8023699 Festo Vacuum Generators

Product Details

• KC characters
  KC EMC
• Mounting position
  Any
• Short-circuit protection
  yes
• Switching input to standard
  IEC 61131-2
• Switching status indication
  Optical
• Max. vacuum
  93 %
• Max. suction rate with respect to atmosphere
  86.5 l/min
• Insulation voltage
  50 V
• Duty cycle
  100%
• Residual current
  0.1 mA
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Temperature of medium
  0 °C ... 50 °C
• Accuracy in ± % FS
  0.5 %FS
• Pneumatic connection 1
  QS-8
• Vacuum connection
  QS-8
• Material of pin contacts
  Brass, gold-plated
• Material of keypad
  PA-reinforced
• Nominal width of Laval nozzle
  2 mm
• Muffler construction type
  Open
• Manual override
  Non-detenting
Measuring principle
Piezoresistive
Valve function
Closed
Display type
LED
Switching position indication
LED
Operating pressure for max. vacuum
5.3 bar
Air supply time at nominal operating pressure
0.2 s
Max. output current
100 mA
Surge resistance
0.8 kV
Contamination level
3
Relative air humidity
5 - 85 %
Ambient temperature
0 °C ... 50 °C
Product weight
390 g
Electrical connection
5-pin Plug
Pneumatic connection 3
Pneumatic muffler integrated
Compressed air filter material
Fabric Sintered steel
Material of filter housing
PA-reinforced
Material of pins
Steel
Width dimension
20 mm
Ejector characteristics
High vacuum Standard
Design
Modular
Switching element function
N/O contact
Reverse polarity protection
for all electrical connections
Setting range threshold value
-1 bar ... 0 bar
Operating pressure
2 bar ... 8 bar
Nominal operating pressure
6 bar
DC operating voltage range
20.4 V ... 27.6 V
Switching output
PNP
Voltage drop
≤ 1.5 V
Information on operating and pilot media
Operation with oil lubrication not possible
Noise level at nominal operating pressure
74 dB(A)
Degree of protection
IP65
Protection class
III
Reproducibility, switching value FS
0.6 %
Female nozzle material
POM
Material of adjusting screw
Steel
Material of pneumatic fitting
Brass, nickel-plated
Integrated function
Ejector pulse valve, electric Vacuum switch
Switching function
Threshold value comparator Threshold value with fixed hysteresis
Inductive protective circuit
Adapted to MZ, MY and ME coils
Idle current
< 80 mA
Coil characteristics
24 V DC: low-current phase 0.3 W, high-current phase 2.55 W
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Max. tightening torque
0.8 Nm with internal thread 2.5 Nm with through-hole
Hysteresis
0.02 bar
Input switching logic
PNP (positive switching)
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Housing material
Die-cast aluminum PA-reinforced
Muffler material
Wrought aluminum alloy PU foam
Material of screws
Steel
Bracket material
Stainless steel
Type code
OVEM
Grade of filtration
40 µm
Measured variable
Relative pressure
Symbol
00992094
Setting options
Teach-in
Overload protection
Available
CE marking (see declaration of conformity)
As per EU EMC directive
Certification
RCM compliance mark c UL us - Listed (OL)
Pressure measuring range
-1 bar ... 0 bar
Type of mounting
With through-hole With accessories
Seals material
NBR
Hollow bolt material
Wrought aluminum alloy
Material of plug housing
Brass, nickel-plated
Material of jet nozzle
Wrought aluminum alloy

8023699 Related Documents