570039 Festo Electrical Peripheral Devices

Name: 570039
Brand: Festo

Part#:570039

Manufacturer:Festo

Category:Electrical Peripheral Devices

Alt. Part#:CTEU-DN

Product Lifecycle:Active

Get a quick Quote!

bus node CTEU-DN Dimensions W x L x H: 40 mm x 91 mm x 50 mm, Grid dimension: 40 mm, Mounting type: (* auf Elektrik-Anschaltung, * auf Elektrik-Anschlussplatte), Product weight: 90 g, Protocol: DeviceNet

About the manufacturer: Festo is one of the manufacturers that offers Electrical Peripheral Devices that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 570039 Festo price in the box on the right side or send a quick quote.

Product Details

KC characters
KC EMC
Fieldbus interface, type
CAN bus
Power supply, type of connection
Plug
Power supply, number of pins/wires
5
Type code
CTEU
DC operating voltage range
18 V ... 30 V
Nominal operating voltage DC
24 V
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Listed (OL)
LED display (product-specific)
PS: operating voltage for electronics and load supply X2: module system status at I-Port 2
Fieldbus interface, transmission rate
125 kbit/s 500 kbit/s
Fieldbus interface, connection technology
Sub-D
Width dimension
40 mm
Control elements
DIL switch
Parameterization
Diagnostic behavior Fail-safe and idle response
CE marking (see declaration of conformity)
As per EU EMC directive
Max. address capacity outputs
8 byte
LED display (bus-specific)
IO: I/O status MNS: network status
Type of mounting
On electrical interface On electrical sub-base
Note on fieldbus interface
Optional connection technology with accessories: Open style (screw terminal, 5-pin, degree of protection: IP20)

Power supply, connection technology

M12x1, B-coded as per EN 61076-2-101

Power supply, connection pattern

00995719

Note on degree of protection

In mounted state Unused connections sealed

Internal cycle time

1 ms per 1 byte of user data

Intrinsic current consumption at nominal operating voltage

Typ. 65 mA

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Ambient temperature

-5 °C ... 50 °C

Dimensions W x L x H

40 mm x 91 mm x 50 mm

Power supply, function

Electronics and load

Fieldbus interface, galvanic isolation

yes

Fieldbus interface, number of poles/wires

Configuration support

EDS file

Max. power supply

4 A

Product weight

90 g

Housing material

PA PC

Fieldbus interface, protocol

DeviceNet

Fieldbus interface, function

Bus connection, incoming/forwarding

Fieldbus interface, connection pattern

00995639

Fieldbus interface, connection type

Plug

Diagnostics

Communication error Undervoltage

Additional functions

Acyclic data access via "Explicit Message" System status can be indicated via process data

Protocol

DeviceNet

Degree of protection

IP65 IP67

Max. address capacity inputs

8 byte

Note on materials

Contains paint-wetting impairment substances RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

227

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric