8036877 Festo Flow Sensors

Product Details

• Nominal temperature
  23 °C
• Temperature co-efficient margin in ± %FS/K
  Typ. ±0.05% FS/K
• Max. load resistance of current output
  500 Ohm
• Short-circuit protection
  yes
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, port class
  A
• Reverse polarity protection
  for all electrical connections
• Product weight
  400 g
• Degree of protection
  IP65
• Symbol
  00995566
• Flow direction
  Unidirectional P1 -> P2
• Operating medium
  Liquid media Neutral liquids
• Temperature of medium
  0 °C ... 90 °C
• Accuracy of flow rate
  ±2 % FS for flow rate <= 50 % FS ±3 % o.m.v. for flow rate >= 50 %FS
• Switching element function
  N/C contact/N/O contact switchable
• Min. load resistance of voltage output
  15 kOhm
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data width IN
  3 Byte
• IO-Link®, data memory required
  500 byte
• Electrical connection
  5-pin Plug, straight
Housing material
PA-reinforced
KC characters
KC EMC
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Method of measurement
Flow rate: vortex Temperature: PT1000
Operating pressure
0 bar ... 12 bar
Information on operating and pilot media
Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances that come into contact with the media must be ensured.
Repetition accuracy of flow rate value
< ±0.5 % FS for flow rate <= 50 % FS < ±1 % o.m.v. for flow rate >= 50 %FS
Max. output current
100 mA
Overload protection
Available
IO-Link®, profile
Smart sensor profile
IO-Link®, service data contents IN
32 bit volume measurement
Fluid connector
Internal thread G1
Displayable unit(s)
US gal °F
Certification
RCM compliance mark c UL us - Listed (OL)
Note on materials
RoHS-compliant
Flow measuring range start value
5 l/min
Information on operating pressure
Max. 12 bar at 40°C Max. 6 bar at 100 °C
Switching output
2 x PNP or 2 x NPN switchable
Switching function
Window comparator Freely programmable
Flow characteristic curve, end value
100 l/min
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
5 ms
DC operating voltage range
18 V ... 30 V
Corrosion resistance class (CRC)
3 - High corrosion stress
Type code
SFAW
Measured variable
Flow rate Temperature
Flow measuring range end value
100 l/min
Ambient temperature
0 °C ... 50 °C
Accuracy of temperature in ± °C
2 °C
Analog output
0 - 10 V 1 - 5 V
Flow characteristic curve, start value
0 l/min
Protocol
IO-Link®
IO-Link®, process data width OUT
0 Byte
IO-Link®, process data content IN
1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
Max. cable length
20 m for IO-Link® operation 30 m
Mounting position
Any
Materials in contact with the media
EPDM (peroxide) PA6T/6I-reinforced

8036877 Related Documents