550133 Festo Servo Motors

Product Details

• Rotor position sensor interface
  EnDat® 22
• Insulation protection class
  F
• Motor nominal current
  4.4 A
• Rotor position sensor resolution
  18 bit
• Type code
  EMMS-AS
• Max. rotational speed
  3060 1/min
• Brake DC operating voltage
  24 V
• DC nominal voltage
  565 V
• Winding inductance phase-phase
  20.5 mH
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Total output inertia moment
  9.271 kgcm²
• Brake mass moment of inertia
  1.082 kgcm²
• Stall torque
  11.32 Nm
• MTTFd, subcomponent
  152 years, rotor position sensor
• Note on materials
  RoHS-compliant
• Number of pole pairs
  6
• Temperature monitoring
  PTC resistor
• Motor constants
  2.166 Nm/A
• Brake power consumption
  15.6 W
• Voltage constant, phase-to-phase
  130.69 mVmin
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
25.6 Nm
Product weight
10400 g
Phase-phase winding resistance
3.39 Ohm
Peak current
15 A
Storage temperature
-20 °C ... 60 °C
Degree of protection
IP54
Permissible axial shaft load
200 N
Conforms to standard
IEC 60034
Rotor position sensor
Absolute encoder, single-turn
Rotor position sensor measuring principle
Inductive
Nominal rotary speed
2600 1/min
Motor nominal power
2600 W
Type of winding switch
Star inside
Ambient temperature
-10 °C ... 40 °C
Nominal torque
9.55 Nm
Permissible radial shaft load
780 N
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Rating class according to EN 60034-1
S1
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Relative air humidity
0 - 90 %
Brake holding torque
18 Nm
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Electrical connection technology
Plug

550133 Related Documents