8001217 Festo Pressure Sensors

Name: 8001217
Brand: Festo

Part#:8001217

Manufacturer:Festo

Alt. Part#:SPAU-V1R-H-T532D-L-PNLK-PNVBA-M8D

Product Lifecycle:Active

Get a quick Quote!

pressure sensor SPAU-V1R-H-T532D-L-PNLK-PNVBA-M8D Suitable for monitoring compressed air and non-corrosive gases, mounting H-rail, with display. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU direct

About the manufacturer: Festo is one of the manufacturers that offers Pressure Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8001217 Festo price in the box on the right side or send a quick quote.

Product Details

Electrical connection 1, connection technology
M8x1 A-coded as per EN 61076-2-104
Electrical connection 1, connection type
Plug
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Information on operating and pilot media
Operation with oil lubrication possible
ADC resolution
12 bit
Ambient temperature
0 °C ... 50 °C
Max. output current
100 mA
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width IN
2 Byte
Pneumatic connection
QS-5/32
Setting options
IO-Link® Via display and pushbuttons
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection for input 1, connection pattern
00991171
Symbol
00995410
Pressure measuring range initial value
0 bar
Accuracy in ± % FS
1.5 %FS
Switching element function
N/C contact/N/O contact switchable
Max. load resistance of current output
500 Ohm
IO-Link®, profile
Smart sensor profile
IO-Link®, SIO mode support
Yes

IO-Link®, data memory required

500 byte

Mounting position

Any

Protection against tampering

IO-Link® PIN code

Degree of protection

IP65 IP67

KC characters

KC EMC

Measured variable

Relative pressure

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas

Switching function

Freely programmable

Switching output

2 x PNP or 2 x NPN switchable

Analog output

0 - 10 V 1 - 5 V

IO-Link®, protocol version

Device V 1.1

IO-Link®, process data content IN

14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)

IO-Link®, process data width OUT

0 Byte

IO-Link®, minimum cycle time

3 ms

Displayable unit(s)

MPa psi

Setting range hysteresis

0 % ... 90 %

Certification

RCM compliance mark c UL us - Listed (OL)

Method of measurement

Piezoresistive pressure sensor

Max. overload pressure

5 bar

Pressure measuring range end value

-1 bar

Temperature co-efficient in ± %FS/K

0.05 %FS/K

Rise time

3 ms

Protocol

IO-Link®

Short-circuit protection

yes

IO-Link®, port class

Reverse polarity protection

for all electrical connections

Type of mounting

With H-rail

Setting range threshold value

0 % ... 100 %

Type code

SPAU

Electrical connection 1, number of pins/wires

Note on materials

RoHS-compliant

Temperature of medium

0 °C ... 50 °C

Repetition accuracy in ± %FS

0.3 %FS

Min. load resistance of voltage output

10 kOhm

IO-Link®, communication mode

COM2 (38,4 kBd)

DC operating voltage range

20 V ... 30 V

Product weight

65 g

Display type

Illuminated LCD

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

8001371

Verified stock: 3

manifold block NEFC-S1G25-C2W25-S7 Materials note: (* Contains PWIS substances, * Conforms to RoHS), Corrosion resistance classification CRC: 0 - No corrosion stress

Festo

8001220

Verified stock: 1

pressure sensor SPAU-P10R-H-G18FD-L-PNLK-PNVBA-M12U Suitable for monitoring compressed air and non-corrosive gases, mounting H-rail, with display. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU dire

Festo

DGST-10-80-Y12A

Verified stock: 0

Festo 8085169, Mini slide, configuration: DGST-10-80-Y12A

Festo

DGST-8-50-Y12A

Verified stock: 0

Festo Mini slide DGST-10-50-Y12A Stroke: 50 mm, Adjustable end-position range/front length: 15,1 mm, Adjustable end-position range/rear length: 15,3 mm, Piston diameter: 10 mm, Operating mode of drive unit: Yoke

Festo

DGST-16-150-Y12A

Verified stock: 0

Festo 8085182, Mini slide, configuration: DGST-16-150-Y12A

Festo

What can I help you find today?

Recommended parts

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

222

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls