552872 Festo Quarter Turn Actuators
Part#:552872
Alt. Part#:DAPS-0120-090-R-F0507-CR
Manufacturer:Festo
Category:Quarter Turn Actuators
Product Lifecycle:Active
Product description
semi-rotary drive DAPS-0120-090-R-F0507-CR double-acting, air connection to VDI/VDE 3845 Namur valves, direct flange mounting, stainless steel version. Size of actuator: 0120, Flange hole pattern: (* F05, * F07), Swivel angle: 90 deg, Shaft connection dep
Product Details
- Size of valve actuator 0120
- Design Scotch yoke system
- Safety integrity level (SIL) Up to SIL 2 high demand mode Up to SIL 2 low demand mode
- ATEX category for dust II 2D
- Information on operating and pilot media Operation with oil lubrication possible (required for further use)
- Corrosion resistance class (CRC) 3 - High corrosion stress
- Product weight 3300 g
- Cover material High-alloy stainless steel
- Shaft material High-alloy stainless steel
- Standard connection for valve ISO 5211
- Mode of operation Double-acting
- Operating pressure 2.5 bar ... 8.4 bar
- Ambient temperature -20 °C ... 80 °C
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Torque at nominal operating pressure and 90° swivel angle 90 Nm
- Material number of cover 1.4408
- Material number for shaft 1.4301
- Flange hole pattern F05 F07
- Cushioning No cushioning
- Mounting position Any
- Nominal operating pressure 5.6 bar
- Type of (ignition) protection for dust Ex h IIIC T85°C...T200°C Db X
- Explosive ambient temperature -20°C <= Ta <= +60°C
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 4.06 l
- Note on materials RoHS-compliant
- Material of screws High-alloy stainless steel
- Depth shaft connection 16.3 mm
- Type code DAPS
- Closing direction Clockwise closing
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- ATEX category gas II 2G
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Torque at nominal operating pressure and 50° swivel angle 60 Nm
- Shaft connection T14
- Material number of housing 1.4408
- Housing material High-alloy stainless steel
- Swivel angle 90 deg
- Position sensing None
- Symbol 00991265
- Type of ignition protection for gas Ex h IIC T6...T3 Gb X
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Torque at nominal operating pressure and 0° swivel angle 120 Nm
- Pneumatic connection G1/8
- Seals material FPM PUR
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
552872 Related Documents
Manufacturer warranty
552872 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare 552872 with other products
Size of valve actuator
Design
Safety integrity level (S...
ATEX category for dust
Information on operating ...
Corrosion resistance clas...
Product weight
Cover material
Shaft material
Standard connection for v...
Mode of operation
Operating pressure
Ambient temperature
CE marking (see declarati...
Torque at nominal operati...
Material number of cover
Material number for shaft
Flange hole pattern
Cushioning
Mounting position
Nominal operating pressur...
Type of (ignition) protec...
Explosive ambient tempera...
Air consumption at 6 bar ...
Note on materials
Material of screws
Depth shaft connection
Type code
Closing direction
Valve connection conforms...
ATEX category gas
Explosion prevention and ...
Torque at nominal operati...
Shaft connection
Material number of housin...
Housing material
Swivel angle
Position sensing
Symbol
Type of ignition protecti...
Operating medium
Torque at nominal operati...
Pneumatic connection
Seals material
Max. torque Mz
Adjustable end-position r...
Impact energy in the end ...
Theoretical force at 6 ba...
Adjustable end-position r...
Guide
Max. force Fz
Drive unit operating mode
Max. speed
Cushioning length
Max. torque My
Piston rod material
Stroke
Repetition accuracy
Max. force Fy
Theoretical force at 6 ba...
Alternative connections
Piston diameter
Max. torque Mx
Moving mass
Type of mounting
Distance of centre of gra...
Max. payload as a functio...
Max. permissible torque l...
Selected product
552872
Festo
semi-rotary drive DAPS-0120-090-R-F0507-CR double-acting, air connection to VDI/VDE 3845 Namur valve...
Size of valve actuator0120
DesignScotch yoke system
Safety integrity level (SIL)Up to SIL 2 high demand mode...
ATEX category for dustII 2D
Information on operating and pilot mediaOperation with oil lubricati...
Corrosion resistance class (CRC)3 - High corrosion stress
Product weight3300 g
Cover materialHigh-alloy stainless steel
Shaft materialHigh-alloy stainless steel
Standard connection for valveISO 5211
Mode of operationDouble-acting
Operating pressure2.5 bar ... 8.4 bar
Ambient temperature-20 °C ... 80 °C
CE marking (see declaration of conformity)as per EU explosion protecti...
