8005032 Festo Quarter Turn Actuators

Product Details

• Flange hole pattern
  F07 F10
• Type code
  DAPS
• Cushioning
  No cushioning
• Closing direction
  Clockwise closing
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• ATEX category gas
  II 2G
• Type of (ignition) protection for dust
  Ex h IIIC T85°C...T200°C Db X
• CE marking (see declaration of conformity)
  as per EU explosion protection directive (ATEX)
• Torque at nominal operating pressure and 90° swivel angle
  82.5 Nm
• Pneumatic connection
  G1/8
• Cover material
  Wrought aluminum alloy
• Swivel angle
  92 deg
• Position sensing
  None
• Nominal operating pressure
  5.6 bar
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Torque at nominal operating pressure and 50° swivel angle
  56.5 Nm
• Product weight
  6800 g
• Housing material
  Wrought aluminum alloy
• Depth shaft connection
  24.8 mm
• Mounting position
  Any
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Connection pressure for spring force
4.2 bar
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Spring return torque with 90° swivel angle
67.5 Nm
Spring force
3
Note on materials
RoHS-compliant
Material number for shaft
1.4305
Size of valve actuator
0090
Information on the end-position adjusting range
One end position optionally adjustable
Mode of operation
Single-acting
Operating pressure
4.2 bar ... 8.4 bar
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Explosive ambient temperature
-50°C <= Ta <= +60°C
Torque at nominal operating pressure and 0° swivel angle
105 Nm
Spring return torque at 0° swivel angle
45 Nm
Material of screws
High-alloy steel
Seals material
FPM PUR
Standard connection for valve
ISO 5211
Design
Scotch yoke system
Symbol
00991266
ATEX category for dust
II 2D
Ambient temperature
-20 °C ... 80 °C
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Spring return torque with 50° swivel angle
33.9 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
3.85 l
Shaft connection
T22
Shaft material
High-alloy steel

8005032 Related Documents