measuring range star...
Operating medium
Ambient temperature
Repetition accuracy of fl...
Switching element functio...
Max. load resistance of c...
IO-Link®, profile
IO-Link®, minimum cycle t...
Electrical connection
Degree of protection
Type code
CE marking (see declarati...
Measured variable
Information on operating ...
Nominal temperature
Switching output
Temperature characteristi...
Short-circuit protection
IO-Link®, SIO mode suppor...
IO-Link®, service data co...
IO-Link®, process data co...
Max. cable length
Displayable unit(s)
Certification
Note on materials
Flow measuring range end ...
Temperature measuring ran...
Temperature co-efficient ...
Flow characteristic curve...
Temperature characteristi...
IO-Link®, communication m...
IO-Link®, data memory req...
Materials in contact with...
Fluid connector
KC characters
Flow direction
Temperature measuring ran...
Temperature of medium
Accuracy of flow rate
Max. output current
Flow characteristic curve...
Overload protection
IO-Link®, protocol versio...
IO-Link®, port class
IO-Link®, process data wi...
Reverse polarity protecti...
Mounting position
Housing material
Symbol
Method of measurement
Operating pressure
Information on operating ...
Accuracy of temperature i...
Switching function
Analog output
Min. load resistance of v...
Protocol
IO-Link®, function classe...
IO-Link®, process data wi...
DC operating voltage rang...
Product weight
Corrosion resistance clas...
Pressure measuring range ...
Max. overload pressure
Electrical connection for...
Electrical connection 1, ...
Repetition accuracy in ± ...
Electrical connection 1, ...
Type of mounting
Setting options
Protection against tamper...
Electrical connection 1, ...
ADC resolution
Accuracy in ± % FS
Setting range threshold v...
Pressure measuring range ...
Temperature co-efficient ...
Rise time
Pneumatic connection
Display type
Setting range hysteresis
Selected product
8036886
Festo
flow sensor SFAW-100T-CS520-E-PNLK-PNVBA-M12 For measuring and monitoring flow rate, volume and temp...
Flow measuring range start value5 l/min
Operating mediumLiquid media Neutral liquids
Ambient temperature0 °C ... 50 °C
Repetition accuracy of flow rate value< ±0.5 % FS for flow rate <=...
Switching element functionN/C contact/N/O contact swit...
Max. load resistance of current output500 Ohm
IO-Link®, profileSmart sensor profile
IO-Link®, minimum cycle time5 ms
Electrical connection5-pin Plug, straight
Degree of protectionIP65
Type codeSFAW
CE marking (see declaration of conformity)As per EU EMC directive As p...
Measured variableFlow rate Temperature
Information on operating pressureMax. 12 bar at 40°C Max. 6 b...
Nominal temperature23 °C
Switching output2 x PNP or 2 x NPN switchabl...
Temperature characteristic curve start value0 °C
Short-circuit protectionyes
IO-Link®, SIO mode supportYes
IO-Link®, service data contents IN32 bit volume measurement
IO-Link®, process data content IN1 bit BDC (temperature monit...
Max. cable length20 m for IO-Link® operation ...
Displayable unit(s)US gal °F
CertificationRCM compliance mark c UL us ...
Note on materialsRoHS-compliant
Flow measuring range end value100 l/min
Temperature measuring range end value90 °C
Temperature co-efficient margin in ± %FS/KTyp. ±0.05% FS/K
Flow characteristic curve, end value100 l/min
Temperature characteristic curve end value100 °C
IO-Link®, communication modeCOM2 (38,4 kBd)
IO-Link®, data memory required500 byte
Materials in contact with the mediaEPDM (peroxide) PA6T/6I-rein...
Fluid connectorDIN 32676 DN20 terminal conn...
KC charactersKC EMC
Flow directionUnidirectional P1 -> P2
Temperature measuring range start value0 °C
Temperature of medium0 °C ... 90 °C
Accuracy of flow rate±2 % FS for flow rate <= 50 ...
Max. output current100 mA
Flow characteristic curve, start value0 l/min
Overload protectionAvailable
IO-Link®, protocol versionDevice V 1.1
IO-Link®, port classA
IO-Link®, process data width OUT0 Byte
Reverse polarity protectionfor all electrical connectio...
Mounting positionAny
Housing materialPA-reinforced
Symbol00995566
Method of measurementFlow rate: vortex Temperatur...
Operating pressure0 bar ... 12 bar
Information on operating and pilot mediaMedia with a kinematic visco...
Accuracy of temperature in ± °C2 °C
Switching functionWindow comparator Freely pro...
Analog output0 - 10 V 1 - 5 V
Min. load resistance of voltage output15 kOhm
ProtocolIO-Link®
IO-Link®, function classesBinary data channel (BDC) Te...
