552886 Festo Quarter Turn Actuators

Name: 552886
Brand: Festo

Part#:552886

Manufacturer:Festo

Alt. Part#:DAPS-0060-090-RS4-F0507-CR

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DAPS-0060-090-RS4-F0507-CR single-acting, air connection to VDI/VDE 3845 Namur valves, direct flange mounting, stainless steel version. Size of actuator: 0060, Flange hole pattern: (* F05, * F07), Swivel angle: 90 deg, Shaft connection d

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 552886 Festo price in the box on the right side or send a quick quote.

Product Details

Size of valve actuator
0060
Depth shaft connection
16.3 mm
Mounting position
Any
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Nominal operating pressure
5.6 bar
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Corrosion resistance class (CRC)
3 - High corrosion stress
Spring return torque at 0° swivel angle
40 Nm
Spring return torque with 90° swivel angle
60 Nm
Pneumatic connection
G1/8
Material number for shaft
1.4301
Swivel angle
90 deg
Standard connection for valve
ISO 5211
Position sensing
None
Safety integrity level (SIL)
Up to SIL 2 high demand mode Up to SIL 2 low demand mode
ATEX category gas
II 2G
Ambient temperature
-20 °C ... 80 °C
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Torque at nominal operating pressure and 50° swivel angle
30 Nm
Spring force
4

Material number of cover

1.4408

Shaft material

High-alloy stainless steel

Design

Scotch yoke system

Symbol

00991266

Type of ignition protection for gas

Ex h IIC T6...T3 Gb X

Type of (ignition) protection for dust

Ex h IIIC T85°C...T200°C Db X

Spring return torque with 50° swivel angle

30 Nm

Shaft connection

T14

Housing material

High-alloy stainless steel

Seals material

FPM PUR

Flange hole pattern

F05 F07

Type code

DAPS

Mode of operation

Single-acting

Connection pressure for spring force

5.6 bar

ATEX category for dust

II 2D

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Torque at nominal operating pressure and 90° swivel angle

40 Nm

Product weight

4500 g

Cover material

High-alloy stainless steel

Material of screws

High-alloy stainless steel

Cushioning

No cushioning

Closing direction

Clockwise closing

Operating pressure

5.6 bar ... 8.4 bar

Explosive ambient temperature

-20°C <= Ta <= +60°C

CE marking (see declaration of conformity)

as per EU explosion protection directive (ATEX)

Torque at nominal operating pressure and 0° swivel angle

60 Nm

Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°

2.31 l

Note on materials

RoHS-compliant

Material number of housing

1.4408

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric