1584933 Festo Servo Motors

Product Details

• Number of pole pairs
  6
• Temperature monitoring
  PTC resistor
• Insulation protection class
  F
• Motor nominal current
  14.43 A
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Ambient temperature
  -10 °C ... 40 °C
• Brake holding torque
  30 Nm
• Product weight
  22200 g
• Featherkey shaft design
  DIN 6885 A 10 x 8 x 40
• Type code
  EMMS-AS
• Rotor position sensor measuring principle
  Inductive
• Motor constants
  1.211 Nm/A
• Winding inductance phase-phase
  3.07 mH
• Rating class according to EN 60034-1
  S1
• Voltage constant, phase-to-phase
  75.4 mVmin
• Brake mass moment of inertia
  3.6 kgcm²
• Permissible radial shaft load
  940 N
• Electrical connection technology
  Plug
• Nominal rotary speed
  3000 1/min
• Nominal operating voltage DC
  565 V
Phase-phase winding resistance
0.283 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Relative air humidity
0 - 90 %
Peak torque
80 Nm
Stall torque
26.2 Nm
MTTFd, subcomponent
228 years, rotor position sensor
Rotor position sensor
Resolver
Max. rotational speed
5300 1/min
Brake power consumption
17 W
DC nominal voltage
565 V
Type of winding switch
Star inside
Degree of protection
IP65
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
17.47 Nm
MTTF, subcomponent
114 years, rotor position sensor 4469 years, holding brake
Note on materials
RoHS-compliant
Rotor position sensor interface
SIN/COS analog signals
Brake DC operating voltage
24 V
Motor nominal power
5490 W
Peak current
77.2 A
Storage temperature
-20 °C ... 60 °C
Total output inertia moment
55.7 kgcm²
Permissible axial shaft load
250 N
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Conforms to standard
IEC 60034

1584933 Related Documents