1584948 Festo Servo Motors

Product Details

• Nominal rotary speed
  2900 1/min
• Motor nominal power
  6880 W
• Winding inductance phase-phase
  3.38 mH
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Relative air humidity
  0 - 90 %
• Brake mass moment of inertia
  3.8 kgcm²
• Permissible axial shaft load
  250 N
• Product weight
  27960 g
• Conforms to standard
  IEC 60034
• Number of pole pairs
  6
• Brake DC operating voltage
  24 V
• Motor nominal current
  14.24 A
• Rating class according to EN 60034-1
  S1
• Brake holding torque
  30 Nm
• Switching cycles, holding brake
  5 million idle actuations (without friction work!)
• Note on materials
  RoHS-compliant
• Rotor position sensor interface
  EnDat® 22
• Max. rotational speed
  4060 1/min
• Nominal operating voltage DC
  565 V
• Rotor position sensor resolution
  18 bit
Peak current
88.2 A
Ambient temperature
-10 °C ... 40 °C
Total output inertia moment
80.6 kgcm²
Stall torque
38.77 Nm
Rotor position sensor
Absolute encoder, single-turn
Temperature monitoring
PTC resistor
Motor constants
1.589 Nm/A
DC nominal voltage
565 V
Type of winding switch
Star inside
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
22.63 Nm
Permissible radial shaft load
1080 N
MTTFd, subcomponent
152 years, rotor position sensor
Type code
EMMS-AS
Rotor position sensor measuring principle
Inductive
Insulation protection class
F
Brake power consumption
17 W
Phase-phase winding resistance
0.265 Ohm
Voltage constant, phase-to-phase
98.6 mVmin
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Degree of protection
IP65
Peak torque
120 Nm
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Electrical connection technology
Plug

1584948 Related Documents