1584942 Festo Servo Motors

Product Details

• Brake DC operating voltage
  24 V
• Nominal operating voltage DC
  565 V
• Motor nominal current
  14.24 A
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Brake holding torque
  30 Nm
• Product weight
  27960 g
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Featherkey shaft design
  DIN 6885 A 10 x 8 x 40
• Rotor position sensor interface
  EnDat® 22
• Nominal rotary speed
  2900 1/min
• DC nominal voltage
  565 V
• Rotor position sensor resolution
  18 bit
• Type of winding switch
  Star inside
• Relative air humidity
  0 - 90 %
• Stall torque
  38.77 Nm
• Permissible radial shaft load
  1080 N
• MTTFd, subcomponent
  152 years, rotor position sensor
• Type code
  EMMS-AS
• Temperature monitoring
  PTC resistor
Motor constants
1.589 Nm/A
Phase-phase winding resistance
0.265 Ohm
Peak current
88.2 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Degree of protection
IP65
Nominal torque
22.63 Nm
Electrical connection technology
Plug
Conforms to standard
IEC 60034
Rotor position sensor
Absolute encoder, single-turn
Max. rotational speed
4060 1/min
Insulation protection class
F
Motor nominal power
6880 W
Voltage constant, phase-to-phase
98.6 mVmin
Storage temperature
-20 °C ... 60 °C
Total output inertia moment
80.6 kgcm²
Peak torque
120 Nm
Permissible axial shaft load
250 N
Note on materials
RoHS-compliant
Number of pole pairs
6
Rotor position sensor measuring principle
Inductive
Brake power consumption
17 W
Winding inductance phase-phase
3.38 mH
Rating class according to EN 60034-1
S1
Ambient temperature
-10 °C ... 40 °C
Brake mass moment of inertia
3.8 kgcm²
Switching cycles, holding brake
5 million idle actuations (without friction work!)

1584942 Related Documents