Powermatic Associates Logo

178463 Festo Actuator Accessories

178463 on Powermatic Associates
Festo

Part#:178463

Alt. Part#:KPE-6

Manufacturer:Festo

Category:Actuator Accessories

Product Lifecycle:Active

Product description

clamping unit KPE-6 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure MPa: <: 1

Product Details

  • Operating pressure
    ≤ 10 bar
  • Clamping type with active direction
    Both sides Clamped by spring, released by compressed air
  • Round material to be clamped
    6 mm
  • Material of spring
    Spring steel
  • Release pressure
    ≥ 3 bar
  • Design
    Hinge-down panes
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Product weight
    150 g
  • Material of piston
    POM
  • Mounting position
    Any
  • Information on operating and pilot media
    Operation with oil lubrication possible (required for further use)
  • Seals material
    NBR TPE-U(PU)
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Static holding force
    180 N
  • Housing material
    Aluminum Anodized
  • Type code
    KPE
  • Variants
    Piston rod at one end
  • Ambient temperature
    -10 °C ... 80 °C
  • Clamping jaws material
    Brass

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

178463 Related Documents

178463 DataSheet.pdf

Similar products from: Festo Actuator Accessories

537806 on Powermatic Associates

537806

Festo

mounting SMBZ-8-32/100 For attaching proximity switches with type 8 slot to cylinders with tie rod. Size: 8, Design: For tie rod, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Materials note: (* Free of copper and PTFE, * Conform

1 in stock
6140 on Powermatic Associates

6140

Festo

self-aligning rod coupler FK-M10X1,25 Compensates for angular and radial misalignment, for fitting on piston rod side. Size: M10x1,25, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Ambient temperature: -40 - 150 °C, Product weigh

2 in stock
34571 on Powermatic Associates

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock
3111 on Powermatic Associates

3111

Festo

rod clevis SG-M8 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M8, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M8, Corrosion resistance classification CRC: 1 - Low

2 in stock
151993 on Powermatic Associates

151993

Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly position: Any, Mode of operation: single-acting, Operating pressure: <: 6 bar

24 in stock
150914 on Powermatic Associates

150914

Festo

slot nut NST-5-M5 For mounting attachments. Container size: 1, Corrosion resistance classification CRC: 1 - Low corrosion stress, Product weight: 1,8 g, Materials note: Conforms to RoHS, Material slot nut: Heat-treatment steel

1 in stock

Manufacturer warranty

178463 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 178463 with other Actuator Accessories products

Operating pressure

Clamping type with active...

Round material to be clam...

Material of spring

Release pressure

Design

Operating medium

Product weight

Material of piston

Mounting position

Selected product

178463
Backordered
178463
Festo

clamping unit KPE-6 Assembly position: Any, Type of clamping with direction of action: (* at both en...

Operating pressure≤ 10 bar

Clamping type with active directionBoth sides Clamped by spring...

Round material to be clamped6 mm

Material of springSpring steel

Release pressure≥ 3 bar

DesignHinge-down panes

Operating mediumCompressed air as per ISO 85...

Product weight150 g

Material of pistonPOM

Mounting positionAny

34571
1 in stock
34571
Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly ...

Operating pressure-

Clamping type with active direction-

Round material to be clamped-

Material of spring-

Release pressure-

Design-

Operating medium-

Product weight-

Material of piston-

Mounting positionAny

151993
24 in stock
151993
Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly posit...

Operating pressure≤ 6 bar

Clamping type with active direction-

Round material to be clamped-

Material of spring-

Release pressure-

Design-

Operating mediumCompressed air as per ISO 85...

Product weight-

Material of piston-

Mounting positionAny

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Accessories for actuators are supplementary parts engineered to improve the efficiency and operation of actuator systems. These may encompass pneumatic cylinders, rotary actuators, rodless actuators, tie rod cylinders, and combination actuators, to name a few.

Actuator Accessories

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

clamping unit KPE-6 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure MPa: <: 1

Similar products from: Actuator Accessories

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock