5340827 Festo Servo Amplifiers

Product Details

• Mounting position
  Free convection Vertical
• Encoder interface, function
  EnDat® 2.1 encoder SIN/COS encoder
• Synchronization interface, function
  Encoder emulation A/B/Z Encoder input A/B/Z
• Number of inputs for motor temperature sensor
  1
• Max. continuous output of the external braking resistor (IEC)
  600 W
• Number of safe 2-pin inputs
  2
• Time resolution of high-speed switching outputs
  1 µs
• Conforms to standard
  EN 61800-3 EN ISO 13849-1
• Control elements
  Optional: CDSB operating unit
• Fieldbus interface, function
  Bus connection, incoming/forwarding EtherNet/IP slave
• KC characters
  KC EMC
• Fieldbus interface, connection technology
  RJ45
• Overvoltage category
  III
• Number of floating switching outputs
  1
• Max. output current of holding brake
  1 A
• Max. short circuit protection of mains
  10 kA
• Max. current consumption for logic supply with parking brake
  1.5 A
• Mode of operation
  Field-oriented regulation 1x SYNC interface for encoder emulation or encoder input
• Safety integrity level (SIL)
  Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3
• Output frequency
  0 Hz ... 599 Hz
Hardware fault tolerance
1
Max. DC link voltage
800 V
Nominal current load supply
3 A
Peak power
3600 VA
Max. current consumption for logic supply with clamping brake and I/O
2.3 A
Relative air humidity
5 - 90 % Non-condensing
Number of analog setpoint inputs
1
Ethernet interface, protocol
TCP/IP
Encoder interface 2, function
Incremental encoder SIN/COS encoder
Pulse energy for braking resistor
850 Ws
Number of high-speed logic inputs
2
Time resolution of high-speed logic inputs
1 µs
Max. installation height
2000 m
Line filter
Integrated
Display
LED green/yellow/red
Braking resistor, external
130 Ohm ... 250 Ohm
Impedance of setpoint input
70 kOhm
Max. length of motor cable without ext. mains filter
50 m
Nominal voltage, logic supply DC
24 V
SFF safe failure fraction
99 %
Surge resistance
6 kV
Permissible range of logic voltage
± 20 %
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Certification
RCM compliance mark c UL us - Listed (OL)
Work range of logic input
-3 V ... 30 V
Encoder interface input, characteristics
1 MHz maximum output frequency max. 16384 ppr
Switching logic at outputs
PNP (positive switching)
Fieldbus interface, transmission rate
100 Mbit/s
Ethernet interface, function
Parameterization and commissioning
Protection class
I
Fieldbus interface, protocol
EtherNet/IP
Number of high-speed switching outputs
2
Max. current of the floating switching outputs
50 mA
Braking resistor nominal power (IEC)
48 W
Max. voltage drop from logic supply to brake output
0.8 V
Controller operating mode
Cascade control Autotuning
Performance Level (PL)
Safe brake control (SBC)/category 3, performance level e Safe torque off (STO)/category 4, performance level e
Braking resistor, integrated
130 Ohm
Pulse power of braking resistor
5 kVA
Nominal current per phase, effective
2.5 A
Peak current, load supply
9 A
Load supply permissible range
± 10 %
Degree of protection
IP20
Number of digital logic outputs 24 V DC
6
Logic input specification
Based on IEC 61131-2, type 3
Work range of setpoint input
± 10 V
Characteristics of logic input
Freely configurable in some cases Not galvanically isolated
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Type code
CMMT-AS
Information on max. installation height
1% power reduction/100 m above 1000 m.
Mains types
TN IT
Fieldbus interface, connection type
2x socket
Number of diagnostic outputs
2
System voltage to EN 61800-5-1
300 V
Based on norm
EN 50581 EN 62061
Active PFC
no
Safety function
Safe brake control (SBC) Safe stop 1 (SS1)
Characteristics of digital logic outputs
Freely configurable in some cases Diagnostic outputs in some cases
Max. peak current duration
2 s
Nominal operating voltage AC
400 V
Controller nominal power
1200 VA
Nominal operating voltage phases
3-phase
Peak current per phase, effective
7.5 A
Contamination level
2
Storage temperature
-25 °C ... 55 °C
Note on ambient temperature
Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C.
Product weight
2100 g
Process interfacing
Adjustable-Speed Drives Drives with positioning function
Output voltage range AC
3x (0 – input) V
Diagnostic coverage
97 %
Max. current of digital logic outputs
20 mA
Input voltage range AC
200 V ... 480 V
Nominal voltage, load supply DC
560 V
Mains frequency
48 Hz ... 62 Hz
Max. current consumption for logic supply without clamping brake
0.5 A
Certificate issuing authority
German Technical Control Board (TÜV) Rheinland 01/205/5640.00/18 UL E331130
Permissible voltage fluctuations
+/- 10 %
UL-ambient temperature
0 °C ... 40 °C
Communication profile
DriveProfile
Operating range of analog inputs
± 10 V
Characteristics of setpoint inputs
Differential inputs Configurable for current/force
Type of mounting
Mounting plate, screwed on
Number of digital logic inputs
12
Encoder interface output, characteristics
1 MHz maximum output frequency max. 16384 ppr
Input switching logic
PNP (positive switching)
Fieldbus coupling
EtherNet/IP

Related documents 5340827 Specs