Torque at nominal operating pressure and 90° swivel angle90 Nm
Material number of cover1.4408
Material number for shaft1.4301
Flange hole patternF05 F07
CushioningNo cushioning
Mounting positionAny
Nominal operating pressure5.6 bar
Type of (ignition) protection for dustEx h IIIC T85°C...T200°C Db ...
Explosive ambient temperature-20°C <= Ta <= +60°C
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°4.06 l
Note on materialsRoHS-compliant
Material of screwsHigh-alloy stainless steel
Depth shaft connection16.3 mm
Type codeDAPS
Closing directionClockwise closing
Valve connection conforms to standardVDI/VDE 3845 (NAMUR)
ATEX category gasII 2G
Explosion prevention and protectionZone 1 (ATEX) Zone 22 (ATEX)
Torque at nominal operating pressure and 50° swivel angle60 Nm
Shaft connectionT14
Material number of housing1.4408
Housing materialHigh-alloy stainless steel
Swivel angle90 deg
Position sensingNone
Symbol00991265
Type of ignition protection for gasEx h IIC T6...T3 Gb X
Operating mediumCompressed air as per ISO 85...
Torque at nominal operating pressure and 0° swivel angle120 Nm
Pneumatic connectionG1/8
Seals materialFPM PUR
Max. torque Mz-
Adjustable end-position range/front length-
Impact energy in the end positions-
Theoretical force at 6 bar, retracting-
Adjustable end-position range/rear length-
Guide-
Max. force Fz-
Drive unit operating mode-
Max. speed-
Cushioning length-
Max. torque My-
Piston rod material-
Stroke-
Repetition accuracy-
Max. force Fy-
Theoretical force at 6 bar, advancing-
Alternative connections-
Piston diameter-
Max. torque Mx-
Moving mass-
Type of mounting-
Distance of centre of gravity of payload to yoke plate xs-
Max. payload as a function of the stroke at defined distance xs-
Max. permissible torque load Mx as a function of the stroke-
544034
Festo
mini slide DGSL-25-50-PA With position sensing, highly accurate, durable ball-cage guide, flexible d...
Size of valve actuator-
DesignYoke Slide
Safety integrity level (SIL)-
ATEX category for dust-
Information on operating and pilot mediaOperation with oil lubricati...
Corrosion resistance class (CRC)0 - No corrosion stress
Product weight3349 g
Cover materialWrought aluminum alloy
Shaft material-
Standard connection for valve-
Mode of operationDouble-acting
Operating pressure1 bar ... 8 bar
Ambient temperature0 °C ... 60 °C
CE marking (see declaration of conformity)-
Torque at nominal operating pressure and 90° swivel angle-
Material number of cover-
Material number for shaft-
Flange hole pattern-
CushioningElastic cushioning rings/pad...
Mounting positionAny
Nominal operating pressure-
Type of (ignition) protection for dust-
Explosive ambient temperature-
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°-
Note on materialsFree of copper and PTFE RoHS...
Material of screws-
Depth shaft connection-
Type codeDGSL
Closing direction-
Valve connection conforms to standard-
ATEX category gas-
Explosion prevention and protection-
Torque at nominal operating pressure and 50° swivel angle-
Shaft connection-
Material number of housing-
Housing materialWrought aluminum alloy
Swivel angle-
Position sensingFor proximity sensor
Symbol00991263
Type of ignition protection for gas-
Operating mediumCompressed air as per ISO 85...
Torque at nominal operating pressure and 0° swivel angle-
Pneumatic connectionG1/8
Seals materialHNBR
Max. torque Mz60 Nm
Adjustable end-position range/front length55 mm
Impact energy in the end positions0.55 J
Theoretical force at 6 bar, retracting415 N
Adjustable end-position range/rear length49 mm
GuideBall bearing cage guide
Max. force Fz4650 N
Drive unit operating modeYoke
Max. speed0.8 m/s
Cushioning length1.3 mm
Max. torque My60 Nm
Piston rod materialHigh-alloy stainless steel
Stroke50 mm
Repetition accuracy0.3 mm
Max. force Fy4650 N
Theoretical force at 6 bar, advancing483 N
Alternative connectionsSee product drawing
Piston diameter32 mm
Max. torque Mx120 Nm
Moving mass1244 g
Type of mountingWith through-hole
Distance of centre of gravity of payload to yoke plate xs-
Max. payload as a function of the stroke at defined distance xs-
Max. permissible torque load Mx as a function of the stroke-
170860
Festo
guided drive DFM-32-100-P-A-GF With integrated guide. Centre of gravity distance from working load t...
