187327 Festo Proportional Valves

Name: 187327
Brand: Festo

Part#:187327

Manufacturer:Festo

Alt. Part#:MPPES-3-1/2-10-420

Product Lifecycle:Active

Get a quick Quote!

proportional pressure regulator MPPES-3-1/2-10-420 Nominal diameter, pressurisation: 11 mm, Nominal diameter, exhaust: 12 mm, Type of actuation: electrical, Sealing principle: soft, Assembly position: Any

About the manufacturer: Festo is one of the manufacturers that offers Proportional Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 187327 Festo price in the box on the right side or send a quick quote.

Product Details

KC characters
KC EMC
Exhaust nominal width
12 mm
Sealing principle
Soft
Reverse polarity protection
for all electrical connections
Operating pressure
≤ 12 bar
Residual ripple
10 %
Temperature of medium
0 °C ... 60 °C
Electrical connection
8-pin Round design
Pneumatic connection 1
G1/2
Type of mounting
With through-hole
Type code
MPPES
Design
Pilot-controlled piston control valve
Symbol
00995304
Switching time off
450 ms
Setpoint/actual values
Current type 4–20 mA
CE marking (see declaration of conformity)
As per EU EMC directive
Ambient temperature
0 °C ... 50 °C
Note on materials
RoHS-compliant
Actuation type
Electrical
Mounting position
Any

Safety instructions

MPPES safety position: if the power supply cable breaks, the outlet pressure will drop to 0 bar.

Max. pressure hysteresis

0.05 bar

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Certification

RCM compliance mark

Pneumatic connection 2

G1/2

Diaphragm material

NBR

Pressure regulation range

0 bar ... 10 bar

On switching time

230 ms

DC operating voltage range

18 V ... 30 V

Degree of protection

IP65

Pneumatic connection 3

G1/2

Nominal width pressurization

11 mm

Short-circuit protection

For all electrical connections

Valve function

3-way proportional pressure control valve closed

Inlet pressure 1

11 bar ... 12 bar

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas

Product weight

2670 g

Housing material

Wrought aluminum alloy

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric