8001218 Festo Pressure Sensors

Product Details

• Electrical connection for input 1, connection pattern
  00995386
• Rise time
  3 ms
• Short-circuit protection
  yes
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, process data width IN
  2 Byte
• Pneumatic connection
  QS-5/32
• Displayable unit(s)
  MPa psi
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Information on operating and pilot media
  Operation with oil lubrication possible
• ADC resolution
  12 bit
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Switching function
  Freely programmable
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• DC operating voltage range
  20 V ... 30 V
• Mounting position
  Any
• Setting range hysteresis
  0 % ... 90 %
• Protection against tampering
  IO-Link® PIN code
• KC characters
  KC EMC
• Symbol
  00995410
• Note on materials
  RoHS-compliant
Method of measurement
Piezoresistive pressure sensor
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Ambient temperature
0 °C ... 50 °C
Switching output
2 x PNP or 2 x NPN switchable
Max. load resistance of current output
500 Ohm
IO-Link®, protocol version
Device V 1.1
IO-Link®, SIO mode support
Yes
IO-Link®, data memory required
500 byte
Type of mounting
With H-rail
Display type
Illuminated LCD
Electrical connection 1, connection technology
M12x1 A-coded as per EN 61076-2-101
Electrical connection 1, number of pins/wires
4
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Measured variable
Relative pressure
Max. overload pressure
5 bar
Temperature of medium
0 °C ... 50 °C
Switching element function
N/C contact/N/O contact switchable
Analog output
0 - 10 V 1 - 5 V
Protocol
IO-Link®
IO-Link®, port class
A
Reverse polarity protection
for all electrical connections
Setting options
IO-Link® Via display and pushbuttons
Degree of protection
IP65 IP67
Type code
SPAU
Electrical connection 1, connection type
Plug
Certification
RCM compliance mark c UL us - Listed (OL)
Pressure measuring range end value
-1 bar
Pressure measuring range initial value
0 bar
Repetition accuracy in ± %FS
0.3 %FS
Accuracy in ± % FS
1.5 %FS
Max. output current
100 mA
Min. load resistance of voltage output
10 kOhm
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width OUT
0 Byte
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
IO-Link®, minimum cycle time
3 ms
Product weight
65 g
Setting range threshold value
0 % ... 100 %

8001218 Related Documents