Powermatic Associates Logo

1584956 Festo Servo Motors

1584956 on Powermatic Associates
Festo

Part#:1584956

Manufacturer:Festo

Alt. Part#:EMMS-AS-190-MK-HS-AR-S1

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-190-MK-HS-AR-S1 Without gear unit. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1584956 Festo price in the box on the right side or send a quick quote.

Product Details

  • Max. rotational speed
    4060 1/min
  • Motor constants
    1.589 Nm/A
  • DC nominal voltage
    565 V
  • Peak current
    88.2 A
  • Relative air humidity
    0 - 90 %
  • Certification
    RCM compliance mark c UL us - Recognized (OL)
  • Permissible axial shaft load
    250 N
  • MTTFd, subcomponent
    228 years, rotor position sensor
  • Featherkey shaft design
    DIN 6885 A 10 x 8 x 40
  • Rotor position sensor
    Resolver
  • Motor nominal current
    14.24 A
  • Voltage constant, phase-to-phase
    98.6 mVmin
  • Degree of protection
    IP65
  • Total output inertia moment
    77 kgcm²
  • Product weight
    27100 g
  • Type code
    EMMS-AS
  • Rotor position sensor measuring principle
    Inductive
  • Insulation protection class
    F
  • Motor nominal power
    6880 W
  • Type of winding switch
    Star inside
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU low voltage directive
  • Ambient temperature
    -10 °C ... 40 °C
  • Stall torque
    38.77 Nm
  • MTTF, subcomponent
    114 years, rotor position sensor
  • Conforms to standard
    IEC 60034
  • Rotor position sensor interface
    SIN/COS analog signals
  • Temperature monitoring
    PTC resistor
  • Nominal operating voltage DC
    565 V
  • Winding inductance phase-phase
    3.38 mH
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Peak torque
    120 Nm
  • Note on materials
    RoHS-compliant
  • Number of pole pairs
    6
  • Nominal rotary speed
    2900 1/min
  • Phase-phase winding resistance
    0.265 Ohm
  • Rating class according to EN 60034-1
    S1
  • Storage temperature
    -20 °C ... 60 °C
  • Nominal torque
    22.63 Nm
  • Permissible radial shaft load
    1080 N
  • Electrical connection technology
    Plug

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents 1584956 Specs

1584956 1584956 DataSheet.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17