IO-Link®, process data width IN5 Byte
DC operating voltage range18 V ... 30 V
Product weight280 g
Corrosion resistance class (CRC)3 - High corrosion stress
Pressure measuring range initial value-
Max. overload pressure-
Electrical connection for input 1, connection pattern-
Electrical connection 1, number of pins/wires-
Repetition accuracy in ± %FS-
Electrical connection 1, connection type-
Type of mounting-
Setting options-
Protection against tampering-
Electrical connection 1, connection technology-
ADC resolution-
Accuracy in ± % FS-
Setting range threshold value-
Pressure measuring range end value-
Temperature co-efficient in ± %FS/K-
Rise time-
Pneumatic connection-
Display type-
Setting range hysteresis-
8035304
Festo
pressure sensor SPAU-P10R-MS4-F-L-PNLK-PNVBA-M12D Authorisation: (* RCM Mark, * c UL us - Listed (OL...
Flow measuring range start value-
Operating mediumCompressed air as per ISO 85...
Ambient temperature0 °C ... 50 °C
Repetition accuracy of flow rate value-
Switching element functionN/C contact/N/O contact swit...
Max. load resistance of current output500 Ohm
IO-Link®, profileSmart sensor profile
IO-Link®, minimum cycle time3 ms
Electrical connection-
Degree of protectionIP65
Type codeSPAU
CE marking (see declaration of conformity)As per EU EMC directive As p...
Measured variableRelative pressure
Information on operating pressure-
Nominal temperature-
Switching output2 x PNP or 2 x NPN switchabl...
Temperature characteristic curve start value-
Short-circuit protectionyes
IO-Link®, SIO mode supportYes
IO-Link®, service data contents IN-
IO-Link®, process data content IN14 bit PDV (pressure measure...
Max. cable length-
Displayable unit(s)MPa psi
CertificationRCM compliance mark c UL us ...
Note on materialsRoHS-compliant
Flow measuring range end value-
Temperature measuring range end value-
Temperature co-efficient margin in ± %FS/K-
Flow characteristic curve, end value-
Temperature characteristic curve end value-
IO-Link®, communication modeCOM2 (38,4 kBd)
IO-Link®, data memory required500 byte
Materials in contact with the media-
Fluid connector-
KC charactersKC EMC
Flow direction-
Temperature measuring range start value-
Temperature of medium0 °C ... 50 °C
Accuracy of flow rate-
Max. output current100 mA
Flow characteristic curve, start value-
Overload protection-
IO-Link®, protocol versionDevice V 1.1
IO-Link®, port classA
IO-Link®, process data width OUT0 Byte
Reverse polarity protectionfor all electrical connectio...
Mounting positionAny
Housing material-
Symbol00995410
Method of measurementPiezoresistive pressure sens...
Operating pressure-
Information on operating and pilot mediaOperation with oil lubricati...
Accuracy of temperature in ± °C-
Switching functionFreely programmable
Analog output0 - 10 V 1 - 5 V
Min. load resistance of voltage output10 kOhm
ProtocolIO-Link®
IO-Link®, function classesBinary data channel (BDC) Te...
IO-Link®, process data width IN2 Byte
DC operating voltage range20 V ... 30 V
Product weight80 g
Corrosion resistance class (CRC)2 - Moderate corrosion stres...
Pressure measuring range initial value0 bar
Max. overload pressure15 bar
Electrical connection for input 1, connection pattern00995386
Electrical connection 1, number of pins/wires4
Repetition accuracy in ± %FS0.3 %FS
Electrical connection 1, connection typePlug
Type of mountingOn service unit
Setting optionsIO-Link® Via display and pus...
Protection against tamperingIO-Link® PIN code
Electrical connection 1, connection technologyM12x1 A-coded as per EN 6107...
ADC resolution12 bit
Accuracy in ± % FS1.5 %FS
Setting range threshold value0 % ... 100 %
Pressure measuring range end value10 bar
Temperature co-efficient in ± %FS/K0.05 %FS/K
Rise time3 ms
Pneumatic connectionFlange
Display typeIlluminated LCD
Setting range hysteresis0 % ... 90 %
8001220
Festo
pressure sensor SPAU-P10R-H-G18FD-L-PNLK-PNVBA-M12U Suitable for monitoring compressed air and non-c...
Flow measuring range start value-
Operating mediumCompressed air as per ISO 85...
Ambient temperature0 °C ... 50 °C
Repetition accuracy of flow rate value-
Switching element functionN/C contact/N/O contact swit...
