575232 Festo Proportional Valves

Name: 575232
Brand: Festo

Festo 575232 proportional pressure regulator VPPM-12L-L-1-G12-0L10H-A4N-S1 Nominal diameter, pressurisation: 12 mm, Nominal diameter, exhaust: 12 mm, Type of actuation: electrical, Sealing principle: soft, Assembly position: Any

Part#:575232

Manufacturer:Festo

Alt. Part#:VPPM-12L-L-1-G12-0L10H-A4N-S1

Product Lifecycle:Active

Get a quick Quote!

proportional pressure regulator VPPM-12L-L-1-G12-0L10H-A4N-S1 Nominal diameter, pressurisation: 12 mm, Nominal diameter, exhaust: 12 mm, Type of actuation: electrical, Sealing principle: soft, Assembly position: Any

About the manufacturer: Festo is one of the manufacturers that offers Proportional Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 575232 Festo price in the box on the right side or send a quick quote.

Product Details

KC characters
KC EMC
Actuation type
Electrical
Design
Pilot-controlled diaphragm regulator
Valve function
3-way proportional pressure control valve
Standard nominal flow rate
7000 l/min
Switching output
NPN
Temperature of medium
10 °C ... 50 °C
Electrical connection
8-pin Plug
Housing material
Wrought aluminum alloy Anodized
Nominal width pressurization
12 mm
Short-circuit protection
For all electrical connections
Reverse polarity protection
for all electrical connections
DC operating voltage range
21.6 V ... 26.4 V
Analog input signal range
4 - 20 mA
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Certification
RCM compliance mark c UL us - Listed (OL)
Repetition accuracy FS
0.5 %
Exhaust nominal width
12 mm
Mounting position
Any
Display type
LED

Pressure regulation range

0.1 bar ... 10 bar

Max. current consumption

500 mA

Max. electrical power consumption

12 W

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas

CE marking (see declaration of conformity)

As per EU EMC directive

Degree of protection

IP65

Type of mounting

Optionally: With accessories

Pneumatic connection 2

G1/2

Type code

VPPM

Safety instructions

VPPM safety position: if the supply cable breaks, the outlet pressure is maintained in uncontrolled form.

Reset method

Mechanical spring

Inlet pressure 1

0 bar ... 11 bar

Duty cycle

100%

Information on operating and pilot media

Operation with oil lubrication not possible

Temperature coefficient

0.04 %/K

Pneumatic connection 1

G1/2

Note on materials

RoHS-compliant

Sealing principle

Soft

Symbol

00995303

Type of control

Pilot-controlled

Max. pressure hysteresis

0.05 bar

Residual ripple

10 %

Analog output signal range

4 - 20 mA

Ambient temperature

0 °C ... 60 °C

Product weight

2050 g

Linearity error FS

1 %

Pneumatic connection 3

G1/2

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EX-F71

Panasonic EX-F71 is a general-purpose leak detection sensor designed for liquid level monitoring. It features a polypropylene housing and comes equipped with a SUS stainless steel mounting bracket for secure installation. This sensor offers 1 x digital output (NPN open-collector / 24Vdc / 50mA) for straightforward integration into various systems. It is pre-wired with a 2m 3-core PFA cabtyre cable, terminated with bare flying leads for easy connection.

Panasonic

VB 4X1.5N-CS16

Actuator and Sensor Junction Box, 4 Port, Voltage 100 V, M12 eurofast Junction Box, 4 ports, Side exit M23 multifast home run connector, Plastic housing

Turck

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

191

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric