550134 Festo Servo Motors

Product Details

• DC nominal voltage
  565 V
• Type code
  EMMS-AS
• Nominal rotary speed
  2600 1/min
• Rotor position sensor interface
  EnDat® 22
• Temperature monitoring
  PTC resistor
• Brake power consumption
  15.6 W
• Brake DC operating voltage
  24 V
• Winding inductance phase-phase
  20.5 mH
• Voltage constant, phase-to-phase
  130.69 mVmin
• Storage temperature
  -20 °C ... 60 °C
• Total output inertia moment
  9.271 kgcm²
• Peak torque
  25.6 Nm
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Conforms to standard
  IEC 60034
• Rotor position sensor
  Absolute encoder, multi-turn
• Rotor position sensor measuring principle
  Inductive
• Insulation protection class
  F
• Motor nominal power
  2600 W
• Phase-phase winding resistance
  3.39 Ohm
• Peak current
  15 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake mass moment of inertia
1.082 kgcm²
Permissible axial shaft load
200 N
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Electrical connection technology
Plug
Motor constants
2.166 Nm/A
Rotor position sensor resolution
19 bit
Rating class according to EN 60034-1
S1
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Degree of protection
IP54
Ambient temperature
-10 °C ... 40 °C
Nominal torque
9.55 Nm
Permissible radial shaft load
780 N
Product weight
10400 g
Number of pole pairs
6
Max. rotational speed
3060 1/min
Motor nominal current
4.4 A
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Brake holding torque
18 Nm
Stall torque
11.32 Nm
MTTFd, subcomponent
152 years, rotor position sensor
Note on materials
RoHS-compliant

550134 Related Documents