Size of valve actuator-
DesignGuide
Safety integrity level (SIL)-
ATEX category for dust-
Information on operating and pilot mediaOperation with oil lubricati...
Corrosion resistance class (CRC)1 - Low corrosion stress
Product weight3111 g
Cover materialWrought aluminum alloy
Shaft material-
Standard connection for valve-
Mode of operationDouble-acting
Operating pressure0.15 MPa ... 1 MPa
Ambient temperature-20 °C ... 80 °C
CE marking (see declaration of conformity)-
Torque at nominal operating pressure and 90° swivel angle-
Material number of cover-
Material number for shaft-
Flange hole pattern-
CushioningElastic cushioning rings/pad...
Mounting positionAny
Nominal operating pressure-
Type of (ignition) protection for dust-
Explosive ambient temperature-
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°-
Note on materialsRoHS-compliant
Material of screws-
Depth shaft connection-
Type codeDFM
Closing direction-
Valve connection conforms to standard-
ATEX category gas-
Explosion prevention and protection-
Torque at nominal operating pressure and 50° swivel angle-
Shaft connection-
Material number of housing-
Housing materialWrought aluminum alloy
Swivel angle-
Position sensingFor proximity sensor
Symbol00991737
Type of ignition protection for gas-
Operating mediumCompressed air as per ISO 85...
Torque at nominal operating pressure and 0° swivel angle-
Pneumatic connectionG1/8
Seals materialNBR
Max. torque Mz-
Adjustable end-position range/front length-
Impact energy in the end positions0.4 J
Theoretical force at 6 bar, retracting415 N
Adjustable end-position range/rear length-
GuideSliding guide
Max. force Fz-
Drive unit operating modeYoke
Max. speed0.8 m/s
Cushioning length-
Max. torque My-
Piston rod materialHigh-alloy stainless steel
Stroke100 mm
Repetition accuracy-
Max. force Fy-
Theoretical force at 6 bar, advancing482 N
Alternative connectionsSee product drawing
Piston diameter32 mm
Max. torque Mx-
Moving mass1564 g
Type of mounting-
Distance of centre of gravity of payload to yoke plate xs50 mm
Max. payload as a function of the stroke at defined distance xs150 N
Max. permissible torque load Mx as a function of the stroke5.8 Nm
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to electric drives and complete automation systems, Festo ensures that industries can achieve seamless operations and enhanced productivity. As specialists in motion and control technologies, Powermatic Associates supplies Festo's advanced pneumatics and electromechanical systems, designed to meet the rigorous demands of modern manufacturing environments. Festo's pneumatic cylinders and actuators are engineered for precision and reliability, providing optimal performance in a variety of applications, from simple handling tasks to complex automation processes. Festo's cutting-edge sensors and control units further complement these systems by delivering accurate data and enabling sophisticated process control, which are essential for smart factory initiatives. Moreover, Festo excels in modular automation solutions, allowing businesses to customize systems tailored specifically to their operational needs. Their energy-efficient pneumatic components and electric automation solutions are designed to reduce energy consumption and contribute to sustainable manufacturing practices. By integrating Festo’s products into their facilities, customers can streamline production processes, minimize downtime, and elevate overall operational efficiency. Powermatic Associates complements Festo's product range with our extensive value-added services, including expert engineering support and customized automation solutions. Our partnership with Festo allows us to provide superior technical assistance and rapid delivery from our well-stocked inventory. Whether you need precise fluid control, reliable actuation, or comprehensive system integration, Powermatic Associates and Festo together offer unparalleled service and solutions. Trust in our collaboration to harness the latest advancements in automation technology, ensuring your projects remain on track and your business achieves maximum profitability. Through this strategic partnership, Powermatic Associates and Festo empower industries to embrace innovation and maintain a competitive edge in the fast-evolving industrial landscape, driving forward efficiency, productivity, and sustainability.
About the Product Category
Quarter turn actuators are instruments that manage the opening and closing of valves through a 90-degree quarter turn. They enable automated or distant functioning, which allows for effective regulation of fluid flow in a range of applications.
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
semi-rotary drive DAPS-0120-090-R-F0507-CR double-acting, air connection to VDI/VDE 3845 Namur valves, direct flange mounting, stainless steel version. Size of actuator: 0120, Flange hole pattern: (* F05, * F07), Swivel angle: 90 deg, Shaft connection dep
What can I help you find today?