Max. load resistance of current output500 Ohm
IO-Link®, profileSmart sensor profile
IO-Link®, minimum cycle time3 ms
Electrical connection-
Degree of protectionIP65 IP67
Type codeSPAU
CE marking (see declaration of conformity)As per EU EMC directive As p...
Measured variableRelative pressure
Information on operating pressure-
Nominal temperature-
Switching output2 x PNP or 2 x NPN switchabl...
Temperature characteristic curve start value-
Short-circuit protectionyes
IO-Link®, SIO mode supportYes
IO-Link®, service data contents IN-
IO-Link®, process data content IN14 bit PDV (pressure measure...
Max. cable length-
Displayable unit(s)MPa psi
CertificationRCM compliance mark c UL us ...
Note on materialsRoHS-compliant
Flow measuring range end value-
Temperature measuring range end value-
Temperature co-efficient margin in ± %FS/K-
Flow characteristic curve, end value-
Temperature characteristic curve end value-
IO-Link®, communication modeCOM2 (38,4 kBd)
IO-Link®, data memory required500 byte
Materials in contact with the media-
Fluid connector-
KC charactersKC EMC
Flow direction-
Temperature measuring range start value-
Temperature of medium0 °C ... 50 °C
Accuracy of flow rate-
Max. output current100 mA
Flow characteristic curve, start value-
Overload protection-
IO-Link®, protocol versionDevice V 1.1
IO-Link®, port classA
IO-Link®, process data width OUT0 Byte
Reverse polarity protectionfor all electrical connectio...
Mounting positionAny
Housing material-
Symbol00995410
Method of measurementPiezoresistive pressure sens...
Operating pressure-
Information on operating and pilot mediaOperation with oil lubricati...
Accuracy of temperature in ± °C-
Switching functionFreely programmable
Analog output0 - 10 V 1 - 5 V
Min. load resistance of voltage output10 kOhm
ProtocolIO-Link®
IO-Link®, function classesBinary data channel (BDC) Te...
IO-Link®, process data width IN2 Byte
DC operating voltage range20 V ... 30 V
Product weight70 g
Corrosion resistance class (CRC)2 - Moderate corrosion stres...
Pressure measuring range initial value0 bar
Max. overload pressure15 bar
Electrical connection for input 1, connection pattern00995386
Electrical connection 1, number of pins/wires4
Repetition accuracy in ± %FS0.3 %FS
Electrical connection 1, connection typePlug
Type of mountingWith H-rail
Setting optionsIO-Link® Via display and pus...
Protection against tamperingIO-Link® PIN code
Electrical connection 1, connection technologyM12x1 A-coded as per EN 6107...
ADC resolution12 bit
Accuracy in ± % FS1.5 %FS
Setting range threshold value0 % ... 100 %
Pressure measuring range end value10 bar
Temperature co-efficient in ± %FS/K0.05 %FS/K
Rise time3 ms
Pneumatic connectionG1/8
Display typeIlluminated LCD
Setting range hysteresis0 % ... 90 %
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to electric drives and complete automation systems, Festo ensures that industries can achieve seamless operations and enhanced productivity. As specialists in motion and control technologies, Powermatic Associates supplies Festo's advanced pneumatics and electromechanical systems, designed to meet the rigorous demands of modern manufacturing environments. Festo's pneumatic cylinders and actuators are engineered for precision and reliability, providing optimal performance in a variety of applications, from simple handling tasks to complex automation processes. Festo's cutting-edge sensors and control units further complement these systems by delivering accurate data and enabling sophisticated process control, which are essential for smart factory initiatives. Moreover, Festo excels in modular automation solutions, allowing businesses to customize systems tailored specifically to their operational needs. Their energy-efficient pneumatic components and electric automation solutions are designed to reduce energy consumption and contribute to sustainable manufacturing practices. By integrating Festo’s products into their facilities, customers can streamline production processes, minimize downtime, and elevate overall operational efficiency. Powermatic Associates complements Festo's product range with our extensive value-added services, including expert engineering support and customized automation solutions. Our partnership with Festo allows us to provide superior technical assistance and rapid delivery from our well-stocked inventory. Whether you need precise fluid control, reliable actuation, or comprehensive system integration, Powermatic Associates and Festo together offer unparalleled service and solutions. Trust in our collaboration to harness the latest advancements in automation technology, ensuring your projects remain on track and your business achieves maximum profitability. Through this strategic partnership, Powermatic Associates and Festo empower industries to embrace innovation and maintain a competitive edge in the fast-evolving industrial landscape, driving forward efficiency, productivity, and sustainability.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
flow sensor SFAW-100T-CS520-E-PNLK-PNVBA-M12 For measuring and monitoring flow rate, volume and temperature of liquid media, flow measuring range 100l/min. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* t
What can I help you find today?
