549684 Festo Quarter Turn Actuators

Name: 549684
Brand: Festo

Part#:549684

Manufacturer:Festo

Alt. Part#:DAPS-0720-090-RS4-F14

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DAPS-0720-090-RS4-F14 Single-acting, air connection as per VDI/VDE 3845, Namur valves can be directly flange-mounted Size of actuator: 0720, Flange hole pattern: F14, Swivel angle: 90 deg, End-position adjustment range at 0°: -1 - 9 deg,

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 549684 Festo price in the box on the right side or send a quick quote.

Product Details

End-position adjusting range at 0°
-1 deg ... 9 deg
Mounting position
Any
Connection pressure for spring force
5.6 bar
Ambient temperature
-20 °C ... 80 °C
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Torque at nominal operating pressure and 0° swivel angle
720 Nm
Spring return torque with 50° swivel angle
360 Nm
Shaft connection
T36
Pneumatic connection
G1/4
Information on the end-position adjusting range
One end position optionally adjustable
Mode of operation
Single-acting
Symbol
00991266
Nominal operating pressure
5.6 bar
ATEX category for dust
II 2D
Swivel angle
90 deg
Type code
DAPS
Design
Scotch yoke system
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Operating pressure
5.6 bar ... 8.4 bar
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)

Torque at nominal operating pressure and 50° swivel angle

360 Nm

Spring return torque at 0° swivel angle

480 Nm

Spring force

Seals material

FPM PUR

Material number for shaft

1.4305

Size of valve actuator

0720

Depth shaft connection

38.5 mm

Standard connection for valve

ISO 5211

Position sensing

None

Safety integrity level (SIL)

Up to SIL 2 high demand mode Up to SIL 2 low demand mode

Type of ignition protection for gas

Ex h IIC T6...T3 Gb X

Type of (ignition) protection for dust

Ex h IIIC T85°C...T200°C Db X

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Torque at nominal operating pressure and 90° swivel angle

480 Nm

Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°

29.4 l

Housing material

Wrought aluminum alloy

Flange hole pattern

F14

End-position adjusting range at nominal swivel angle

81 deg ... 91 deg

Cushioning

No cushioning

Closing direction

Clockwise closing

ATEX category gas

II 2G

Explosive ambient temperature

-20°C <= Ta <= +60°C

Corrosion resistance class (CRC)

3 - High corrosion stress

Spring return torque with 90° swivel angle

720 Nm

Note on materials

RoHS-compliant

Material of screws

High-alloy steel

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Note about the torque

The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.

Product weight

33000 g

Cover material

Wrought aluminum alloy

Shaft material

High-alloy steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

PKGTAB

Schneider Electric PKGTAB, Load center accessory, QO/Homeline, insulator kit, for ground bars

Schneider Electric