8005037 Festo Quarter Turn Actuators

Product Details

• Mode of operation
  Single-acting
• Position sensing
  None
• Connection pressure for spring force
  5.6 bar
• Type of ignition protection for gas
  Ex h IIC T6...T3 Gb X
• Ambient temperature
  -20 °C ... 80 °C
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Spring return torque at 0° swivel angle
  80 Nm
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  5.6 l
• Note on materials
  RoHS-compliant
• Shaft material
  High-alloy steel
• Size of valve actuator
  0120
• Flange hole pattern
  F07 F10
• Information on the end-position adjusting range
  One end position optionally adjustable
• Symbol
  00991266
• ATEX category gas
  II 2G
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Torque at nominal operating pressure and 0° swivel angle
  120 Nm
• Spring return torque with 50° swivel angle
  60 Nm
• Shaft connection
  T22
• Material number for shaft
  1.4305
Swivel angle
92 deg
Cushioning
No cushioning
Closing direction
Clockwise closing
Operating pressure
5.6 bar ... 8.4 bar
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 90° swivel angle
80 Nm
Product weight
9000 g
Housing material
Wrought aluminum alloy
Depth shaft connection
24.8 mm
Mounting position
Any
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Nominal operating pressure
5.6 bar
Explosive ambient temperature
-50°C <= Ta <= +60°C
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Torque at nominal operating pressure and 50° swivel angle
60 Nm
Spring return torque with 90° swivel angle
120 Nm
Pneumatic connection
G1/8
Cover material
Wrought aluminum alloy
Material of screws
High-alloy steel
Type code
DAPS
Standard connection for valve
ISO 5211
Design
Scotch yoke system
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
ATEX category for dust
II 2D
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Spring force
4
Seals material
FPM PUR

8005037 Related Documents