558344 Festo Proportional Valves

Name: 558344
Brand: Festo

Festo 558344 proportional pressure regulator VPPM-6L-L-1-N18-0L6H-A4P-C1 Nominal diameter, pressurisation: 6 mm, Nominal diameter, exhaust: 4,5 mm, Type of actuation: electrical, Sealing principle: soft, Assembly position: Any

Part#:558344

Manufacturer:Festo

Alt. Part#:VPPM-6L-L-1-N18-0L6H-A4P-C1

Product Lifecycle:Active

Get a quick Quote!

proportional pressure regulator VPPM-6L-L-1-N18-0L6H-A4P-C1 Nominal diameter, pressurisation: 6 mm, Nominal diameter, exhaust: 4,5 mm, Type of actuation: electrical, Sealing principle: soft, Assembly position: Any

About the manufacturer: Festo is one of the manufacturers that offers Proportional Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 558344 Festo price in the box on the right side or send a quick quote.

Product Details

KC characters
KC EMC
Sealing principle
Soft
Symbol
00995303
Type of control
Pilot-controlled
Inlet pressure 1
0 bar ... 8 bar
DC operating voltage range
21.6 V ... 26.4 V
Analog input signal range
4 - 20 mA
Exhaust nominal width
4.5 mm
Type code
VPPM
Design
Pilot-controlled diaphragm regulator
Short-circuit protection
For all electrical connections
Reset method
Mechanical spring
Max. current consumption
300 mA
Residual ripple
10 %
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Degree of protection
IP65
Repetition accuracy FS
0.5 %
Pneumatic connection 2
1/8 NPT
Mounting position
Any
Reverse polarity protection
for all electrical connections

Pressure regulation range

0.06 bar ... 6 bar

Switching output

PNP

Information on operating and pilot media

Operation with oil lubrication not possible

Linearity error FS

2 %

Electrical connection

8-pin Plug

Pneumatic connection 3

1/8 NPT

Nominal width pressurization

6 mm

Display type

Back-lit LCD

Duty cycle

100%

Analog output signal range

4 - 20 mA

CE marking (see declaration of conformity)

As per EU EMC directive

Certification

RCM compliance mark c UL us - Listed (OL)

Pneumatic connection 1

1/8 NPT

Note on materials

RoHS-compliant

Actuation type

Electrical

Safety instructions

VPPM safety position: if the supply cable breaks, the outlet pressure is maintained in uncontrolled form.

Valve function

3-way proportional pressure control valve

Max. pressure hysteresis

0.03 bar

Standard nominal flow rate

900 l/min

Max. electrical power consumption

7 W

Ambient temperature

0 °C ... 50 °C

Temperature coefficient

0.04 %/K

Type of mounting

Optionally: With accessories

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Temperature of medium

10 °C ... 50 °C

Product weight

400 g

Housing material

Wrought aluminum alloy Anodized

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

RSC RKC 572-8.2M/TR2

DeviceNet™ Cordset, Extension Cordset, , Straight Male M12 eurofast Connector, Straight Female M12 eurofast Connector

Turck

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

DKF 28-27-1

Actuator and Sensor Receptacle, Front Mount, , Female M27 multifast Receptacle

Turck

242

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric