8001214 Festo Pressure Sensors

Product Details

• Electrical connection for input 1, connection pattern
  00995386
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Note on materials
  RoHS-compliant
• Max. overload pressure
  5 bar
• Accuracy in ± % FS
  1.5 %FS
• Switching function
  Freely programmable
• Rise time
  3 ms
• Max. load resistance of current output
  500 Ohm
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, port class
  A
• Pneumatic connection
  QS-4
• Setting range hysteresis
  0 % ... 90 %
• Type code
  SPAU
• Symbol
  00995410
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Method of measurement
  Piezoresistive pressure sensor
• Ambient temperature
  0 °C ... 50 °C
• Analog output
  0 - 10 V 1 - 5 V
• Protocol
  IO-Link®
• IO-Link®, communication mode
  COM2 (38,4 kBd)
IO-Link®, process data width IN
2 Byte
Reverse polarity protection
for all electrical connections
Product weight
65 g
Displayable unit(s)
MPa psi
Electrical connection 1, connection technology
M12x1 A-coded as per EN 61076-2-101
KC characters
KC EMC
Electrical connection 1, number of pins/wires
4
Pressure measuring range end value
-1 bar
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Switching output
2 x PNP or 2 x NPN switchable
Max. output current
100 mA
Short-circuit protection
yes
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
DC operating voltage range
20 V ... 30 V
IO-Link®, minimum cycle time
3 ms
Display type
Illuminated LCD
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection 1, connection type
Plug
Measured variable
Relative pressure
Pressure measuring range initial value
0 bar
Temperature of medium
0 °C ... 50 °C
Repetition accuracy in ± %FS
0.3 %FS
Switching element function
N/C contact/N/O contact switchable
IO-Link®, protocol version
Device V 1.1
IO-Link®, SIO mode support
Yes
IO-Link®, data memory required
500 byte
Mounting position
Any
Setting range threshold value
0 % ... 100 %
Information on operating and pilot media
Operation with oil lubrication possible
ADC resolution
12 bit
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Min. load resistance of voltage output
10 kOhm
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width OUT
0 Byte
Type of mounting
With H-rail
Protection against tampering
IO-Link® PIN code
Degree of protection
IP65 IP67
Setting options
IO-Link® Via display and pushbuttons

8001214 Related Documents