Powermatic Associates Logo

178462 Festo Actuator Accessories

178462 on Powermatic Associates
Festo

Part#:178462

Alt. Part#:KPE-4

Manufacturer:Festo

Category:Actuator Accessories

Product Lifecycle:Active

Product description

clamping unit KPE-4 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure MPa: <: 1

Product Details

  • Type code
    KPE
  • Mounting position
    Any
  • Variants
    Piston rod at one end
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Material of spring
    Spring steel
  • Release pressure
    ≥ 3 bar
  • Round material to be clamped
    4 mm
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Static holding force
    80 N
  • Housing material
    Aluminum Anodized
  • Operating pressure
    ≤ 10 bar
  • Clamping type with active direction
    Both sides Clamped by spring, released by compressed air
  • Information on operating and pilot media
    Operation with oil lubrication possible (required for further use)
  • Product weight
    100 g
  • Material of piston
    POM
  • Design
    Hinge-down panes
  • Ambient temperature
    -10 °C ... 80 °C
  • Seals material
    NBR TPE-U(PU)
  • Clamping jaws material
    Brass

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

178462 Related Documents

178462 DataSheet.pdf

Similar products from: Festo Actuator Accessories

6140 on Powermatic Associates

6140

Festo

self-aligning rod coupler FK-M10X1,25 Compensates for angular and radial misalignment, for fitting on piston rod side. Size: M10x1,25, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Ambient temperature: -40 - 150 °C, Product weigh

2 in stock
537806 on Powermatic Associates

537806

Festo

mounting SMBZ-8-32/100 For attaching proximity switches with type 8 slot to cylinders with tie rod. Size: 8, Design: For tie rod, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Materials note: (* Free of copper and PTFE, * Conform

1 in stock
34571 on Powermatic Associates

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock
3111 on Powermatic Associates

3111

Festo

rod clevis SG-M8 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M8, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M8, Corrosion resistance classification CRC: 1 - Low

2 in stock
151993 on Powermatic Associates

151993

Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly position: Any, Mode of operation: single-acting, Operating pressure: <: 6 bar

24 in stock
150914 on Powermatic Associates

150914

Festo

slot nut NST-5-M5 For mounting attachments. Container size: 1, Corrosion resistance classification CRC: 1 - Low corrosion stress, Product weight: 1,8 g, Materials note: Conforms to RoHS, Material slot nut: Heat-treatment steel

1 in stock

Manufacturer warranty

178462 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 178462 with other Actuator Accessories products

Type code

Mounting position

Variants

Corrosion resistance clas...

Material of spring

Release pressure

Round material to be clam...

Operating medium

Static holding force

Housing material

Selected product

178462
Backordered
178462
Festo

clamping unit KPE-4 Assembly position: Any, Type of clamping with direction of action: (* at both en...

Type codeKPE

Mounting positionAny

VariantsPiston rod at one end

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Material of springSpring steel

Release pressure≥ 3 bar

Round material to be clamped4 mm

Operating mediumCompressed air as per ISO 85...

Static holding force80 N

Housing materialAluminum Anodized

34571
1 in stock
34571
Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly ...

Type codeYSR-C

Mounting positionAny

Variants-

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Material of spring-

Release pressure-

Round material to be clamped-

Operating medium-

Static holding force-

Housing material-

151993
24 in stock
151993
Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly posit...

Type codeEV

Mounting positionAny

Variants-

Corrosion resistance class (CRC)-

Material of spring-

Release pressure-

Round material to be clamped-

Operating mediumCompressed air as per ISO 85...

Static holding force-

Housing material-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Accessories for actuators are supplementary parts engineered to improve the efficiency and operation of actuator systems. These may encompass pneumatic cylinders, rotary actuators, rodless actuators, tie rod cylinders, and combination actuators, to name a few.

Actuator Accessories

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

clamping unit KPE-4 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure MPa: <: 1

Similar products from: Actuator Accessories

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock