8005060 Festo Quarter Turn Actuators

Product Details

• Swivel angle
  92 deg
• Cushioning
  No cushioning
• Connection pressure for spring force
  3.5 bar
• ATEX category gas
  II 2G
• ATEX category for dust
  II 2D
• Torque at nominal operating pressure and 0° swivel angle
  900 Nm
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  29.4 l
• Product weight
  38800 g
• Cover material
  Wrought aluminum alloy
• Material of screws
  High-alloy steel
• Depth shaft connection
  38.5 mm
• Mode of operation
  Single-acting
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• Explosive ambient temperature
  -50°C <= Ta <= +60°C
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Spring return torque at 0° swivel angle
  300 Nm
• Spring return torque with 50° swivel angle
  225 Nm
• Note on materials
  RoHS-compliant
• Shaft material
  High-alloy steel
• Standard connection for valve
  ISO 5211
Position sensing
None
Closing direction
Clockwise closing
Operating pressure
3.5 bar ... 8.4 bar
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Torque at nominal operating pressure and 50° swivel angle
495 Nm
Spring return torque with 90° swivel angle
450 Nm
Pneumatic connection
G1/4
Housing material
Wrought aluminum alloy
Size of valve actuator
0720
Information on the end-position adjusting range
One end position optionally adjustable
Design
Scotch yoke system
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Ambient temperature
-20 °C ... 80 °C
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Spring force
2
Flange hole pattern
F12
Type code
DAPS
Mounting position
Any
Symbol
00991266
Nominal operating pressure
5.6 bar
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 90° swivel angle
750 Nm
Shaft connection
T36
Seals material
FPM PUR
Material number for shaft
1.4305

Related documents 8005060 Specs