1584945 Festo Servo Motors

Name: 1584945
Brand: Festo

Part#:1584945

Manufacturer:Festo

Alt. Part#:EMMS-AS-190-MK-HS-ARB

Product Lifecycle:Active

Get a quick Quote!

servo motor EMMS-AS-190-MK-HS-ARB Without gear unit. Ambient temperature: -10 - 40 °C, Storage temperature: -20 - 60 °C, Relative air humidity: 0 - 90 %, Conforms to standard: IEC 60034, Insulation protection class: F

About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1584945 Festo price in the box on the right side or send a quick quote.

Product Details

Rotor position sensor interface
SIN/COS analog signals
Insulation protection class
F
Motor nominal power
6880 W
Winding inductance phase-phase
3.38 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Ambient temperature
-10 °C ... 40 °C
Permissible axial shaft load
250 N
MTTF, subcomponent
114 years, rotor position sensor 4469 years, holding brake
Number of pole pairs
6
Temperature monitoring
PTC resistor
Brake DC operating voltage
24 V
Phase-phase winding resistance
0.265 Ohm
Brake holding torque
30 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Note on materials
RoHS-compliant
Rotor position sensor
Resolver
Motor constants
1.589 Nm/A
DC nominal voltage
565 V
Peak current
88.2 A
Rating class according to EN 60034-1
S1

Relative air humidity

0 - 90 %

Total output inertia moment

80.6 kgcm²

Certification

RCM compliance mark c UL us - Recognized (OL)

Permissible radial shaft load

1080 N

Conforms to standard

IEC 60034

Max. rotational speed

4060 1/min

Nominal rotary speed

2900 1/min

Motor nominal current

14.24 A

Type of winding switch

Star inside

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Degree of protection

IP65

Brake mass moment of inertia

3.6 kgcm²

Peak torque

120 Nm

Product weight

28200 g

Featherkey shaft design

DIN 6885 A 10 x 8 x 40

Type code

EMMS-AS

Rotor position sensor measuring principle

Inductive

Brake power consumption

17 W

Nominal operating voltage DC

565 V

Voltage constant, phase-to-phase

98.6 mVmin

Storage temperature

-20 °C ... 60 °C

Nominal torque

22.63 Nm

Stall torque

38.77 Nm

MTTFd, subcomponent

228 years, rotor position sensor

Electrical connection technology

Plug

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

RSC RKC 572-8.2M/TR2

RSC RKC 572-8.2M/TR2 Turck - RSC RKC 572-8.2M/TR2 DeviceNet™ Cordset, Extension Cordset

Turck

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls